scholarly journals Numerical Investigation of the Three-Dimensional Pressure Distribution in Taylor Couette Flow

2017 ◽  
Vol 139 (11) ◽  
Author(s):  
David Shina Adebayo ◽  
Aldo Rona
Keyword(s):  
Dynamic Pressure ◽  
Three Dimensional ◽  
Mechanical Efficiency ◽  
Navier Stokes ◽  
Cylinder Wall ◽  
Rotating Shaft ◽  
Number Range ◽  
Taylor Vortices ◽  
Delivery Pipe ◽  
Radial Outflow

An investigation is conducted on the flow in a moderately wide gap between an inner rotating shaft and an outer coaxial fixed tube, with stationary end-walls, by three-dimensional Reynolds-averaged Navier–Stokes (RANS) computational fluid dynamics (CFD), using the realizable k−ε  model. This approach provides three-dimensional spatial distributions of static and dynamic pressures that are not directly measurable in experiment by conventional nonintrusive optics-based techniques. The nonuniform pressure main features on the axial and meridional planes appear to be driven by the radial momentum equilibrium of the flow, which is characterized by axisymmetric Taylor vortices over the Taylor number range 2.35×106≤Ta≤6.47×106. Regularly spaced static and dynamic pressure maxima on the stationary cylinder wall follow the axial stacking of the Taylor vortices and line up with the vortex-induced radial outflow documented in previous work. This new detailed understanding has potential for application to the design of a vertical turbine pump head. Aligning the location where the gauge static pressure (GSP) maximum occurs with the central axis of the delivery pipe could improve the head delivery, the pump mechanical efficiency, the system operation, and control costs.

The Aerodynamics of Three-Dimensional Vaned Diffusers in Industrial Centrifugal Compressors

2005 ◽  
Author(s):  
Ahmed Abdelwahab
Keyword(s):  
Centrifugal Compressor ◽  
Dynamic Pressure ◽  
Three Dimensional ◽  
Pressure Recovery ◽  
Navier Stokes ◽  
Spanwise Direction ◽  
Two Dimensional ◽  
Blade Loading ◽  
Recovery Capacity ◽  
Close Proximity

Vaned diffusers have been used successfully as efficient and compact dynamic pressure recovery devices in industrial centrifugal compressor stages. Typically such diffusers consist of a cascade of two-dimensional blades distributed circumferentially at close proximity to the impeller exit. In this paper three low-solidity diffuser blade geometries are numerically investigated. The first geometry employs variable stagger stacking of similar blade sections along the blade span. The second employs linearly inclined stacking to generate blade lean along the diffuser span. The third geometry employs the conventional two-dimensional low-solidity diffuser geometry with no variable stagger or lean. The variable stagger blade arrangement has the potential of better aligning the diffuser leading edges with the highly non-uniform flow leaving the impeller. Both variable stagger and linearly leaned diffuser blade arrangements, however, have the effect of redistributing the blade loading and flow streamlines in the spanwise direction leading to improved efficiency and pressure recovery capacity of the diffuser. In this paper a description of the proposed diffuser geometries is presented. The results of Three-dimensional Navier-Stokes numerical simulations of the three centrifugal compressor arrangements are discussed. Comparisons between the performance of the two and three-dimensional diffuser blade geometries are presented. The comparisons indeed show that the variable stagger and leaned diffusers present an improvement in the diffuser operating range and pressure recovery capacity over the conventional two-dimensional diffuser geometry.

scholarly journals A Review of Passive Micromixers with a Comparative Analysis

Micromachines ◽  
2020 ◽  
Vol 11 (5) ◽  
pp. 455 ◽  
Author(s):  
Wasim Raza ◽  
Shakhawat Hossain ◽  
Kwang-Yong Kim
Keyword(s):  
Reynolds Number ◽  
Comparative Analysis ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Number Range ◽  
Pressure Drops ◽  
Convection Diffusion ◽  
Wide Range ◽  
Quantitative Analyses ◽  
Mixing Costs

A wide range of existing passive micromixers are reviewed, and quantitative analyses of ten typical passive micromixers were performed to compare their mixing indices, pressure drops, and mixing costs under the same axial length and flow conditions across a wide Reynolds number range of 0.01–120. The tested micromixers were selected from five types of micromixer designs. The analyses of flow and mixing were performed using continuity, Navier-Stokes and convection-diffusion equations. The results of the comparative analysis were presented for three different Reynolds number ranges: low-Re (Re ≤ 1), intermediate-Re (1 < Re ≤ 40), and high-Re (Re > 40) ranges, where the mixing mechanisms are different. The results show a two-dimensional micromixer of Tesla structure is recommended in the intermediate- and high-Re ranges, while two three-dimensional micromixers with two layers are recommended in the low-Re range due to their excellent mixing performance.

