Finite-Element and Residual Stress Analysis of Self-Pierce Riveting in Dissimilar Metal Sheets

2016 ◽  
Vol 139 (2) ◽  
Author(s):  
Li Huang ◽  
J. F. C. Moraes ◽  
Dimitry G. Sediako ◽  
J. B. Jordon ◽  
Haiding Guo ◽  
...  
Keyword(s):  
Residual Stress ◽  
Internal State ◽  
Material Model ◽  
Stress Profile ◽  
Maximum Shear Strain ◽  
Residual Stress Profile ◽  
Dissimilar Metal ◽  
Metal Sheets ◽  
Explicit Analysis ◽  
Element Erosion

The residual stress profile in dissimilar metal sheets joined by a self-piercing rivet is simulated and compared to experimental measurements. Simulation of joining aluminum alloy 6111-T4 and steel HSLA340 sheets by self-piercing riveting (SPR) is performed using a two-dimensional axisymmetric model with an internal state variable (ISV) plasticity material model. Strain rate and temperature dependent deformation of the base materials is described by the ISV material model and calibrated with experimental data. Using the LS-DYNA simulation package, an element erosion technique is adopted in an explicit analysis of the separation of the upper sheet with maximum shear strain failure criterion. An explicit analysis with dynamic relaxation technique was then used for springback and cooling down analysis following the riveting simulation. The residual stress profile of SPR experimental joint with same configuration is characterized using neutron diffraction, and good agreement was found between the simulation and residual stress measurements.

Through-Thickness Welding Residual Stress Profile in Dissimilar Metal Nozzle Butt Weld

2010 ◽  
Author(s):  
Tae-Kwang Song ◽  
Ji-Soo Kim ◽  
Chang-Young Oh ◽  
Hong-Yeol Bae ◽  
Jun-Young Jeon ◽  
...  
Keyword(s):  
Residual Stress ◽  
Welding Residual Stress ◽  
Stress Profile ◽  
Pressurized Water ◽  
Butt Weld ◽  
Butt Welds ◽  
Residual Stress Profile ◽  
Dissimilar Metal ◽  
Stress Profiles ◽  
Water Reactors

This paper provides the through-thickness welding residual stress profile in dissimilar metal nozzle butt welds of pressurized water reactors. For systematic investigations of the effects of geometric variables, i.e. the thickness and the radius of the nozzle and the length of the safe end, on welding residual stresses, idealized shape of nozzle is proposed and elastic-plastic thermo-mechanical finite element analyses are conducted. Through-wall welding residual stress profiles for dissimilar metal nozzle butt welds are proposed, which take a modified form of existing welding residual stress profiles developed for austenitic pipe butt weld in R6 code.

Residual stress prediction based on MTS model during machining of Ti-6Al-4V

2018 ◽  
Vol 233 (11) ◽  
pp. 3743-3750 ◽  
Author(s):  
Zhipeng Pan ◽  
Steven Y Liang ◽  
Hamid Garmestani ◽  
Donald Shih ◽  
Eric Hoar
Keyword(s):  
Residual Stress ◽  
Internal State ◽  
Machining Process ◽  
Stress Profile ◽  
State Variables ◽  
Workpiece Material ◽  
Dislocation Interaction ◽  
Residual Stress Profile ◽  
Mechanical Threshold ◽  
Stress Prediction

The material microstructure attributes are largely ignored in the machining community for the machining mechanics modeling. A physical-based mechanical threshold stress (MTS) model is proposed for the orthogonal turning application of Ti-6Al-4V material. The MTS model takes the material internal state variables, such as dislocation to dislocation interaction and dislocation/interstitial resistance, into the flow stress consideration. The MTS model is embedded into an analytical residual stress prediction model for machining induced residual stress prediction. The experimental data are provided for the model validation. The prediction generally captures the trend of the residual stress profile compared with experiments. The proposed model provides a microstructure insight of the workpiece material in the machining process modeling.

Finite Element Simulation of the Residual Stress States after Shot Peening

2006 ◽  
Vol 524-525 ◽  
pp. 349-354 ◽  
Author(s):  
Manuel Klemenz ◽  
Volker Schulze ◽  
Otmar Vöhringer ◽  
Detlef Löhe
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Finite Element Simulation ◽  
Shot Peening ◽  
Three Dimensional ◽  
Material Model ◽  
Stress Profile ◽  
Viscoplastic Material ◽  
Residual Stress Profile ◽  
Element Simulation

In a three-dimensional Finite-Element-Simulation of shot peening, a combined isotropickinematic viscoplastic material description was introduced in order to describe the cyclic softening effects during peening. After verifying the model in the simulation of push-pull tests at different strain amplitudes it could be used for the shot peening simulation. The simulated residual stress profile is compared with experimental results determined by X-ray diffraction and with simulated results of a simpler isotropic viscoplastic material model.

