scholarly journals An Investigation of Coolant Within Serpentine Passages of a High-Pressure Axial Gas Turbine Blade

2017 ◽  
Vol 139 (9) ◽  
Author(s):  
Jeremy Nickol ◽  
Randall Mathison ◽  
Michael Dunn ◽  
Jong Liu ◽  
Malak Malak
Keyword(s):  
Gas Turbine ◽  
Turbine Blade ◽  
Film Cooling ◽  
Cfd Simulation ◽  
Flow Behavior ◽  
Gas Turbine Blade ◽  
Airfoil Surface ◽  
Cross Sectional ◽  
Blowing Ratio ◽  
Serpentine Passages

Cooling flow behavior is investigated within the multiple serpentine passages with turbulators on the leading and trailing walls of an axial gas turbine blade operating at design-corrected conditions with accurate external flow conditions. Pressure and temperature measurements at midspan within the passages are obtained using miniature butt-welded thermocouples and miniature Kulite pressure transducers. These measurements, as well as airfoil surface pressure field data from a full computational fluid dynamics (CFD) simulation, are used as boundary conditions for a model that provides quantitative values of film-cooling blowing ratio for each film-cooling hole on the blade. The model accounts for the continuously changing cross-sectional area and shape of the channels, frictional pressure loss, convective heat transfer from the solid portion of the blade, massflow reduction as coolant bleeds out through film-cooling or impingement holes, compressibility effects, and the effects of blade rotation. The results of the model provide detailed coolant ejection information for a film-cooled rotating turbine airfoil operating at design-corrected conditions and also account for the highly variable freestream conditions on the airfoil. While these values are commonly known for simpler experimental geometries, they have previously either been unknown or estimated crudely for full-stage experiments of this nature. The better-quantified cooling parameters provide a bridge for better comparison with the wealth of film-cooling work already reported for simplified geometries. The calculation also shows the significant range in blowing ratio that can arise even among a single row of cooling holes associated with one of the turbulated passages, due to significant changes in both coolant and local freestream massfluxes.

An Investigation of Coolant Within Serpentine Passages of a High-Pressure Axial Gas Turbine Blade

2016 ◽  
Author(s):  
Jeremy B. Nickol ◽  
Randall M. Mathison ◽  
Michael G. Dunn ◽  
Jong S. Liu ◽  
Malak F. Malak
Keyword(s):  
Gas Turbine ◽  
Turbine Blade ◽  
Film Cooling ◽  
Cfd Simulation ◽  
Flow Behavior ◽  
Gas Turbine Blade ◽  
Airfoil Surface ◽  
Cross Sectional ◽  
Blowing Ratio ◽  
Serpentine Passages

Cooling flow behavior is investigated within the multiple serpentine passages with turbulators on the leading and trailing walls of an axial gas turbine blade operating at design-corrected conditions with accurate external flow conditions. Pressure and temperature measurements at midspan within the passages are obtained using miniature butt-welded thermocouples and miniature Kulite pressure transducers. These measurements, as well as airfoil surface pressure field data from a full CFD simulation, are used as boundary conditions for a model that provides quantitative values of film-cooling blowing ratio for each film cooling hole on the blade. The model accounts for the continuously changing cross-sectional area and shape of the channels, frictional pressure loss, convective heat transfer from the solid portion of the blade, massflow reduction as coolant bleeds out through film-cooling or impingement holes, compressibility effects, and the effects of blade rotation. The results of the model provide detailed coolant ejection information for a film-cooled rotating turbine airfoil operating at design-corrected conditions, and also accounts for the highly variable freestream conditions on the airfoil. While these values are commonly known for simpler experimental geometries, they have previously either been unknown or estimated crudely for full-stage experiments of this nature. The better-quantified cooling parameters provide a bridge for better comparison with the wealth of film-cooling work already reported for simplified geometries. The calculation also shows the significant range in blowing ratio that can arise even among a single row of cooling holes associated with one of the turbulated passages, due to significant changes in both coolant, and local freestream massfluxes.

scholarly journals Detailed Film Cooling Measurements over a Gas Turbine Blade Using a Transient Liquid Crystal Image Technique

