Time-Dependent Reliability Analysis Through Response Surface Method

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Dequan Zhang ◽  
Xu Han ◽  
Chao Jiang ◽  
Jie Liu ◽  
Qing Li
Keyword(s):  
Reliability Analysis ◽  
Response Surface ◽  
Structural Reliability ◽  
Time Dependent ◽  
Gaussian Stochastic Process ◽  
Reliability Indices ◽  
Novel Approach ◽  
Reliability Method ◽  
Optimal Linear ◽  
Uncertain Structures

In time-dependent reliability analysis, the first-passage method has been extensively used to evaluate structural reliability under time-variant service circumstances. To avoid computing the outcrossing rate in this method, surrogate modeling may provide an effective alternative for calculating the time-dependent reliability indices in structural analysis. A novel approach, namely time-dependent reliability analysis with response surface (TRARS), is thus introduced in this paper to estimate the time-dependent reliability for nondeterministic structures under stochastic loads. A Gaussian stochastic process is generated by using the expansion optimal linear estimation (EOLE) method which has proven to be more accurate and efficient than some series expansion discretization techniques. The random variables and maximum responses of uncertain structures are treated as the input and output parameters, respectively. Through introducing the response surface (RS) model, a novel iterative procedure is proposed in this study. A Bucher strategy is adopted to generate the initial sample points, and a gradient projection technique is used to generate new sampling points for updating the RS model in each iteration. The time-dependent reliability indices and probabilities of failure are thus obtained efficiently using the first-order reliability method (FORM) over a certain design lifetime. In this study, four demonstrative examples are provided for illustrating the accuracy and efficiency of the proposed method.

scholarly journals Time-Dependent Reliability Analysis of Reinforced Concrete Beams Subjected to Uniform and Pitting Corrosion and Brittle Fracture

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1820
Author(s):  
Mohamed El Amine Ben Seghier ◽  
Behrooz Keshtegar ◽  
Hussam Mahmoud
Keyword(s):  
Reinforced Concrete ◽  
Brittle Fracture ◽  
Reliability Analysis ◽  
Pitting Corrosion ◽  
Structural Reliability ◽  
Time Dependent ◽  
State Function ◽  
Rc Beams ◽  
Highly Nonlinear ◽  
Reliability Method

Reinforced concrete (RC) beams are basic elements used in the construction of various structures and infrastructural systems. When exposed to harsh environmental conditions, the integrity of RC beams could be compromised as a result of various deterioration mechanisms. One of the most common deterioration mechanisms is the formation of different types of corrosion in the steel reinforcements of the beams, which could impact the overall reliability of the beam. Existing classical reliability analysis methods have shown unstable results when used for the assessment of highly nonlinear problems, such as corroded RC beams. To that end, the main purpose of this paper is to explore the use of a structural reliability method for the multi-state assessment of corroded RC beams. To do so, an improved reliability method, namely the three-term conjugate map (TCM) based on the first order reliability method (FORM), is used. The application of the TCM method to identify the multi-state failure of RC beams is validated against various well-known structural reliability-based FORM formulations. The limit state function (LSF) for corroded RC beams is formulated in accordance with two corrosion types, namely uniform and pitting corrosion, and with consideration of brittle fracture due to the pit-to-crack transition probability. The time-dependent reliability analyses conducted in this study are also used to assess the influence of various parameters on the resulting failure probability of the corroded beams. The results show that the nominal bar diameter, corrosion initiation rate, and the external loads have an important influence on the safety of these structures. In addition, the proposed method is shown to outperform other reliability-based FORM formulations in predicting the level of reliability in RC beams.

Assessment of time-dependent reliability of reinforced concrete columns with uncertain load eccentricity

2000 ◽  
Vol 27 (3) ◽  
pp. 389-399
Author(s):  
H P Hong ◽  
W Zhou
Keyword(s):  
Reinforced Concrete ◽  
Reliability Analysis ◽  
Axial Load ◽  
Bending Moment ◽  
Time Dependent ◽  
Sensitivity Analyses ◽  
Live Load ◽  
Rc Columns ◽  
Reliability Indices ◽  
Reliability Method

An approach for the time-dependent reliability analysis of reinforced concrete (RC) columns considering the correlation between the axial load and the bending moment or the uncertainty in the load eccentricity is presented. The approach recursively uses the efficient first-order reliability method for the time-dependent reliability analysis. The proposed approach is more efficient than the ones used in the literature for the reliability analysis of RC columns. The proposed approach is used to carry out sensitivity analyses of the reliability of short RC columns to the time-dependent live load effects and to the correlation between the axial load and the bending moment. Results of the analyses suggest that the reliability of RC columns can be sensitive to the correlation between the axial load and the bending moment due to live load. The differences between the reliability indices obtained by considering the live load modeled as a pulse process and as an extreme variate can be large.Key words: reliability, load, time-dependent, time-independent, uncertainty, correlation, concrete, reinforcement, column.

scholarly journals DEVELOPED PROBABILISTIC REDUCTION FACTORS FOR LOPHIRA ALATA (EKKI) TIMBER JOISTS SUBJECTED TO CREEP-RUPTURE

