Metastructure With Piezoelectric Element for Simultaneous Vibration Suppression and Energy Harvesting

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Guobiao Hu ◽  
Lihua Tang ◽  
Arnab Banerjee ◽  
Raj Das
Keyword(s):  
Mathematical Model ◽  
Energy Harvesting ◽  
Band Gap ◽  
Electromechanical Coupling ◽  
Vibration Suppression ◽  
Stop Band ◽  
Design Guidelines ◽  
Unit Cell ◽  
Coupled Systems ◽  
Piezoelectric Energy

Inspired by the mechanism of acoustic–elastic metamaterial (AEMM) that exhibits a stop band gap for wave transmission, simultaneous vibration suppression and energy harvesting can be achieved by integrating AEMM with energy-harvesting component. This article presents an analytical study of a multifunctional system based on this concept. First, a mathematical model of a unit-cell AEMM embedded with a piezoelectric transducer is developed and analyzed. The most important finding is the double-valley phenomenon that can intensively widen the band gap under strong electromechanical coupling condition. Based on the mathematical model, a dimensionless parametric study is conducted to investigate how to tune the system to enhance its vibration suppression ability. Subsequently, a multicell system is conceptualized from the findings of the unit-cell system. In a similar way, dimensionless parametric studies are conducted to optimize the vibration suppression performance and the energy-harvesting performance severally. It turns out that different impedance matching schemes are required to achieve optimal vibration suppression and energy harvesting. To handle this problem, compromising solutions are proposed for weakly and strongly coupled systems, respectively. Finally, the characteristics of the AEMM-based piezoelectric energy harvester (PEH) from two functional aspects are summarized, providing several design guidelines in terms of system parameter tuning. It is concluded that certain tradeoff is required in the process of optimizing the performance toward dual functionalities.

Energy harvesting using an array of multifunctional resonators

2012 ◽  
Vol 24 (2) ◽  
pp. 168-179 ◽  
Author(s):  
Kota Mikoshiba ◽  
James M Manimala ◽  
CT Sun
Keyword(s):  
Energy Harvesting ◽  
Kinetic Energy ◽  
Resonance Frequency ◽  
Band Gap ◽  
Vibration Isolation ◽  
Microelectromechanical Systems ◽  
Stop Band ◽  
Unit Cell ◽  
External Work ◽  
Local Resonance

Energy harvesting from structural vibrations using an array of multifunctional resonators based on the theory of locally resonant materials is demonstrated. Such locally resonant structures exhibit a stop band for elastic wave propagation. The band gap frequency range depends on the local resonance frequency of the microstructure. One method to realize this is through the use of an array of embedded resonators where the external work done is stored as kinetic energy of the internal mass when the forcing frequency is close to the local resonance frequency. This mechanism can be used to harvest energy by converting the kinetic energy into electrical energy, thus bestowing a multifunctional utility to the structure. We use a spring-loaded magnet enclosed in a capped poly(methyl methacrylate) tube equipped with copper coils to create a unit cell that acts both as a resonator and as a linear generator. Experiments on a serial array of seven unit cells exhibit a band gap between 146.5 (local resonance frequency) and 171 Hz with a peak voltage generation of 3.03 V at steady state. The continuous effective power generated by a single unit cell across a 1-Ω load resistor is 36 mW, indicating the feasibility of constructing vibration isolation structures that can power simple electronic and microelectromechanical systems devices. The applicability of using the device as a transducer to measure the local resonance frequency and the global resonance frequency of the structure is also discussed.

scholarly journals Modeling and Experiment of a V-Shaped Piezoelectric Energy Harvester

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Yue Zhao ◽  
Yi Qin ◽  
Lei Guo ◽  
Baoping Tang
Keyword(s):  
Energy Harvesting ◽  
Frequency Band ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Structural Parameters ◽  
Ambient Vibration ◽  
Piezoelectric Bimorph ◽  
Actual Structure ◽  
Piezoelectric Energy ◽  
Operation Frequency

