Detached-Eddy Simulation of Ground Effect on the Wake of a High-Speed Train

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
Chao Xia ◽  
Xizhuang Shan ◽  
Zhigang Yang
Keyword(s):  
Vortex Shedding ◽  
High Speed ◽  
Vortex Pair ◽  
Ground Effect ◽  
Longitudinal Vortex ◽  
High Speed Train ◽  
Detached Eddy Simulation ◽  
Side Force ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation

The influence of ground effect on the wake of a high-speed train (HST) is investigated by an improved delayed detached-eddy simulation. Aerodynamic forces, the time-averaged and instantaneous flow structure of the wake are explored for both the stationary ground and the moving ground. It shows that the lift force of the trailing car is overestimated, and the fluctuation of the lift and side force is much greater under the stationary ground, especially for the side force. The coexistence of multiscale vortex structures can be observed in the wake along with vortex stretching and pairing. Furthermore, the out-of-phase vortex shedding and oscillation of the longitudinal vortex pair in the wake are identified for both ground configurations. However, the dominant Strouhal number of the vortex shedding for the stationary and moving ground is 0.196 and 0.111, respectively, due to the different vorticity accumulation beneath the train. A conceptual model is proposed to interpret the mechanism of the interaction between the longitudinal vortex pair and the ground. Under the stationary ground, the vortex pair embedded in a turbulent boundary layer causes more rapid diffusion of the vorticity, leading to more intensive oscillation of the longitudinal vortex pair.

An improved delayed detached eddy simulation study of the bogie cavity length effects on the aerodynamic performance of a high-speed train

2020 ◽  
Vol 234 (12) ◽  
pp. 2386-2401 ◽  
Author(s):  
Jiabin Wang ◽  
Guglielmo Minelli ◽  
Yan Zhang ◽  
Jie Zhang ◽  
Sinisa Krajnović ◽  
...  
Keyword(s):  
High Speed ◽  
Cavity Length ◽  
Longitudinal Vortex ◽  
Resistance Force ◽  
Wake Region ◽  
High Speed Train ◽  
Detached Eddy Simulation ◽  
Near Wake ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation

This paper uses an improved delayed detached eddy simulation method to investigate the unsteady flow features of the high-speed trains with various cavity lengths at Re = 1.85×106. The improved delayed detached eddy simulation results are validated against the experimental data obtained during previous wind tunnel tests. The effects of cavity length on the resistance force, flow structures beneath the high-speed train and in the wake are analyzed. The results show that a longer cavity significantly increases the streamwise velocity level near the rear plates and forms a stronger impinging flow on the rear plates, and thus contributes to a higher value of resistance. Furthermore, a longer cavity decreases the pressure coefficients around the near wake region from the top of the ballast to the tail nose in the vertical direction and thereby increases the pressure drag of the high-speed train. Additionally, a longer bogie cavity is found to increase the longitudinal vortex scales in the near wake region. All these changes on the flow field bring to 5.8% and 11.5% drag increase when the bogie cavities are elongated by 20% and 40%, respectively, of the wheelbase.

scholarly journals Numerical Investigation on the Influence of the Streamlined Structures of the High-Speed Train’s Nose on Aerodynamic Performances

2021 ◽  
Vol 11 (2) ◽  
pp. 784
Author(s):  
Zhenxu Sun ◽  
Shuanbao Yao ◽  
Lianyi Wei ◽  
Yongfang Yao ◽  
Guowei Yang
Keyword(s):  
Drag Reduction ◽  
Pressure Distribution ◽  
Flow Separation ◽  
High Speed ◽  
Leeward Side ◽  
Detached Eddy Simulation ◽  
Side Force ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Asymmetrical Design

