Numerical Study of Laser Shock Peening Effects on Alloy 600 Nozzles With Initial Residual Stresses

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Ji-Soo Kim ◽  
Hyun-Suk Nam ◽  
Yun-Jae Kim ◽  
Ju-Hee Kim
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Numerical Study ◽  
Laser Shock Peening ◽  
Tensile Residual Stress ◽  
Alloy 600 ◽  
Laser Shock ◽  
Near Surface ◽  
Rate Dependent ◽  
Shock Peening

This paper investigates the effect of initial residual stress and prestrain on residual stresses due to laser shock peening for Alloy 600 using numerical simulation. For simulation, the strain rate dependent Johnson–Cook hardening model with a Mie–Grüneisen equation of state is used. Simulation results are compared with published experimental data, showing good agreement. It is found that the laser shock peening (LSP) process is more effective for higher initial tensile residual stress and for larger initial prestrain in terms of compressive stress at the near surface. However, the effective depth decreases with increasing initial tensile residual stress and initial prestrain.

Experimental and Numerical Analysis of the Distribution of Residual Stresses Induced by Laser Shock Peening in a 2050-T8 Aluminium Alloy

2011 ◽  
Vol 681 ◽  
pp. 296-302 ◽  
Author(s):  
Neila Hfaiedh ◽  
P. Peyre ◽  
I. Popa ◽  
Vincent Vignal ◽  
Wilfrid Seiler ◽  
...  
Keyword(s):  
Residual Stress ◽  
Stress Distribution ◽  
Residual Stresses ◽  
Aluminium Alloy ◽  
Residual Stress Distribution ◽  
Laser Shock Peening ◽  
Treatment Technique ◽  
Laser Shock ◽  
X Ray Diffraction ◽  
Shock Peening

Laser shock peening (LSP) is an innovative surface treatment technique successfully applied to improving fatigue performance of metallic material. The specific characteristic of (LSP) is the generation of a low work-hardening and a deep compressive residual stresses mechanically produced by a laser-induced shock wave propagating in the material. The aim of this study is to analyse the residual stress distribution induced by laser peening in 2050-T8 aluminium alloy experimentally by the X-ray diffraction technique (method sin2Y) and numerically, by a finite element numerical modelling. A specific focus was put on the residual stress distribution along the surface of the impacted material.

scholarly journals An Approach to Predict the Residual Stress-Depth-Profile of Thin Sheet Metal Processed by Laser Shock Peening Without Coating

2021 ◽  
Vol 1135 (1) ◽  
pp. 012025
Author(s):  
Tobias Valentino ◽  
Andreas Stephen ◽  
Tim Radel
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Depth Profile ◽  
Thin Sheet ◽  
Laser Shock Peening ◽  
Stress Profile ◽  
Thin Sheets ◽  
Laser Shock ◽  
Process Step ◽  
Shock Peening

Abstract For conventional laser shock peening, the positive influence of compressive residual stresses on fatigue strength is well understood. To protect the material’s surface from ablation, a sacrificial layer is applied. This, however, leads to an additional process step, which deteriorates its economic efficiency. Thus, laser shock peening without coating (LPwC) is more frequently investigated for industrial applications. However, LPwC increases the thermal impact on the material, which may provoke tensile residual stresses in the surface region. In this regard, understanding the influence of LPwC on the residual stress state and deriving a suitable state, e.g., for subsequent applications or forming operations, result in a design of experiment with numerous residual stress measurements. Residual stress-depth-profiles obtained by X-ray diffraction are time-consuming and cost intensive. Hence, a model is proposed to predict the residual stress-depth-profile of LPwC-processed thin sheets. The analytical model is based on the source stress model and uses experimental results, namely hardness as well as shape change measurements. Sheets made of X5CrNi18-10 and with a thickness of 1 mm are LPwC-processed with a nanosecond fiber laser. In the thermally dominated area where tensile residual stresses are present, the model agrees well with the experimental measurements. Moreover, it is revealed that LPwC leads to a saturation of residual stress level maximum and depth in dependence of pulse energy, repetition rate and number of repetitions. Subsequently, the model is used for tailoring the stress profile of thin sheets by LPwC for subsequent bottom bending.