Vibration-based energy harvesting technology is the most promising method to solve the problems of self-powered wireless sensor nodes, but most of the vibration-based energy harvesters have a rather narrow operation bandwidth and the operation frequency band is not convenient to adjust when the ambient frequency changes. Since the ambient vibration may be broadband and changeable, a novel V-shaped vibration energy harvester based on the conventional piezoelectric bimorph cantilevered structure is proposed, which successfully improves the energy harvesting efficiency and provides a way to adjust the operation frequency band of the energy harvester conveniently. The electromechanical coupling equations are established by using Euler-Bernoulli equation and piezoelectric equation, and then the coupled circuit equation is derived based on the series connected piezoelectric cantilevers and Kirchhoff's laws. With the above equations, the output performances of V-shaped structure under different structural parameters and load resistances are simulated and discussed. Finally, by changing the angle θ between two piezoelectric bimorph beams and the load resistance, various comprehensive experiments are carried out to test the performance of this V-shaped energy harvester under the same excitation. The experimental results show that the V-shaped energy harvester can not only improve the frequency response characteristic and the output performance of the electrical energy, but also conveniently tune the operation bandwidth; thus it has great application potential in actual structure health monitoring under variable working condition.

A parametric analysis of the nonlinear dynamics of bistable vibration-based piezoelectric energy harvesters

2020 ◽  
pp. 1045389X2096318
Author(s):  
Luã Guedes Costa ◽  
Luciana Loureiro da Silva Monteiro ◽  
Pedro Manuel Calas Lopes Pacheco ◽  
Marcelo Amorim Savi
Keyword(s):  
Nonlinear Dynamics ◽  
Energy Harvesting ◽  
Parametric Analysis ◽  
Electromechanical Coupling ◽  
Performance Enhancement ◽  
Piezoelectric Materials ◽  
Electrical Power ◽  
Harmonic Excitation ◽  
Piezoelectric Energy ◽  
Harvesting Systems

Piezoelectric materials exhibit electromechanical coupling properties and have been gained importance over the last few decades due to their broad range of applications. Vibration-based energy harvesting systems have been proposed using the direct piezoelectric effect by converting mechanical into electrical energy. Although the great relevance of these systems, performance enhancement strategies are essential to improve the applicability of these system and have been studied substantially. This work addresses a numerical investigation of the influence of cubic polynomial nonlinearities in energy harvesting systems considering a bistable structure subjected to harmonic excitation. A deep parametric analysis is carried out employing nonlinear dynamics tools. Results show complex dynamical behaviors associated with the trigger of inter-well motion. Electrical power output and efficiency are monitored in order to evaluate the configurations associated with best system performances.

Modeling and Analysis of Piezoelectric Energy Harvesting From Aeroelastic Vibrations Using the Doublet-Lattice Method

2010 ◽  
Vol 133 (1) ◽  
Author(s):  
Carlos De Marqui ◽  
Wander G. R. Vieira ◽  
Alper Erturk ◽  
Daniel J. Inman
Keyword(s):  
Energy Source ◽  
Energy Harvesting ◽  
Frequency Domain ◽  
Electromechanical Coupling ◽  
Lattice Method ◽  
Modeling And Analysis ◽  
Piezoelectric Energy ◽  
Doublet Lattice Method ◽  
Aeroelastic Vibrations ◽  
Air Vehicles

Multifunctional structures are pointed out as an important technology for the design of aircraft with volume, mass, and energy source limitations such as unmanned air vehicles (UAVs) and micro air vehicles (MAVs). In addition to its primary function of bearing aerodynamic loads, the wing/spar structure of an UAV or a MAV with embedded piezoceramics can provide an extra electrical energy source based on the concept of vibration energy harvesting to power small and wireless electronic components. Aeroelastic vibrations of a lifting surface can be converted into electricity using piezoelectric transduction. In this paper, frequency-domain piezoaeroelastic modeling and analysis of a cantilevered platelike wing with embedded piezoceramics is presented for energy harvesting. The electromechanical finite-element plate model is based on the thin-plate (Kirchhoff) assumptions while the unsteady aerodynamic model uses the doublet-lattice method. The electromechanical and aerodynamic models are combined to obtain the piezoaeroelastic equations, which are solved using a p-k scheme that accounts for the electromechanical coupling. The evolution of the aerodynamic damping and the frequency of each mode are obtained with changing airflow speed for a given electrical circuit. Expressions for piezoaeroelastically coupled frequency response functions (voltage, current, and electrical power as well the vibratory motion) are also defined by combining flow excitation with harmonic base excitation. Hence, piezoaeroelastic evolution can be investigated in frequency domain for different airflow speeds and electrical boundary conditions.