2016 ◽  
Vol 36 (1) ◽  
pp. 39-44
Author(s):  
JM Kaura ◽  
A Lawan ◽  
AA Salihu
Keyword(s):  
Reliability Analysis ◽  
Structural Reliability ◽  
Significant Loss ◽  
Creep Rupture ◽  
Time Dependent ◽  
Load Duration ◽  
Design Variables ◽  
Reliability Method ◽  
Load Carrying ◽  
Strength And Stiffness

Wood experiences a significant loss of strength and stiffness when loaded over period of time. This phenomenon is known as creep-rupture. Several models were developed for the estimation of the reduction of load carrying capacity of timber with time. In this paper, the results of time dependent structural reliability analysis of timber joist produced with Lophiraalata (Ekki) timber specie was presented. Three load duration models were considered in the study, namely: The Model proposed by Wood, Gerhards model, and Nielsen. The timber joist was designed in accordance with the Eurocode 5. The uncertainties in all the basic design variables were fully accommodated in the time dependent reliability analysis. The entire process was implemented using a developed MATLAB program employing First Order Reliability Method (FORM). Time dependent mathematical models for modification of safety index to account for the effect of load duration were proposed. The use of both Gerhards and Nielsen model, for the design of Lophiraalata timber members was recommended.  http://dx.doi.org/10.4314/njt.v36i1.6

Reliability Analysis of Self-Anchored Suspension Bridge by Improved Response Surface Method

2011 ◽  
Vol 90-93 ◽  
pp. 869-873 ◽  
Author(s):  
Xiao Lin Yu ◽  
Quan Sheng Yan
Keyword(s):  
Reliability Analysis ◽  
Response Surface ◽  
Response Surface Method ◽  
Structural Reliability ◽  
Limit State ◽  
Suspension Bridge ◽  
Support Vector ◽  
Surface Method ◽  
Reliability Method ◽  
Improved Response Surface Method

The response surface method (RSM) developed in recent years is an effective way to solve the structural reliability problems with implicit performance function. In order to improve the computational efficiency and make RSM suitable well to large and complex engineering structures, the reliability analysis method based on uniform design method (UDM) and support vector machine (SVM) was proposed. UDM is adopted to select training data and SVM is used as response surface. Structural reliability index is calculated in combination with the traditional reliability analysis methods (such as, the first-order reliability method (FORM), the second-order reliability method (SORM) or Monte Carlo simulation method (MCSM)). Numerical examples show that sampled with the UDM can greatly reduce the number of samples required for training by SVM model, and a very good approximation of the limit state surface can be obtained to get the failure probability. The reliability analysis of the under serviceability limit-state of a typical self-anchored suspension bridge——Sanchaji Bridge was carried out with the improved response surface method.

A New Response Surface Method for Structural Reliability Analysis

2013 ◽  
Vol 712-715 ◽  
pp. 1506-1509 ◽  
Author(s):  
Guang Bo Li ◽  
Guang Wei Meng ◽  
Feng Li ◽  
Li Ming Zhou
Keyword(s):  
Reliability Analysis ◽  
Response Surface ◽  
Response Surface Method ◽  
Failure Probability ◽  
Structural Reliability ◽  
Uniform Design ◽  
State Function ◽  
Structural Reliability Analysis ◽  
Surface Method ◽  
Reliability Method

The response surface method is adopted to analyze the structural reliability. This paper presents a new response surface method with the uniform design method to predict the failure probability of structures. It is the response surface method based on Fourier orthogonal basis function (RSM-Fourier). To reduce computational costs in structural reliability analysis, approximate Fourier response surface functions for reliability assessment have been suggested. The method involves the selection of training datasets for establishing a model by the uniform design points, the approximation of the limit state function by the trained model and the estimation of the failure probability using first-order reliability method (FORM). The proposed method is applied to examples, compared with other methods to demonstrate its effectiveness.

scholarly journals Time-Dependent Reliability Analysis of Plate-Stiffened Prismatic Pressure Vessel with Corrosion

Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1544
Author(s):  
Younseok Choi ◽  
Junkeon Ahn ◽  
Daejun Chang
Keyword(s):  
Reliability Analysis ◽  
Pitting Corrosion ◽  
Pressure Vessel ◽  
Reliability Index ◽  
Structural Reliability ◽  
Pressure Vessels ◽  
Outer Shell ◽  
Time Dependent ◽  
General Corrosion ◽  
Reliability Method

In this study, the structural reliability of plate-stiffened prismatic pressure vessels was analyzed over time. A reliability analysis was performed using a time-dependent structural reliability method based on the response surface method (RSM). The plate-stiffened prismatic pressure vessel had a rectangular cross-section with repeated internal load-bearing structures. For the structural analysis, this repeated structure was modeled as a strip, and a structural reliability analysis was performed to identify changes in the reliability index when general corrosion and pitting corrosion occurred in the outer shell. Pitting corrosion was assumed to be randomly distributed on the outer shell, and the reliability index according to the degree of pit (DOP) and time was analyzed. Analysis results confirmed that the change in the reliability index was larger when pitting corrosion was applied compared with when only general corrosion was applied. Additionally, it was confirmed that above a certain DOP, the reliability index was affected.

