A Numerical Study of Developing Buoyancy-Assisted Mixed Convection With Spatially Periodic Wall Heating

2017 ◽  
Vol 139 (8) ◽  
Author(s):  
Chris D. Dritselis
Keyword(s):  
Mixed Convection ◽  
Richardson Number ◽  
Numerical Study ◽  
Heat Fluxes ◽  
Computational Time ◽  
Convection Flow ◽  
Parabolic Model ◽  
Flow Modification ◽  
Elliptic Model ◽  
Spatially Periodic

The validity of a parabolic model for simulating the developing buoyancy-assisted mixed convection flow in a vertical channel with spatially periodic wall temperature is verified by a full elliptic model of the momentum and energy equations. A detailed assessment of the effects of the grid resolution, the Richardson number, the Reynolds number, and the preheating zone is presented through extensive comparisons of the velocity and temperature fields and spatial variations of pressure and local heat fluxes at the walls yielded by both models. The parabolic model is capable of reproducing the flow modification into a pattern consisting of a recirculating zone with increasing Richardson number, capturing adequately the main trends of the flow and heat transfer results. For certain combinations of the relevant nondimensional parameters, the solutions of the parabolic model agree reasonably well with those of the elliptic model from a quantitative point of view. In all the cases examined here, the computational time needed by the parabolic model is significantly smaller than that of the elliptic model.

scholarly journals Mixed convection in an eccentric annulus filled by copper nanofluid

2016 ◽  
Vol 20 (5) ◽  
pp. 1597-1608 ◽  
Author(s):  
Wael El-Maghlany ◽  
Elazm Abo ◽  
Ali Shahata ◽  
Yehia Eldrainy
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Numerical Study ◽  
Solid Volume Fraction ◽  
Convection Flow ◽  
Numerical Work ◽  
Remarkable Effect

A numerical study of mixed convection flow and heat transfer of Copper (Cu)-water nanofluid inside an eccentric horizontal annulus is presented. The inner and outer cylinders are kept at constant temperatures as Th and Tc, respectively. The inner cylinder rotates to generate the forced convection effect. The numerical work was carried out using an in-house CFD code written in FORTRAN. Different scenarios were explored to explain the effects of different parameters on the studied problem. These parameters are Richardson number, eccentricity ratio, and solid volume fraction. The range of the Richardson number Ri, solid volume fraction of the nanoparticles ?, and the eccentricity ratioe, are 0.01 ? Ri ? 100 (natural convection), 0 ? ? ? 0.05, 0 ? e ? 0.9 respectively. All results were performed with thermal Grashof number Gr, and radius ratio Rr, equaled to 104 and 2, respectively. The effects of eccentricity, nanoparticles volume fraction, and Richardson number on the average Nusselt number, streamlines and isotherms were investigated. Results were discussed, and were found to be in good agreement with previous works. It was also found that, the eccentricity has a positive remarkable effect on the average Nusselt number, while the effect of nanoparticles concentration was more pronounced at mixed convection region (Ri=1).

Effect of Nanofluid on Heat Transfer Enhancement for Mixed Convection Flow Over a Corrugated Surface

2020 ◽  
Vol 45 (4) ◽  
pp. 373-383
Author(s):  
Nepal Chandra Roy ◽  
Sadia Siddiqa
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Local Nusselt Number ◽  
Richardson Number ◽  
Thermal Boundary Layer ◽  
Volume Fraction ◽  
Convection Flow ◽  
Mixed Convection Flow

