scholarly journals Investigation of Unsteady Flow Phenomena in First Vane Caused by Combustor Flow With Swirl

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Simon Jacobi ◽  
Cosimo Mazzoni ◽  
Budimir Rosic ◽  
Krishan Chana
Keyword(s):  
Gas Turbines ◽  
High Speed ◽  
Leading Edge ◽  
Transient Behavior ◽  
Horseshoe Vortex ◽  
Spanwise Direction ◽  
Flow Solver ◽  
Eddy Simulation ◽  
Flow Phenomena ◽  
Nozzle Guide

The flow at the combustor turbine interface of power generation gas turbines with can combustors is characterized by high and nonuniform turbulence levels, lengthscales, and residual swirl. These complexities have a significant impact on the first vanes aerothermal performance and lead to challenges for an effective turbine design. To date, this design philosophy mostly assumed steady flow and thus largely disregards the intrinsic unsteadiness. This paper investigates the steady and unsteady effects of the combustor flow with swirl on the turbines first vanes. Experimental measurements are conducted on a high-speed linear cascade that comprises two can combustors and four nozzle guide vanes (NGVs). The experimental results are supported by a large eddy simulation (LES) performed with the inhouse computational fluid dynamics (CFD) flow solver TBLOCK. The study reveals the highly unsteady nature of the flow in the first vane and its effect on the heat transfer. A persistent flow structure of concentrated vorticity is observed. It wraps around the unshielded vane's leading edge (LE) at midspan and periodically oscillates in spanwise direction due to the interaction of the residual low-pressure swirl core and the vane's potential field. Moreover, the transient behavior of the horseshoe-vortex system due to large fluctuations in incidence is demonstrated.

scholarly journals Investigation of Unsteady Flow Phenomena in First Vane Caused by Combustor Flow With Swirl

2016 ◽  
Author(s):  
Simon Jacobi ◽  
Cosimo Mazzoni ◽  
Krishan Chana ◽  
Budimir Rosic
Keyword(s):  
Gas Turbines ◽  
High Speed ◽  
Leading Edge ◽  
Transient Behavior ◽  
Horseshoe Vortex ◽  
Spanwise Direction ◽  
Flow Solver ◽  
Eddy Simulation ◽  
Flow Phenomena ◽  
Nozzle Guide

The flow at the combustor turbine interface of power generation gas turbines with can combustors is characterized by high and non-uniform turbulence levels, lengthscales and residual swirl. These complexities have a significant impact on the first vanes aerothermal performance and lead to challenges for an effective turbine design. To date, this design philosophy mostly assumed steady flow and thus largely disregards the intrinsic unsteadiness. This paper investigates the steady and unsteady effects of the combustor flow with swirl on the turbines first vanes. Experimental measurements are conducted on a high-speed linear cascade that comprises two can combustors and four nozzle guide vanes. The experimental results are supported by a Large Eddy Simulation performed with the inhouse CFD flow solver TBLOCK. The study reveals the highly unsteady nature of the flow in the first vane and its effect on the heat transfer. A persistent flow structure of concentrated vorticity is observed. It wraps around the unshielded vane’s leading edge at midspan and periodically oscillates in spanwise direction due to the interaction of the residual low-pressure swirl core and the vane’s potential field. Moreover, the transient behavior of the horseshoe-vortex system due to large fluctuations in incidence is demonstrated.

scholarly journals Development and Aerothermal Investigation of Integrated Combustor Vane Concept

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Simon Jacobi ◽  
Budimir Rosic
Keyword(s):  
Heat Transfer ◽  
Film Cooling ◽  
Gas Turbines ◽  
High Speed ◽  
Leading Edge ◽  
Cfd Simulations ◽  
Pressure Loss Coefficient ◽  
Novel Concept ◽  
Nozzle Guide ◽  
Stage Efficiency

This paper presents the development and aerothermal investigation of the integrated combustor vane concept for power generation gas turbines with individual can combustors. In this novel concept, first introduced in 2010, the conventional nozzle guide vanes (NGVs) are removed and flow turning is achieved by vanes that extend the combustor walls. The concept was developed using the in-house computational fluid dyanamics (CFD) code TBLOCK. Aerothermal experiments were conducted using a modular high-speed linear cascade, designed to model the flow at the combustor–vane interface. The facility is comprised of two can combustor transition ducts and either four conventional vanes (CVs) or two integrated vanes (IVs). The experimental study validates the linear CFD simulations of the IV development. Annular full-stage CFD simulations, used to evaluate aerodynamics, heat transfer, and stage efficiency, confirm the trends of the linear numerical and experimental results, and thus demonstrate the concept's potential for real gas turbine applications. Results show a reduction of the total pressure loss coefficient at the exit of the stator vanes by more than 25% due to a reduction in profile and endwall loss. Combined with an improved rotor performance demonstrated by unsteady stage simulations, these aerodynamic benefits result in a gain in stage efficiency of above 1%. A distinct reduction in heat transfer coefficient (HTC) levels on vane surfaces, on the order of 25–50%, and endwalls is observed and attributed to an altered state of boundary layer (BL) thickness. The development of IV's endwall- and leading edge (LE)-cooling geometry shows a superior surface coverage of cooling effectiveness, and the cooling requirements for the first vane are expected to be halved. Moreover, by halving the number of vanes, simplifying the design and eliminating the need for vane LE film cooling, manufacturing and development costs can be significantly reduced.