2001 ◽  
Vol 7 (6) ◽  
pp. 415-424 ◽  
Author(s):  
Hui Du ◽  
Srinath V. Ekkad ◽  
Je-Chin Han ◽  
C. Pang Lee
Keyword(s):  
Heat Transfer ◽  
Liquid Crystal ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Film Cooling ◽  
Gas Turbine Blade ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Blowing Ratio ◽  
Image Technique

Detailed heat transfer coefficient and film effectiveness distributions over a gas turbine blade with film cooling are obtained using a transient liquid crystal image technique. The test blade has three rows of film holes on the leading edge and two rows each on the pressure and suction surfaces. A transient liquid crystal technique maps the entire blade midspan region, and helps provide detailed measurements, particularly near the film hole. Tests were performed on a five-blade linear cascade in a low-speed wind tunnel. The mainstream Reynolds number based on cascade exit velocity is5.3×105. Two different coolants (air andCo2) were used to simulate coolant density effect. Coolant blowing ratio was varied between 0.8 and 1.2 for air injection and 0.4–1.2 forCo2injection. Results show that film injection promotes earlier laminar-turbulent boundary layer transition on the suction surface and also enhances local heat transfer coefficients (up to 80%) downstream of injection. An increase in coolant blowing ratio produces higher heat transfer coefficients for both coolants. This effect is stronger immediately downstream of injection holes. Film effectiveness is highest at a blowing ratio of 0.8 for air injection and at a blowing ratio of 1.2 forCo2injection. Such detailed results will help provide insight into the film cooling phenomena on a gas turbine blade.

scholarly journals Experimental and Numerical Investigation of Effect of Blowing Ratio on Film Cooling Effectiveness and Heat Transfer Coefficient Over a Gas Turbine Blade Leading Edge Film Cooling Configurations

2013 ◽  
Author(s):  
Yepuri Giridhara Babu ◽  
Gururaj Lalgi ◽  
Ashok Babu Talanki Puttarangasetty ◽  
Jesuraj Felix ◽  
Sreenivas Rao V. Kenkere ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Film Cooling ◽  
Gas Turbine Blade ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Blowing Ratio

Film cooling is one of the cooling techniques to cool the hot section components of a gas turbine engines. The gas turbine blade leading edges are the vital parts in the turbines as they are directly hit by the hot gases, hence the optimized cooling of gas turbine blade surfaces is essential. This study aims at investigating the film cooling effectiveness and heat transfer coefficient experimentally and numerically for the three different gas turbine blade leading edge models each having the one row of film cooling holes at 15, 30 and 45 degrees hole orientation angle respectively from stagnation line. Each row has the five holes with the hole diameter of 3mm, pitch of 20mm and has the hole inclination angle of 20deg. in spanwise direction. Experiments are carried out using the subsonic cascade tunnel facility of National Aerospace Laboratories, Bangalore at a nominal flow Reynolds number of 1,00,000 based on the leading edge diameter, varying the blowing ratios of 1.2, 1.50, 1.75 and 2.0. In addition, an attempt has been made for the film cooling effectiveness using CFD simulation, using k-€ realizable turbulence model to solve the flow field. Among the considered 15, 30 and 45 deg. models, both the cooling effectiveness and heat transfer coefficient shown the increase with the increase in hole orientation angle from stagnation line. The film cooling effectiveness increases with the increase in blowing ratio upto 1.5 for the 15 and 30 deg. models, whereas on the 45 deg. model the increase in effectiveness shown upto the blowing ratio of 1.75. The heat transfer coefficient values showed the increase with the increase in blowing ratio for all the considered three models. The CFD results in the form of temperature, velocity contours and film cooling effectiveness values have shown the meaningful results with the experimental values.