The structural design of the streamlined shape is the basis for high-speed train aerodynamic design. With use of the delayed detached-eddy simulation (DDES) method, the influence of four different structural types of the streamlined shape on aerodynamic performance and flow mechanism was investigated. These four designs were chosen elaborately, including a double-arch ellipsoid shape, a single-arch ellipsoid shape, a spindle shape with a front cowcatcher and a double-arch wide-flat shape. Two different running scenes, trains running in the open air or in crosswind conditions, were considered. Results reveal that when dealing with drag reduction of the whole train running in the open air, it needs to take into account how air resistance is distributed on both noses and then deal with them both rather than adjust only the head or the tail. An asymmetrical design is feasible with the head being a single-arch ellipsoid and the tail being a spindle with a front cowcatcher to achieve the minimum drag reduction. The single-arch ellipsoid design on both noses could aid in moderating the transverse amplitude of the side force on the tail resulting from the asymmetrical vortex structures in the flow field behind the tail. When crosswind is considered, the pressure distribution on the train surface becomes more disturbed, resulting in the increase of the side force and lift. The current study reveals that the double-arch wide-flat streamlined design helps to alleviate the side force and lift on both noses. The magnitude of side force on the head is 10 times as large as that on the tail while the lift on the head is slightly above that on the tail. Change of positions where flow separation takes place on the streamlined part is the main cause that leads to the opposite behaviors of pressure distribution on the head and on the tail. Under the influence of the ambient wind, flow separation occurs about distinct positions on the train surface and intricate vortices are generated at the leeward side, which add to the aerodynamic loads on the train in crosswind conditions. These results could help gain insight on choosing a most suitable streamlined shape under specific running conditions and acquiring a universal optimum nose shape as well.

Relations between shear flow and vortices in the near wake of a high speed train

2021 ◽  
pp. 095440972110317
Author(s):  
Yong-chen Pan ◽  
Jian-wei Yao ◽  
Rui Xu ◽  
Tao Liu ◽  
Jun Zheng ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Shear Flow ◽  
High Speed ◽  
Boundary Layer Separation ◽  
High Speed Train ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Dominant Component ◽  
Delayed Detached Eddy Simulation ◽  
Omega Method

Two flow cases for high speed train models with different lengths have been numerically computed by performing the improved delayed detached-eddy simulation. Based on the Omega method and turbulence production (TP) distribution, the relations between the shear flow and vortices in the near turbulent wake of a high speed train have been comparatively analyzed. First, in the wake region immediately close to the tail, the boundary layer separation plays significant roles. And the mechanism makes shear deformation prominent in the region with the formed vortices. Moreover, the shear layers are pertinent to the boundary-layer thicknesses and help to the TP distribution. However, the shear-dominated region is very limited due to high dissipation. One the other hand, a vast majority of the vortices captured with the parameter Omega increasing in the downstream region away from the tail. And the TP distributions are stable at different streamwise positions, though obviously decreased. They are greatly attributed to the mean strain rate in the horizontal plane. Meanwhile, the vortical vorticity is thought to be the dominant component inside the vortex cores, although the shear becomes weaker. And thus the turbulence itself can be spatially sustained due to the relatively stable vortex structure. Moreover, the weak shear is believed to depend upon the interaction between the vortices and the ground.

A numerical study of snow accumulation on the bogies of high-speed trains based on coupling improved delayed detached eddy simulation and discrete phase model

2018 ◽  
Vol 233 (7) ◽  
pp. 715-730 ◽  
Author(s):  
Mingyang Liu ◽  
Jiabin Wang ◽  
Huifen Zhu ◽  
Sinisa Krajnovic ◽  
Guangjun Gao
Keyword(s):  
High Speed ◽  
Numerical Study ◽  
Snow Accumulation ◽  
Phase Model ◽  
Detached Eddy Simulation ◽  
Discrete Phase Model ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Flow Mechanisms ◽  
Discrete Phase

A numerical simulation method based on the improved delayed detached eddy simulation coupled with a discrete phase model is used to study the influence of the snow on the performance of bogies of a high-speed train running in snowy weather. The snow particle trajectories, mass of snow packing on the bogie, and thickness of snow accumulation have been analyzed to investigate the flow mechanisms of snow accumulation on different parts of the bogies. The results show that the snow accumulation on the first bogie of the head vehicle is almost the same as that of the second bogie, but the total accumulated snow on the top side of the second bogie is more than 74% higher than that of the first bogie. Among all the components of the bogies, the motors were found to be strongly influenced by the snow accumulation. The underlying flow mechanisms responsible for the snow accumulations are discussed.