Effect of the Combustor Wall on the Aerothermal Field of a Nozzle Guide Vane

2018 ◽  
Vol 140 (5) ◽  
Author(s):  
Ioanna Aslanidou ◽  
Budimir Rosic
Keyword(s):  
Gas Turbines ◽  
High Speed ◽  
Guide Vane ◽  
Leading Edge ◽  
Flow Structures ◽  
Experimental Facility ◽  
Aerodynamic Loss ◽  
Nozzle Guide Vane ◽  
Nozzle Guide ◽  
Processing Techniques

In gas turbines with can combustors, the trailing edge (TE) of the combustor transition duct wall is found upstream of every second vane. This paper presents an experimental and numerical investigation of the effect of the combustor wall TE on the aerothermal performance of the nozzle guide vane. In the measurements carried out in a high-speed experimental facility, the wake of this wall is shown to increase the aerodynamic loss of the vane. On the other hand, the wall alters secondary flow structures and has a protective effect on the heat transfer in the leading edge-endwall junction, a critical region for component life. The different clocking positions of the vane relative to the combustor wall are tested experimentally and are shown to alter the aerothermal field. The experimental methods and processing techniques adopted in this work are used to highlight the differences between the different cases studied.

scholarly journals Aerothermal Investigations of Mixing Flow Phenomena in Case of Radially Inclined Ejection Holes at the Leading Edge

1999 ◽  
Author(s):  
Dieter E. Bohn ◽  
Karsten A. Kusterer
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Gas Turbines ◽  
Leading Edge ◽  
Suction Side ◽  
Pressure Side ◽  
Blade Surface ◽  
Cooling Fluid ◽  
Flow Phenomena ◽  
Vortex Systems

A leading edge cooling configuration is investigated numerically by application of a 3-D conjugate fluid flow and heat transfer solver, CHT-Flow. The code has been developed at the Institute of Steam and Gas Turbines, Aachen University of Technology. It works on the basis of an implicit finite volume method combined with a multi-block technique. The cooling configuration is an axial turbine blade cascade with leading edge ejection through two rows of cooling holes. The rows are located in the vicinity of the stagnation line, one row is on the suction side, the other row is on the pressure side. The cooling holes have a radial ejection angle of 45°. This configuration has been investigated experimentally by other authors and the results have been documented as a test case for numerical calculations of ejection flow phenomena. The numerical domain includes the internal cooling fluid supply, the radially inclined holes and the complete external flow field of the turbine vane in a high resolution grid. Periodic boundary conditions have been used in the radial direction. Thus, end wall effects have been excluded. The numerical investigations focus on the aerothermal mixing process in the cooling jets and the impact on the temperature distribution on the blade surface. The radial ejection angles lead to a fully three dimensional and asymmetric jet flow field. Within a secondary flow analysis it can be shown that complex vortex systems are formed in the ejection holes and in the cooling fluid jets. The secondary flow fields include asymmetric kidney vortex systems with one dominating vortex on the back side of the jets. The numerical and experimental data show a good agreement concerning the vortex development. The phenomena on the suction side and the pressure side are principally the same. It can be found that the jets are barely touching the blade surface as the dominating vortex transports hot gas under the jets. Thus, the cooling efficiency is reduced.

scholarly journals Flow Inhomogeneities in a Realistic Aeronautical Gas-Turbine Combustor: Formation, Evolution and Indirect Noise

2018 ◽  
Author(s):  
Andrea Giusti ◽  
Luca Magri ◽  
Marco Zedda
Keyword(s):  
Gas Turbines ◽  
Transfer Functions ◽  
Guide Vane ◽  
Flame Structure ◽  
Combustion Noise ◽  
Moment Closure ◽  
Combustion Model ◽  
Conditional Moment ◽  
Eddy Simulation ◽  
Nozzle Guide