Prediction of Film Cooling Effectiveness on a Gas Turbine Blade Leading Edge Using ANN and CFD

2018 ◽  
Vol 35 (2) ◽  
pp. 101-111 ◽  
Author(s):  
J. O. Dávalos ◽  
J. C. García ◽  
G. Urquiza ◽  
A. Huicochea ◽  
O. De Santiago
Keyword(s):  
Gas Turbine ◽  
Turbine Blade ◽  
Film Cooling ◽  
Leading Edge ◽  
Hole Diameter ◽  
Relative Importance ◽  
Gas Turbine Blade ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Blowing Ratio

Abstract In this work, the area-averaged film cooling effectiveness (AAFCE) on a gas turbine blade leading edge was predicted by employing an artificial neural network (ANN) using as input variables: hole diameter, injection angle, blowing ratio, hole and columns pitch. The database used to train the network was built using computational fluid dynamics (CFD) based on a two level full factorial design of experiments. The CFD numerical model was validated with an experimental rig, where a first stage blade of a gas turbine was represented by a cylindrical specimen. The ANN architecture was composed of three layers with four neurons in hidden layer and Levenberg-Marquardt was selected as ANN optimization algorithm. The AAFCE was successfully predicted by the ANN with a regression coefficient R2<0.99 and a root mean square error RMSE=0.0038. The ANN weight coefficients were used to estimate the relative importance of the input parameters. Blowing ratio was the most influential parameter with relative importance of 40.36 % followed by hole diameter. Additionally, by using the ANN model, the relationship between input parameters was analyzed.

Recent Advances in the Study of Film Cooling on the Gas Turbine Blade

2014 ◽  
Vol 971-973 ◽  
pp. 143-147 ◽  
Author(s):  
Ping Dai ◽  
Shuang Xiu Li
Keyword(s):  
Gas Turbine ◽  
Turbine Blade ◽  
Film Cooling ◽  
Gas Turbines ◽  
High Performance ◽  
Leading Edge ◽  
Development Trend ◽  
Research Progress ◽  
Gas Turbine Blade ◽  
New Generation

The development of a new generation of high performance gas turbine engines requires gas turbines to be operated at very high inlet temperatures, which are much higher than the allowable metal temperatures. Consequently, this necessitates the need for advanced cooling techniques. Among the numerous cooling technologies, the film cooling technology has superior advantages and relatively favorable application prospect. The recent research progress of film cooling techniques for gas turbine blade is reviewed and basic principle of film cooling is also illustrated. Progress on rotor blade and stationary blade of film cooling are introduced. Film cooling development of leading-edge was also generalized. Effect of various factor on cooling effectiveness and effect of the shape of the injection holes on plate film cooling are discussed. In addition, with respect to progress of discharge coefficient is presented. In the last, the future development trend and future investigation direction of film cooling are prospected.

Heat Transfer Coefficients and Film Cooling Effectiveness on the Squealer Tip of a Gas Turbine Blade

2003 ◽  
Vol 125 (4) ◽  
pp. 648-657 ◽  
Author(s):  
Jae Su Kwak ◽  
Je-Chin Han
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Film Cooling ◽  
Rotor Blade ◽  
Transfer Coefficients ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Heat Transfer Coefficients ◽  
Blowing Ratio

Experimental investigations were performed to measure the detailed heat transfer coefficients and film cooling effectiveness on the squealer tip of a gas turbine blade in a five-bladed linear cascade. The blade was a two-dimensional model of a first stage gas turbine rotor blade with a profile of the GE-E3 aircraft gas turbine engine rotor blade. The test blade had a squealer (recessed) tip with a 4.22% recess. The blade model was equipped with a single row of film cooling holes on the pressure side near the tip region and the tip surface along the camber line. Hue detection based transient liquid crystals technique was used to measure heat transfer coefficients and film cooling effectiveness. All measurements were done for the three tip gap clearances of 1.0%, 1.5%, and 2.5% of blade span at the two blowing ratios of 1.0 and 2.0. The Reynolds number based on cascade exit velocity and axial chord length was 1.1×106 and the total turning angle of the blade was 97.9 deg. The overall pressure ratio was 1.2 and the inlet and exit Mach numbers were 0.25 and 0.59, respectively. The turbulence intensity level at the cascade inlet was 9.7%. Results showed that the overall heat transfer coefficients increased with increasing tip gap clearance, but decreased with increasing blowing ratio. However, the overall film cooling effectiveness increased with increasing blowing ratio. Results also showed that the overall film cooling effectiveness increased but heat transfer coefficients decreased for the squealer tip when compared to the plane tip at the same tip gap clearance and blowing ratio conditions.

Sign in / Sign up

Export Citation Format

Share Document