Finite element modeling of residual stress profile patterns in hard turning

2009 ◽  
Vol 24 (S1) ◽  
pp. S22-S25
Author(s):  
Y. B. Guo ◽  
S. Anurag
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Finite Element Modeling ◽  
Hard Turning ◽  
Internal State ◽  
Stress Profile ◽  
Surface Residual Stress ◽  
Mechanical Coupling ◽  
Element Modeling ◽  
Stress Profiles

Hard turning, i.e., turning hardened steels, may produce the unique “hook” shaped residual stress (RS) profile characterized by surface compressive RS and subsurface maximum compressive RS. However, the formation mechanism of the unique RS profile is not yet known. In this study, a novel hybrid finite element modeling approach based on thermal-mechanical coupling and internal state variable plasticity model has been developed to predict the unique RS profile patterns by hard turning AISI 52100 steel (62 HRc). The most important controlling factor for the unique characteristics of residual stress profiles has been identified. The transition of maximum residual stress at the surface to the subsurface has been recovered by controlling the plowed depth. The predicted characteristics of residual stress profiles favorably agree with the measured ones. In addition, friction coefficient only affects the magnitude of surface residual stress but not the basic shape of residual stress profiles.

scholarly journals Influence of residual stress profile and surface microstructure on fatigue life of a 15-5PH

2018 ◽  
Vol 213 ◽  
pp. 623-629 ◽  
Author(s):  
F. Valiorgue ◽  
V. Zmelty ◽  
M. Dumas ◽  
V. Chomienne ◽  
C. Verdu ◽  
...  
Keyword(s):  
Residual Stress ◽  
Fatigue Life ◽  
Surface Microstructure ◽  
Stress Profile ◽  
Residual Stress Profile

scholarly journals Cross-Sectional Mapping of Residual Stresses by Measuring the Surface Contour After a Cut

2000 ◽  
Vol 123 (2) ◽  
pp. 162-168 ◽  
Author(s):  
M. B. Prime
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Stress Measurement ◽  
Superposition Principle ◽  
New Method ◽  
Contour Method ◽  
Stress Profile ◽  
Relaxation Methods ◽  
Cross Sectional ◽  
Residual Stress Profile

A powerful new method for residual stress measurement is presented. A part is cut in two, and the contour, or profile, of the resulting new surface is measured to determine the displacements caused by release of the residual stresses. Analytically, for example using a finite element model, the opposite of the measured contour is applied to the surface as a displacement boundary condition. By Bueckner’s superposition principle, this calculation gives the original residual stresses normal to the plane of the cut. This “contour method” is more powerful than other relaxation methods because it can determine an arbitrary cross-sectional area map of residual stress, yet more simple because the stresses can be determined directly from the data without a tedious inversion technique. The new method is verified with a numerical simulation, then experimentally validated on a steel beam with a known residual stress profile.

Study of Effect of Repetition Rate on Laser Shock Peening Using Finite Element Modeling

2020 ◽  
Author(s):  
Sai Kosaraju ◽  
Xin Zhao
Keyword(s):  
Shock Wave ◽  
Residual Stress ◽  
Finite Element ◽  
Shock Waves ◽  
Repetition Rate ◽  
High Repetition Rate ◽  
Stress Profile ◽  
Surface Residual Stress ◽  
Residual Stress Profile ◽  
High Repetition

Abstract A two-dimensional finite element model is developed to simulate the interaction between metal samples and laser-induced shock waves. Multiple laser impacts are applied at each location to increase plastically affected depth and compressive stress. The in-depth and surface residual stress profiles are analyzed at various repetition rates and spot sizes. It is found that the residual stress is not sensitive to repetition rate until it reaches a very high level. At extremely high repetition rate (100 MHz), the delay between two shock waves is even shorter than their duration, and there will be shock wave superposition. It is revealed that the interaction of metal with shock wave is significantly different, leading to a different residual stress profile. Stronger residual stress with deeper distribution will be obtained comparing with lower repetition rate cases. The effect of repetition rate at different spot sizes is also studied. It is found that with larger laser spot, the peak compressive residual stress decreases but the distribution is deeper at extremely high repetition rates.

Sign in / Sign up

Export Citation Format

Share Document