Structural Reliability Analysis Using Quadratic Polynomial Response Surface and Finite Element in MATLAB

2016 ◽  
Author(s):  
M. M. A. Wahab ◽  
V. J. Kurian ◽  
M. S. Liew ◽  
Z. Nizamani ◽  
D. K. Kim
Keyword(s):  
Finite Element ◽  
Reliability Analysis ◽  
Response Surface ◽  
Structural Reliability ◽  
Limit State ◽  
Quadratic Polynomial ◽  
System Level ◽  
Approximation Technique ◽  
Reliability Indices ◽  
Polynomial Response Surface

Many aging jacket platforms are being pushed for continued use beyond their design life due to advancement in oil extracting technology and economic reasons. Thus reassessment to determine the platform safety is vital. But no exact guide on methods to assess the safety of the aging platforms is available. Hence, development of reliability analysis methodologies is an active research area. Meanwhile, reassessment deals with numerous uncertainties especially in the load and resistance variables of a jacket platform. Response Surface methodology, a limit state approximation technique was deployed by many in many engineering fields to apprehend inherent uncertainty. Hence in this work, a reliability analysis methodology that combines simple response surface and finite element approach in MATLAB is adopted. The approach assumes a physical transfer function utilizing explicit multivariate expressions and random variables. Also, this avoids large number of finite element simulation required for any probabilistic analysis. The methodology developed allows for reliability analysis to be performed based on easy to program procedures. It also addresses the platform and environmental specific uncertainty variables to distinguish the distinctive characteristics of the cases. Upon execution of multiple finite element simulations, response of components and systems are formulated using quadratic polynomial response surface expressions, which eventually are utilized in the limit state functions. Later using numerical techniques in a separate computational routine the reliability indices are estimated. Utilizing the developed method, component and system level reliability indices are obtained. The developed methodology also has been verified with method currently available in the practice as well as with typical simulation method i.e. Monte Carlo Simulation.

Response surface method strategies coupled with NLFEA for structural reliability analysis of prestressed bridges

2021 ◽  
Author(s):  
Silvia J. Sarmiento Nova ◽  
Jaime Gonzalez-Libreros ◽  
Gabriel Sas ◽  
Rafael A. Sanabria Díaz ◽  
Maria C. A. Texeira da Silva ◽  
...  
Keyword(s):  
Reliability Analysis ◽  
Response Surface ◽  
Response Surface Method ◽  
Structural Reliability ◽  
Limit State ◽  
Material Behavior ◽  
Nonlinear Material ◽  
State Function ◽  
Surface Method ◽  
Highly Nonlinear

<p>The Response Surface Method (RSM) has become an essential tool to solve structural reliability problems due to its accuracy, efficacy, and facility for coupling with Nonlinear Finite Element Analysis (NLFEA). In this paper, some strategies to improve the RSM efficacy without compromising its accuracy are tested. Initially, each strategy is implemented to assess the safety level of a highly nonlinear explicit limit state function. The strategy with the best results is then identified and used to carry out a reliability analysis of a prestressed concrete bridge, considering the nonlinear material behavior through NLFEA simulation. The calculated value of &#120573; is compared with the target value established in Eurocode for ULS. The results showed how RSM can be a practical methodology and how the improvements presented can reduce the computational cost of a traditional RSM giving a good alternative to simulation methods such as Monte Carlo.</p>

scholarly journals Dynamic Reliability Analysis of Corroded Pipeline Using Bayesian Network

2018 ◽  
Vol 7 (4.35) ◽  
pp. 210
Author(s):  
Nurul Sa’aadah Sulaiman ◽  
Henry Tan
Keyword(s):  
Bayesian Network ◽  
Reliability Analysis ◽  
Structural Reliability ◽  
Dynamic Bayesian Network ◽  
Operating Pressure ◽  
Dynamic Reliability ◽  
Time Dynamic ◽  
Remaining Service Life ◽  
Reliability Method ◽  
Deterioration Process

Maintenance and integrity management of hydrocarbons pipelines face the challenges from uncertainties in the data available. This paper demonstrates a way for pipeline remaining service life prediction that integrates structural reliability analysis, accumulated corrosion knowledge, and inspection data on a sound mathematical foundation. Pipeline defects depth grows with time according to an empirical corrosion power law, and this is checked for leakage and rupture probability. The pipeline operating pressure is checked with the degraded failure pressure given by ASME B31G code for rupture likelihood. As corrosion process evolves with time, Dynamic Bayesian Network (DBN) is employed to model the stochastic corrosion deterioration process. From the results obtained, the proposed DBN model for pipeline reliability is advanced compared with other traditional structural reliability method whereby the updating ability brings in more accurate prediction results of structural reliability. The comparisons show that the DBN model can achieve a realistic result similar to the conventional method, Monte Carlo Simulation with very minor discrepancy.

Sign in / Sign up

Export Citation Format

Share Document