Broadband Seismic Isolation of Periodic Ladder Frame Structure

2020 ◽  
Vol 143 (1) ◽  
Author(s):  
Rajan Prasad ◽  
Abhijit Sarkar
Keyword(s):  
Periodic Structure ◽  
Seismic Isolation ◽  
Periodic Structures ◽  
Stop Band ◽  
Design Guidelines ◽  
Unit Cell ◽  
Frame Structure ◽  
Design Parameters ◽  
Pictorial Presentation ◽  
Selection Of

Abstract Ladder frame structures are used as models for multistorey buildings. These periodic structures exhibit alternating propagating and attenuating frequency bands. Of the six different wave modes of propagation, two modes strongly attenuate at all frequencies. The other four modes have nonoverlapping stop band characteristics. Thus, it is challenging to isolate such structures when subjected to broadband, multimodal base excitation. In this study, we seek to synthesize a periodic ladder frame structure that has attenuation characteristics over the maximal range of frequencies for all the modes of wave propagation. We synthesize a unit cell of the periodic structure, which comprises two distinct regions having different inertial, stiffness, and geometric properties. The eigenvalues of the transfer matrix of the unit cell determines the attenuating or the nonattenuating characteristics of the structure. A novel pictorial presentation in the form of eigenvalue map is developed. This is used to synthesize the optimal unit cell. Also, design guidelines for suitable selection of the design parameters are presented. It is shown that a large finite periodic structure comprising a unit cell synthesized using the present approach has significantly better isolation characteristics in comparison to the homogeneous or any other arbitrarily chosen periodic structure.

scholarly journals Analytical Electromechanical Modeling of Nanoscale Flexoelectric Energy Harvesting

2019 ◽  
Vol 9 (11) ◽  
pp. 2273 ◽  
Author(s):  
Yaxuan Su ◽  
Xiaohui Lin ◽  
Rui Huang ◽  
Zhidong Zhou
Keyword(s):  
Energy Harvesting ◽  
Power Density ◽  
Output Power ◽  
Electromechanical Coupling ◽  
Scale Effects ◽  
Dielectric Materials ◽  
Small Scale ◽  
Mechanical Excitation ◽  
Piezoelectric Energy ◽  
Intrinsic Length

With the attention focused on harvesting energy from the ambient environment for nanoscale electronic devices, electromechanical coupling effects in materials have been studied for many potential applications. Flexoelectricity can be observed in all dielectric materials, coupling the strain gradients and polarization, and may lead to strong size-dependent effects at the nanoscale. This paper investigates the flexoelectric energy harvesting under the harmonic mechanical excitation, based on a model similar to the classical Euler–Bernoulli beam theory. The electric Gibbs free energy and the generalized Hamilton’s variational principle for a flexoelectric body are used to derive the coupled governing equations for flexoelectric beams. The closed-form electromechanical expressions are obtained for the steady-state response to the harmonic mechanical excitation in the flexoelectric cantilever beams. The results show that the voltage output, power density, and mechanical vibration response exhibit significant scale effects at the nanoscale. Especially, the output power density for energy harvesting has an optimal value at an intrinsic length scale. This intrinsic length is proportional to the material flexoelectric coefficient. Moreover, it is found that the optimal load resistance for peak power density depends on the beam thickness at the small scale with a critical thickness. Our research indicates that flexoelectric energy harvesting could be a valid alternative to piezoelectric energy harvesting at micro- or nanoscales.