AbstractA mathematical model for mixed convection flow of a nanofluid along a vertical wavy surface has been studied. Numerical results reveal the effects of the volume fraction of nanoparticles, the axial distribution, the Richardson number, and the amplitude/wavelength ratio on the heat transfer of Al2O3-water nanofluid. By increasing the volume fraction of nanoparticles, the local Nusselt number and the thermal boundary layer increases significantly. In case of \mathrm{Ri}=1.0, the inclusion of 2 % and 5 % nanoparticles in the pure fluid augments the local Nusselt number, measured at the axial position 6.0, by 6.6 % and 16.3 % for a flat plate and by 5.9 % and 14.5 %, and 5.4 % and 13.3 % for the wavy surfaces with an amplitude/wavelength ratio of 0.1 and 0.2, respectively. However, when the Richardson number is increased, the local Nusselt number is found to increase but the thermal boundary layer decreases. For small values of the amplitude/wavelength ratio, the two harmonics pattern of the energy field cannot be detected by the local Nusselt number curve, however the isotherms clearly demonstrate this characteristic. The pressure leads to the first harmonic, and the buoyancy, diffusion, and inertia forces produce the second harmonic.

scholarly journals Mixed convection of functionalized DWCNT-water nanofluid in baffled lid-driven cavities

2018 ◽  
Vol 22 (6 Part A) ◽  
pp. 2503-2514 ◽  
Author(s):  
Esfe Hemmat ◽  
Arani Abbasian ◽  
Wei-Mon Yan ◽  
Alireza Aghaie ◽  
Masoud Afrand ◽  
...  
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Minimum Length ◽  
Convection Flow ◽  
Flow And Heat Transfer ◽  
Inclination Angles ◽  
Nanoparticles Volume Fraction

The present study aims to evaluate the mixed convection flow and heat transfer of functionalized DWCNT/water nanofluids with variable properties in a cavity having hot baffles. The investigation is performed at different nanoparticles volume fraction including 0, 0.0002, 0.001, 0.002, and 0.004, Richardson numbers ranging from 0.01 to 100, inclination angles ranging from 0 to 60? and at constant Grashof number of 104. The results presented as streamlines and isotherms plot and Nusselt number diagrams. According to the finding with increasing nanoparticles volume fraction and distance between the left hot baffles of nanoparticles average Nusselt number enhances for all considered Richardson numbers and cavity inclination angles. Also with increasing Richardson number, the rate of changes of average Nusselt number increase with increasing distance between the left hot baffles. For example, at Richardson number of 0.01, by increasing L1 from 0.4 to 0.6, the average Nusselt number increases 7%; while for similar situation at Richardson number of 0.1, 1.0, and 10, the average Nusselt number increases, respectively, 17%, 24%, and 26%. At all Richardson numbers, the maximum value of average Nusselt number is achieved for a minimum length of left baffles. <br><br><font color="red"><b> This article has been corrected. Link to the correction <u><a href="http://dx.doi.org/10.2298/TSCI190203032E">10.2298/TSCI190203032E</a><u></b></font>

Numerical study of laminar mixed convection flow in a lid-driven square cavity filled with porous media

2018 ◽  
Vol 28 (4) ◽  
pp. 857-877 ◽  
Author(s):  
Najib Hdhiri ◽  
Brahim Ben Beya
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Porous Media ◽  
Mixed Convection ◽  
Transfer Rate ◽  
Richardson Number ◽  
Convection Flow ◽  
Brinkman Model ◽  
Mixed Convection Flow ◽  
Content Type

Purpose The purpose of this study is to produce a numerical model capable of predicting the mixed convection flows in a rectangular cavity filled with a porous medium and to analyze the effects of several parameters on convective flow in porous media in a differentially heated enclosure. Design/methodology/approach The authors used the finite volume method. Findings The authors predicted and analyzed the effects of Richardson number, Darcy number, porosity values and Prandtl number in heat transfer and fluid flow. On other hand, the porosity and Richardson number values lead to reducing the heat transfer rate of mixed convection flow in a porous medium. Originality/value A comparison between Darcy–Brinkman–Forchheimer model and Darcy–Brinkman model is discussed and analyzed. The authors finally conclude that the Darcy–Brinkman model overestimates the heat transfer rate.

Sign in / Sign up

Export Citation Format

Share Document