Residual Stress State and Fatigue Behaviour of Laser Shock Peened Titanium Alloys

2006 ◽  
Vol 524-525 ◽  
pp. 129-134 ◽  
Author(s):  
I. Altenberger ◽  
Yuji Sano ◽  
M.A. Cherif ◽  
Ivan Nikitin ◽  
Berthold Scholtes
Keyword(s):  
Residual Stress ◽  
Titanium Alloys ◽  
Cold Work ◽  
Fatigue Behaviour ◽  
Laser Shock Peening ◽  
Fatigue Properties ◽  
Stress Profile ◽  
Laser Shock ◽  
Near Surface ◽  
Shock Peening

Laser shock peening is a very effective mechanical surface treatment to enhance the fatigue behaviour of highly stressed components. In this work the effect of different laser shock peening conditions on the residual stress depth profile and fatigue behaviour without any sacrificial coating layer is investigated for two high strength titanium alloys, Ti-6Al-4V and Timetal LCB. The results show that the optimization of peening conditions is crucial to obtain excellent fatigue properties. Especially, power density, spot size and coverage severely influence the residual stress profile of laser shock peened Ti-6Al-4V and Timetal LCB specimens. For both alloys, subsurface as well as surface compressive residual stress peaks can be obtained by varying the peening conditions. In general, Timetal LCB exhibits steeper stress gradients than Ti-6Al-4V for identical peening conditions. The main parameters affecting the fatigue life are near-surface cold work and compressive residual stresses.

Effects of Simulation Parameters on Residual Stresses of Inconel Alloy 600 in Finite Element Laser Shock Peening Analysis

2012 ◽  
Author(s):  
Ju Hee Kim ◽  
Ji Soo Kim ◽  
Yun Jae Kim ◽  
Hong Yeol Bae ◽  
Joung Soo Kim
Keyword(s):  
Finite Element ◽  
Residual Stresses ◽  
Pulse Duration ◽  
Laser Shock Peening ◽  
Maximum Pressure ◽  
Alloy 600 ◽  
Laser Shock ◽  
Inconel Alloy ◽  
Shock Peening ◽  
Compressive Residual Stresses

Laser shock peening (LSP) is an innovative surface treatment technique, which is successfully applied to improve fatigue performance of metallic components. After the treatment, the fatigue strength and fatigue life of a metallic material can be increased remarkably owing to the presence of compressive residual stresses in the material. Recently, the incidences of cracking in Alloy 600 small-caliber penetration nozzles (CRDM (control rod drive mechanism) and BMI (bottom mounted instrument)) have increased significantly. The cracking mechanism has been attributed to primary water stress corrosion cracking (PWSCC) and has been shown to be driven by welding residual stresses and operational stresses in the weld region. For this reason, to mitigating weld residual stress, preventive maintenance of BMI nozzles was considered application of laser shock peening process. The present study is to predict the residual stresses distribution along the peening surface and the interior of the target (Inconel alloy 600 steel) induced by single and multiple LSP processes using the finite element method. The simulations were accomplished using a commercial finite element package ABAQUS, employing both explicit and implicit methodologies. Effects of parameters related to finite element simulation of laser shock peening process to determine compressive residual stresses of Inconel alloy 600 steel are discussed, in particular parameters associated with the LSP process, such as the maximum pressure, pressure pulse duration, laser spot size and number of shots. It is found that about 2HEL maximum pressure and a certain range of the pulse duration can produce maximum compressive residual stresses near the surface, and thus proper choices of these parameters are important. But plastically affected depth increase with increasing maximum pressure and pulse duration. For the laser spot size, residual stresses are not affected, provided it is larger than a certain size. Magnitudes of the compressive residual stresses and plastically affected depth are found to increase with increasing number of shots, but the effect is less pronounced for more shots. Thus, the amplitude of the initial tensile residual stresses was remarkably changed by LSP. Additionally, In order to evaluate the influence of initial residual stresses in Inconel alloy 600 steel, the initial condition option was employed in the finite element code.