Simulation of Dynamic Stall on an Elastic Rotor in High-Speed Turn Flight

2020 ◽  
Vol 65 (2) ◽  
pp. 1-12
Author(s):  
Johannes Letzgus ◽  
Manuel Keßler ◽  
Ewald Krämer
Keyword(s):  
High Speed ◽  
Separated Flow ◽  
Flight Test ◽  
Dynamic Stall ◽  
Minor Role ◽  
Detached Eddy Simulation ◽  
Rotor Aerodynamics ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
A Minor

A highly loaded, high-speed turn flight of Airbus Helicopters' Bluecopter demonstrator helicopter is simulated to investigate dynamic stall using a loose computational fluid dynamics/structural dynamics (CFD/CSD) coupling of the flow solver FLOWer and the rotorcraft comprehensive code CAMRAD II. The rotor aerodynamics is computed using a high-fidelity delayed detached-eddy simulation (DDES). A three-degree-of-freedom trim of an isolated rotor is performed, yielding main-rotor control angles that agree well with the flight-test measurements. The flow field in this flight condition is found to be highly unsteady and complex, featuring massively separated flow, blade–vortex interaction, multiple dynamic-stall events, and shock-induced separation. The computed pitch-link loads are compared to flight-test measurements. This shows that all CFD/CSD cases underpredict the amplitudes of the flight test and yield phase shifts. However, overall trends agree reasonably. Also, varying the computational setup reveals that the shear stress transport–DDES turbulence model performs better than Spalart–Allmaras–DDES, that the consideration of the rotor hub and fuselage improves the agreement with flight-test data, and that the elastic twist plays only a minor role in the dynamic-stall events.

Improved Delayed Detached Eddy Simulation (IDDES) of a 1.5 Stage Axial Compressor Non-Synchronous Vibration

2020 ◽  
Author(s):  
Purvic Patel ◽  
Yunchao Yang ◽  
Gecheng Zha
Keyword(s):  
Rotor Blade ◽  
High Speed ◽  
Stokes Equations ◽  
Axial Compressor ◽  
Suction Side ◽  
Tip Vortex ◽  
Weno Scheme ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation

Abstract This paper utilizes the Improved Delayed Detached Eddy Simulation (IDDES) to investigate the non-synchronous vibration (NSV) mechanism of a 1.5 stage high-speed axial compressor. The NSV occurs at a part speed in the rig test. A low diffusion E-CUSP approximate Riemann solver with a third order Weighted Essentially Non-Oscillating (WENO) scheme for the inviscid flux and a second order central differencing scheme for the viscous flux are employed to solve the 3D time accurate Navier-Stokes equations. The fully conservative sliding boundary condition is used to preserve the wake-propagation. The aerodynamic instability in the tip region induces two alternating low pressure regions near the leading and the trailing edge on the suction side of the rotor blade. It is observed that the circumferential tip vortex motion in the rotor passage above 75 % span and its coupling forces cause NSV at the operating speed. This instability moves in the counter-rotating direction in the rotational frame. The NSV results using URANS simulation is also presented for comparison. The predicted frequency with the IDDES and URANS using rigid blades agrees well with the measured frequency in the rig test. In addition to the NSV, the IDDES solver also captures the dominant engine order frequencies. The tip flow structures show the vortex filament with one end on the suction side of the rotor blade and other side terminating on the casing or the pressure side of the rotor blade.

Anti-snow performance of snow shields designed for brake calipers of a high-speed train

2018 ◽  
Vol 233 (2) ◽  
pp. 121-140 ◽  
Author(s):  
Jiabin Wang ◽  
Guangjun Gao ◽  
Yan Zhang ◽  
Kan He ◽  
Jie Zhang
Keyword(s):  
High Speed ◽  
Snow Accumulation ◽  
Cold Weather ◽  
High Speed Train ◽  
Detached Eddy Simulation ◽  
Discrete Phase Model ◽  
Railway Line ◽  
Eddy Simulation ◽  
Flow Features ◽  
Discrete Phase

When high-speed trains run on a snowy railway line in cold weather, a large amount of snow and ice will accumulate on the brake calipers, which can lead to huge safety problems. In this paper, to solve this issue, a numerical method based on the detached eddy simulation was used to explore the flow features of a high-speed train running in cold weather. The accuracy of mesh resolution and methodology of Computational Fluid Dynamics (CFD) was validated against the wind tunnel tests. A discrete phase model was used to investigate the process of snow accumulation on the brake calipers by analysing the movement characteristics of snow particles. Based on this analysis, three kinds of anti-snow packing shields for the brake calipers were designed, and the shielding effects were compared via numerical simulations. The results show that a large amount of snow particles below the bogie directly impact the brake calipers causing massive snow packing on the bottom surfaces; some snow particles reflected from the rear equipment cabin cover return to the bogie region and accumulates on the upper surfaces. With the application of anti-snow packing shields with trapezoidal-, triangular- and cambered-shaped openings, the rates of snow accumulation on the brake calipers were reduced by 18.53, 26.68 and 38.81%, respectively. The cambered type provides the best anti-snow packing performance for the brake calipers.