Indirect noise generated by the acceleration of combustion inhomogeneities is an important aspect in the design of aeroengines because of its impact on the overall noise emitted by an aircraft and the possible contribution to combustion instabilities. In this study, a realistic rich-quench-lean combustor is numerically investigated, with the objective of quantitatively analyzing the formation and evolution of flow inhomogeneities and determine the level of indirect combustion noise in the nozzle guide vane (NGV). Both entropy and compositional noise are calculated in this work. A high-fidelity numerical simulation of the combustion chamber, based on the Large-Eddy Simulation (LES) approach with the Conditional Moment Closure (CMC) combustion model, is performed. The contributions of the different air streams to the formation of flow inhomogeneities are pinned down and separated with seven dedicated passive scalars. LES-CMC results are then used to determine the acoustic sources to feed an NGV aeroacoustic model, which outputs the noise generated by entropy and compositional inhomogeneities. Results show that non-negligible fluctuations of temperature and composition reach the combustor’s exit. Combustion inhomogeneities originate both from finite-rate chemistry effects and incomplete mixing. In particular, the role of mixing with dilution and liner air flows on the level of combustion inhomogeneities at the combustor’s exit is highlighted. The species that most contribute to indirect noise are identified and the transfer functions of a realistic NGV are computed. The noise level indicates that indirect noise generated by temperature fluctuations is larger that the indirect noise generated by compositional inhomogeneities, although the latter is not negligible and is expected to become louder in supersonic nozzles. It is also shown that relatively small fluctuations of the local flame structure can lead to significant variations of the nozzle transfer function, whose gain increases with the Mach number. This highlights the necessity of an on-line solution of the local flame structure, which is performed in this paper by CMC, for an accurate prediction of the level of compositional noise. This study opens new possibilities for the identification, separation and calculation of the sources of indirect combustion noise in realistic aeronautical gas turbines.

Large Eddy Simulation on the Interactions of Wake and Film-Cooling Near a Leading Edge

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
S. Sarkar ◽  
Harish Babu
Keyword(s):  
Large Eddy Simulation ◽  
Film Cooling ◽  
Vortex Pair ◽  
Leading Edge ◽  
Horseshoe Vortex ◽  
Constant Thickness ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Flow Past A Cylinder ◽  
Downward Spiral

The unsteady flow physics due to interactions between a separated shear layer and film cooling jet apart from excitation of periodic passing wake are studied using large eddy simulation (LES). An aerofoil of constant thickness with rounded leading edge induced flow separation, while film cooling jets were injected normal to the crossflow a short distance downstream of the blend point. Wake data extracted from precursor LES of flow past a cylinder are used to replicate a moving bar that generates wakes in front of a cascade (in this case, an infinite row of the model aerofoils). This setup is a simplified representation of rotor-stator interaction in a film cooled gas turbine. The results of numerical simulation are presented to elucidate the formation, convection and breakdown of flow structures associated with the highly anisotropic flow involved in film cooling perturbed by convective wakes. The various vortical structures namely, horseshoe vortex, roller vortex, upright wake vortex, counter rotating vortex pair (CRVP), and downward spiral separation node (DSSN) vortex associated with film cooling are resolved. The effects of wake on the evolution of these structures are then discussed.

Visualizations of Flow Structures in the Rotor Passage of an Axial Compressor at the Onset of Stall

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Huang Chen ◽  
Yuanchao Li ◽  
David Tan ◽  
Joseph Katz
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Incidence Angle ◽  
Axial Compressor ◽  
Leading Edge ◽  
Suction Side ◽  
Stereoscopic Particle Image Velocimetry ◽  
High Speed Imaging ◽  
Vortical Structures ◽  
Flow Phenomena

Experiments preformed in the JHU refractive index matched facility examine flow phenomena developing in the rotor passage of an axial compressor at the onset of stall. High-speed imaging of cavitation performed at low pressures qualitatively visualizes vortical structures. Stereoscopic particle image velocimetry (SPIV) measurements provide detailed snapshots and ensemble statistics of the flow in a series of meridional planes. At prestall condition, the tip leakage vortex (TLV) breaks up into widely distributed intermittent vortical structures shortly after rollup. The most prominent instability involves periodic formation of large-scale backflow vortices (BFVs) that extend diagonally upstream, from the suction side (SS) of one blade at midchord to the pressure side (PS) near the leading edge of the next blade. The 3D vorticity distributions obtained from data recorded in closely spaced planes show that the BFVs originate form at the transition between the high circumferential velocity region below the TLV center and the main passage flow radially inward from it. When the BFVs penetrate to the next passage across the tip gap or by circumventing the leading edge, they trigger a similar phenomenon there, sustaining the process. Further reduction in flow rate into the stall range increases the number and size of the backflow vortices, and they regularly propagate upstream of the leading edge of the next blade, where they increase the incidence angle in the tip corner. As this process proliferates circumferentially, the BFVs rotate with the blades, indicating that there is very little through flow across the tip region.