scholarly journals Design, Optimization and Analysis of Supersonic Radial Turbines

2019 ◽  
Author(s):  
Lukas Benjamin Inhestern ◽  
James Braun ◽  
Guillermo Paniagua ◽  
José Ramón Serrano Cruz
Keyword(s):  
High Performance ◽  
Ad Hoc ◽  
Three Dimensional ◽  
Critical Factor ◽  
Design Tool ◽  
Navier Stokes ◽  
Design Parameters ◽  
Design Variables ◽  
Compact Design ◽  
Radial Outflow

Abstract New compact engine architectures such as pressure gain combustion require ad-hoc turbomachinery to ensure an adequate range of operation with high performance. A critical factor for supersonic turbines is to ensure the starting of the flow passages, which limits the flow turning and airfoil thickness. Radial outflow turbines inherently increase the cross section along the flow path, which holds great potential for high turning of supersonic flow with a low stage number and guarantees a compact design. First the preliminary design space is described. Afterwards a differential evolution multi-objective optimization with 12 geometrical design parameters is deducted. With the design tool AutoBlade 10.1, 768 geometries were generated and hub, shroud, and blade camber line were designed by means of Bezier curves. Outlet radius, passage height, and axial location of the outlet were design variables as well. Structured meshes with around 3.7 million cells per passage were generated. Steady three dimensional Reynolds averaged Navier Stokes (RANS) simulations, enclosed by the k-omega SST turbulence model were solved by the commercial solver CFD++. The geometry was optimized towards low entropy and high power output. To prove the functionality of the new turbine concept and optimization, a full wheel unsteady RANS simulation of the optimized geometry exposed to a nozzled rotating detonation combustor (RDC) has been performed and the advantageous flow patterns of the optimization were also observed during transient operation.

Formation Process of Taylor Cells of a Surfactant Solution

2002 ◽  
Author(s):  
Keizo Watanabe ◽  
Tsukasa Takayama ◽  
Satoshi Ogata
Keyword(s):  
Formation Process ◽  
Tap Water ◽  
Surfactant Solution ◽  
Cylinder Wall ◽  
Number Range ◽  
Taylor Vortices ◽  
Surfactant Solutions ◽  
Flow Test ◽  
Stabilizing Effect ◽  
Shear Induced Structure

The flow of surfactant solutions between two coaxial cylinders was investigated using the laser-induced-fluorescence flow visualization technique to clarify the effect of drag-reducing additives on the formation process of Taylor cells in Taylor-Couette flow. Test fluids were Ethoquad O/12 10, 50 and 100 ppm surfactant solutions. In the Taylor number range of, 1.2×105 ≤ Ta ≤ 7.1×105, tap water and 10 ppm surfactant solution flows consisted of Taylor vortices and much smaller Go¨rtler vortices at the rotating inner cylinder wall. However, in 50 and 100 ppm surfactant solutions, Taylor vortices are not apparent and Go¨rtler vortices are collapsed. Measurement of the wavelength of Go¨rtler vortices led to the conclusion that surfactant solutions have a stabilizing effect on Go¨rtler instabilities. This effect depends on the concentration of surfactant solutions, and becomes considerable with increasing acceleration of the rotating inner cylinder. By considering the experimental results for the surfactant solutions without counterions, in which Taylor cells were not formed, it was shown that the increase in the local field viscosity based on the shear-induced structure of the surfactant solutions has a stabilizing effect on Go¨rtler instability.

scholarly journals Design, Optimization, and Analysis of Supersonic Radial Turbines

2020 ◽  
Vol 142 (3) ◽  
Author(s):  
Lukas Benjamin Inhestern ◽  
James Braun ◽  
Guillermo Paniagua ◽  
José Ramón Serrano Cruz
Keyword(s):  
High Performance ◽  
Ad Hoc ◽  
Three Dimensional ◽  
Critical Factor ◽  
Design Tool ◽  
Navier Stokes ◽  
Design Parameters ◽  
Design Variables ◽  
Compact Design ◽  
Radial Outflow