scholarly journals Adaptability of Turbulence Models for Pantograph Aerodynamic Noise Simulation

2019 ◽  
Vol 2019 ◽  
pp. 1-20 ◽  
Author(s):  
Xiao-ming Tan ◽  
Peng-peng Xie ◽  
Zhi-gang Yang ◽  
Jian-yong Gao
Keyword(s):  
Shear Stress ◽  
Wind Tunnel ◽  
High Speed ◽  
Aerodynamic Noise ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Shear Stress Transport ◽  
Delayed Detached Eddy Simulation ◽  
Relative Errors ◽  
Les Model

This study was targeted at CX-PG-type Faiveley pantograph of high-speed train and cylinders and analysed the fluctuating flow field around these objects by using the large eddy simulation (LES) model, the scale adaptive simulation (SAS) model, the improved delayed detached eddy simulation with shear-stress transport-kω (IDDES sst-kω) model, the delayed detached eddy simulation with shear-stress transport-kω (DDES sst-kω) model, and the delayed detached eddy simulation with realizable-kε (DDES R-kε) model. The space distributions of velocity, vorticity, and vortex structures were compared to investigate their performances on simulating fluctuating flow fields and computing aeroacoustic sources through Fourier transformation based on the surface fluctuating pressures. Furthermore, the far-field radiated noise was calculated based on the Ffowcs Williams–Hawkings equation. Based on the computation precision of the five models, a feasible turbulent model was selected for simulating aerodynamic noise. The relative errors to the results from wind-tunnel experiments of the sound pressure level (SPL) were obtained as 0.7%, 1.6%, 7.8%, 3.8%, and 12.1%, respectively, and the peak Strouhal numbers were obtained as 2.0%, 8.5%, 5.5%, 11.5%, and 51.0% for cylinder simulation. Moreover, the relative errors of SAS, IDDES sst-kω, DDES sst-kω, and DDES R-kε models to the result from LES of SPL were respectively obtained as 2.3%, 4.5%, 5.6%, and 10.8% for pantograph. Thus, it is conclusive that none of the aforementioned models are comparable with the LES model with respect to the precision in the aeroacoustic simulation. However, SAS, IDDES sst-kω, and DDES sst-kω are practically competent with the LES model considering the numerical simulations with respect to the engineering computation precision. The numerical computation model was verified using the wind-tunnel test results.

Numerical simulation of the effects of obstacle deflectors on the aerodynamic performance of stationary high-speed trains at two yaw angles

2017 ◽  
Vol 232 (3) ◽  
pp. 913-927 ◽  
Author(s):  
Ji-qiang Niu ◽  
Dan Zhou ◽  
Xi-feng Liang
Keyword(s):  
High Speed ◽  
Simulation Method ◽  
Aerodynamic Performance ◽  
Wake Flow ◽  
Detached Eddy Simulation ◽  
Aerodynamic Forces ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
High Speed Trains ◽  
Yaw Angle

In this study, based on the shear-stress transport κ–ω turbulent model, the improved delayed detached eddy simulation method has been used to simulate the unsteady aerodynamic performance of trains with different obstacle deflectors at two yaw angles (0° and 15°). The numerical algorithm is used and some of the numerical results are verified through wind tunnel tests. By comparing and analysing the obtained results, the effects of the obstacle deflectors on the force of the trains as well as the pressure and flow structure around the trains are elucidated. The results show that the obstacle deflectors primarily affect the flow field at the bottom of the head car as well as the wake flow, and that the internal oblique-type obstacle deflector (IOOD) markedly improves the aerodynamic performance of the trains, by decreasing most of the aerodynamic forces of the train cars and minimising their fluctuations. Further, a nonzero yaw angle weakens or even changes the effect of the IOOD on the aerodynamic forces of the train cars. However, the effect of the IOOD is more on the tail car.

Sign in / Sign up

Export Citation Format

Share Document