Thermal Investigation of Integrated Combustor Vane Concept Under Engine-Realistic Conditions

2016 ◽  
Author(s):  
Simon Jacobi ◽  
Budimir Rosic
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Gas Turbines ◽  
High Speed ◽  
Secondary Flows ◽  
Experimental Measurements ◽  
Thermal Investigation ◽  
Nozzle Guide ◽  
The Heat Transfer Coefficient

This paper presents a thermal investigation of the Integrated Combustor Vane concept for power generation gas turbines with individual can combustors. This concept has the potential to replace the high-pressure turbine’s first vanes by prolonged combustor walls. Experimental measurements are performed on a linear high-speed cascade consisting of two can combustors and two integrated vanes. The modularity of the facility allows for the testing at engine-realistic high turbulence levels, as well as swirl strengths with opposing swirl directions. The heat transfer characteristics of the integrated vanes are compared to conventional nozzle guide vanes. The experimental measurements are supported by detailed numerical simulations using the inhouse CFD code TBLOCK. Experimental as well as numerical results congruently indicate a considerable reduction of the heat transfer coefficient (HTC) on the integrated vanes surfaces and endwalls caused by a differing state of boundary layer thickness. The studies furthermore depict a slight, non-detrimental shift in the heat transfer coefficient distributions and the strength of the integrated vanes secondary flows as a result of engine-realistic combustor swirl.

Large Eddy Simulation on the Interactions of Wake and Film-Cooling Near a Leading Edge

2014 ◽  
Author(s):  
Harish Babu ◽  
S. Sarkar
Keyword(s):  
Large Eddy Simulation ◽  
Film Cooling ◽  
Vortex Pair ◽  
Leading Edge ◽  
Horseshoe Vortex ◽  
Constant Thickness ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Flow Past A Cylinder ◽  
Rotor Stator Interaction

The unsteady flow physics due to interactions between a separated shear layer and film cooling jet apart from excitation of periodic passing wake are studied using Large Eddy Simulation (LES). An aerofoil of constant thickness with rounded leading edge induced flow separation, while film cooling jets were injected normal to the crossflow a short distance downstream of the blend point. Wake data extracted from precursor LES of flow past a cylinder are used to replicate a moving bar that generates wakes in front of a cascade (in this case, an infinite row of the model aerofoils). This setup is a simplified representation of rotor-stator interaction in a film cooled gas turbine. The results of numerical simulation are presented to elucidate the formation, convection and breakdown of flow structures associated with the highly anisotropic flow involved in film cooling perturbed by convective wakes. The various vortical structures namely, horseshoe vortex, roller vortex, upright wake vortex, counter rotating vortex pair and DSSN vortex associated with film cooling are resolved. The effects of wake on the evolution of these structures are then discussed.

scholarly journals Development and Aerothermal Investigation of Integrated Combustor Vane Concept

2015 ◽  
Author(s):  
Simon Jacobi ◽  
Budimir Rosic
Keyword(s):  
Film Cooling ◽  
Gas Turbines ◽  
High Speed ◽  
Cfd Simulations ◽  
Pressure Loss Coefficient ◽  
Development Costs ◽  
Superior Surface ◽  
Novel Concept ◽  
Nozzle Guide ◽  
Stage Efficiency

This paper presents the development and aerothermal investigation of the Integrated Combustor Vane concept for power generation gas turbines with individual can combustors. In this novel concept, first introduced in 2010 [1], the conventional Nozzle Guide Vanes (NGVs) are removed and flow turning is achieved by vanes that extend the combustor walls. The concept is developed using the inhouse CFD code TBLOCK. Aerothermal experiments are conducted using a modular high speed linear cascade, designed to model the flow at the combustor-vane interface. The facility comprises two can combustor transition ducts and either four Conventional Vanes (CVs) or two Integrated Vanes (IVs). The experimental study validates the linear CFD-simulations of the IV development. Annular full stage CFD-simulations, used to evaluate aerodynamics, heat transfer and stage efficiency, confirm the trends of the linear numerical and experimental results and thus demonstrate the concept’s potential for real gas turbine applications. Results show a reduction of the total pressure loss coefficient at the exit of the stator vanes by more than 25% due to a reduction in profile- and endwall-loss. Combined with an improved rotor performance these aerodynamic benefits result in a gain in stage efficiency of above 1%, illustrated by unsteady stage simulations. A distinct reduction in HTC levels on vane surfaces, in the order of 25%–50%, and endwalls is observed and attributed to an altered state of boundary layer thickness. The development of IV’s endwall- and LE-cooling geometry shows a superior surface coverage of cooling effectiveness, and the cooling requirements for the first vane are expected to be halved. Moreover, by halving the number of vanes, simplifying the design and eliminating the need for vane LE film cooling, manufacturing and development costs can be significantly reduced.

Sign in / Sign up

Export Citation Format

Share Document