Phononic band gap of a quarter-wave stack for enhanced piezoelectric energy harvesting

2021 ◽  
Vol 189 ◽  
pp. 106003 ◽  
Author(s):  
Yong Chang Shin ◽  
Heonjun Yoon ◽  
Soo-Ho Jo ◽  
Wonjae Choi ◽  
Choon-Su Park ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Band Gap ◽  
Piezoelectric Energy Harvesting ◽  
Phononic Band Gap ◽  
Piezoelectric Energy ◽  
Quarter Wave

scholarly journals A Review of Power Management Integrated Circuits for Ultrasound-Based Energy Harvesting in Implantable Medical Devices

2021 ◽  
Vol 11 (6) ◽  
pp. 2487
Author(s):  
Andrea Ballo ◽  
Michele Bottaro ◽  
Alfio Dario Grasso
Keyword(s):  
Energy Harvesting ◽  
Power Management ◽  
Medical Devices ◽  
Power Efficiency ◽  
Building Blocks ◽  
Design Guidelines ◽  
Power Budget ◽  
Implantable Medical Devices ◽  
Piezoelectric Energy ◽  
Piezoelectric Devices

This paper aims to review the recent architectures of power management units for ultrasound-based energy harvesting, while focusing on battery-less implantable medical devices. In such systems, energy sustainability is based on piezoelectric devices and a power management circuit, which represents a key building block since it maximizes the power extracted from the piezoelectric devices and delivers it to the other building blocks of the implanted device. Since the power budget is strongly constrained by the dimension of the piezoelectric energy harvester, complexity of topologies have been increased bit by bit in order to achieve improved power efficiency also in difficult operative conditions. With this in mind, the introduced work consists of a comprehensive presentation of the main blocks of a generic power management unit for ultrasound-based energy harvesting and its operative principles, a review of the prior art and a comparative study of the performance achieved by the considered solutions. Finally, design guidelines are provided, allowing the designer to choose the best topology according to the given design specifications and technology adopted.

scholarly journals Geometrical Investigation of Piezoelectric Patches for Broadband Energy Harvesting in Non-Deterministic Composite Plates

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7370
Author(s):  
Asan G. A. Muthalif ◽  
Abdelrahman Ali ◽  
Jamil Renno ◽  
Azni N. Wahid ◽  
Khairul A. M. Nor ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Fiber Orientation ◽  
Electromechanical Coupling ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Potential ◽  
Composite Plates ◽  
Maximum Energy ◽  
Fe Model ◽  
Piezoelectric Energy

Mechanical energy is the most ubiquitous form of energy that can be harvested and converted into useful electrical power. For this reason, the piezoelectric energy harvesters (PEHs), with their inherent electromechanical coupling and high-power density, have been widely incorporated in many applications to generate power from ambient mechanical vibrations. However, one of the main challenges to the wider adoption of PEHs is how to optimize their design for maximum energy harvesting. In this paper, an investigation was conducted on the energy harvesting from seven piezoelectric patch shapes (differing in the number of edges) when attached to a non-deterministic laminated composite (single/double lamina) plate subjected to change in fiber orientation. The performance of the PEHs was examined through a coupled-field finite element (FE) model. The plate was simply supported, and its dynamics were randomized by attaching randomly distributed point masses on the plate surface in addition to applying randomly located time-harmonic point forces. The randomization of point masses and point force location on a thin plate produce non-deterministic response. The design optimization was performed by employing the ensemble-responses of the electrical potential developed across the electrodes of the piezoelectric patches. The results present the optimal fiber orientation and patch shape for maximum energy harvesting in the case of single and double lamina composite plates. The results show that the performance is optimal at 0° or 90° fiber orientation for single-lamina, and at 0°/0° and 0°/90° fiber orientations for double-lamina composites. For frequencies below 25 Hz, patches with a low number of edges exhibited a higher harvesting performance (triangular for single-lamina/quadrilateral for double-lamina). As for the broadband frequencies (above 25 Hz), the performance was optimal for the patches with a higher number of edges (dodecagonal for single-lamina/octagonal for double-lamina).

Sign in / Sign up

Export Citation Format

Share Document