scholarly journals A parametric neutron Bragg edge imaging study of additively manufactured samples treated by laser shock peening

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Matteo Busi ◽  
Nikola Kalentics ◽  
Manuel Morgano ◽  
Seth Griffiths ◽  
Anton S. Tremsin ◽  
...  
Keyword(s):  
Residual Stress ◽  
Additive Manufacturing ◽  
Residual Stresses ◽  
Compressive Residual Stress ◽  
Laser Shock Peening ◽  
Powder Bed Fusion ◽  
Laser Shock ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Shock Peening

AbstractLaser powder bed fusion is an additive manufacturing technique extensively used for the production of metallic components. Despite this process has reached a status at which parts are produced with mechanical properties comparable to those from conventional production, it is still prone to introduce detrimental tensile residual stresses towards the surfaces along the building direction, implying negative consequences on fatigue life and resistance to crack formations. Laser shock peening (LSP) is a promising method adopted to compensate tensile residual stresses and to introduce beneficial compressive residual stress on the treated surfaces. Using neutron Bragg edge imaging, we perform a parametric study of LSP applied to 316L steel samples produced by laser powder bed fusion additive manufacturing. We include in the study the novel 3D-LSP technique, where samples are LSP treated also during the building process, at intermediate build layers. The LSP energy and spot overlap were set to either 1.0 or 1.5 J and 40$$\%$$ % or 80$$\%$$ % respectively. The results support the use of 3D-LSP treatment with the higher LSP laser energy and overlap applied, which showed a relative increase of surface compressive residual stress (CRS) and CRS depth by 54$$\%$$ % and 104$$\%$$ % respectively, compared to the conventional LSP treatment.

Application of the Eigenstrain Theory to Predict Residual Stress around Curved Edges after Laser Shock Peening

2013 ◽  
Vol 768-769 ◽  
pp. 185-192 ◽  
Author(s):  
Stefano Coratella ◽  
M. Burak Toparli ◽  
Michael E. Fitzpatrick
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Laser Shock Peening ◽  
Stress Profile ◽  
Laser Shock ◽  
Element Analysis ◽  
Residual Stress Profile ◽  
The Finite Element Analysis ◽  
Treatment Technologies ◽  
Shock Peening

Residual stresses play a fundamental role in mechanical engineering. They can be generated by manufacturing processes or introduced purposely by surface treatment technologies. One of the most recent technologies developed to introduce residual stresses is Laser Shock Peening. Since it is a relatively expensive technology, a fundamental role is played by the Finite Element Analysis approach to predict the final residual stress profile. The FEA approach consists of either direct simulation of the LSP process or the application of the eigenstrain approach. The application of the eigenstrain theory in predicting residual stresses after LSP treatment in curved edges is the subject of this research.

Finite Element Analysis of the Effect of Overlapping Impacts of Laser Shock Peening Within Annealed AISI 1053 Steel

2010 ◽  
Author(s):  
Rohit Voothaluru ◽  
C. Richard Liu
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Laser Shock Peening ◽  
Treatment Technique ◽  
Laser Shock ◽  
Fatigue Wear ◽  
Short Period ◽  
Shock Peening ◽  
Compressive Residual Stresses

Laser shock peening is a surface treatment technique similar to conventional shot peening. The laser induced plasma causes plastic deformations and compressive residual stresses in materials which are useful for developing improved properties in the fields of fatigue, wear or stress corrosion cracking. Finite element method is an efficient tool to predict the mechanical effects and the deformations caused due to laser shock peening, which otherwise are difficult to calculate due to the severe pressure imparted in a very short period of time. This paper presents the calculations performed using ABAQUS, for the simulation of multiple laser shock processing in order to evaluate the residual stress and the deformation of the material. A study of the effect of multiple laser shocks and their extent of overlap on the affected depths and the tensile and compressive residual stresses has been discussed. FEM calculations of residual stress fields and extent of surface deformation in annealed AISI 1053 steel has been investigated along with a study of the distribution of tensile and compressive residual stresses due to the difference in the extent of overlap of the multiple shocks.

Sign in / Sign up

Export Citation Format

Share Document