Abstract New compact engine architectures such as pressure gain combustion require ad hoc turbomachinery to ensure an adequate range of operation with high performance. A critical factor for supersonic turbines is to ensure the starting of the flow passages, which limits the flow turning and airfoil thickness. Radial outflow turbines inherently increase the cross section along the flow path, which holds great potential for high turning of supersonic flow with a low stage number and guarantees a compact design. First, the preliminary design space is described. Afterward a differential evolution multi-objective optimization with 12 geometrical design parameters is deducted. With the design tool autoblade 10.1, 768 geometries were generated and hub, shroud, and blade camber line were designed by means of Bezier curves. Outlet radius, passage height, and axial location of the outlet were design variables as well. Structured meshes with around 3.7 × 106 cells per passage were generated. Steady three-dimensional (3D) Reynolds-averaged Navier–Stokes (RANS) simulations, enclosed by the k-omega shear stress transport turbulence model were solved by the commercial solver CFD++. The geometry was optimized toward low entropy and high-power output. To prove the functionality of the new turbine concept and optimization, a full wheel unsteady RANS simulation of the optimized geometry exposed to a nozzled rotating detonation combustor (RDC) has been performed and the advantageous flow patterns of the optimization were also observed during transient operation.

Effects of stator splitter blades on aerodynamic performance of a single-stage transonic axial compressor

2020 ◽  
Vol 14 (4) ◽  
pp. 7369-7378
Author(s):  
Ky-Quang Pham ◽  
Xuan-Truong Le ◽  
Cong-Truong Dinh
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Numerical Results ◽  
Single Stage ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Operating Stability ◽  
Length Coverage

Splitter blades located between stator blades in a single-stage axial compressor were proposed and investigated in this work to find their effects on aerodynamic performance and operating stability. Aerodynamic performance of the compressor was evaluated using three-dimensional Reynolds-averaged Navier-Stokes equations using the k-e turbulence model with a scalable wall function. The numerical results for the typical performance parameters without stator splitter blades were validated in comparison with experimental data. The numerical results of a parametric study using four geometric parameters (chord length, coverage angle, height and position) of the stator splitter blades showed that the operational stability of the single-stage axial compressor enhances remarkably using the stator splitter blades. The splitters were effective in suppressing flow separation in the stator domain of the compressor at near-stall condition which affects considerably the aerodynamic performance of the compressor.

Experimental and Numerical Analysis of a Motorcycle Air Intake System Aerodynamics and Performance

2020 ◽  
Vol 17 (1) ◽  
Author(s):  
M. A. Abd Halim ◽  
N. A. R. Nik Mohd ◽  
M. N. Mohd Nasir ◽  
M. N. Dahalan
Keyword(s):  
Combustion Process ◽  
Three Dimensional ◽  
Engine Performance ◽  
Internal Flow ◽  
Rapid Expansion ◽  
Navier Stokes ◽  
Turbulent Fluctuation ◽  
Ansys Fluent ◽  
Induction System ◽  
Acceleration And Deceleration

Induction system or also known as the breathing system is a sub-component of the internal combustion system that supplies clean air for the combustion process. A good design of the induction system would be able to supply the air with adequate pressure, temperature and density for the combustion process to optimizing the engine performance. The induction system has an internal flow problem with a geometry that has rapid expansion or diverging and converging sections that may lead to sudden acceleration and deceleration of flow, flow separation and cause excessive turbulent fluctuation in the system. The aerodynamic performance of these induction systems influences the pressure drop effect and thus the engine performance. Therefore, in this work, the aerodynamics of motorcycle induction systems is to be investigated for a range of Cubic Feet per Minute (CFM). A three-dimensional simulation of the flow inside a generic 4-stroke motorcycle airbox were done using Reynolds-Averaged Navier Stokes (RANS) Computational Fluid Dynamics (CFD) solver in ANSYS Fluent version 11. The simulation results are validated by an experimental study performed using a flow bench. The study shows that the difference of the validation is 1.54% in average at the total pressure outlet. A potential improvement to the system have been observed and can be done to suit motorsports applications.

Aerodynamically accurate three-dimensional Navier-Stokes method

AIAA Journal ◽  
1997 ◽  
Vol 35 ◽  
pp. 1089-1090
Author(s):  
B. Epstein ◽  
A. Jacobs ◽  
A. Nachshon
Keyword(s):  
Three Dimensional ◽  
Navier Stokes
Sign in / Sign up

Export Citation Format

Share Document