Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Dusty Fluid Toward a Stretching Sheet

2016 ◽  
Vol 138 (11) ◽  
Author(s):  
M. R. Mohaghegh ◽  
Asghar B. Rahimi
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Stagnation Point ◽  
Similarity Solution ◽  
Stretching Sheet ◽  
Three Dimensional ◽  
Stagnation Point Flow ◽  
Velocity Parameter ◽  
Flow And Heat Transfer

The steady three-dimensional stagnation-point flow and heat transfer of a dusty fluid toward a stretching sheet is investigated by using similarity solution approach. The freestream along z-direction impinges on the stretching sheet to produce a flow with different velocity components. The governing equations are transformed into ordinary differential equations by introducing appropriate similarity variables and an exact solution is obtained. The nonlinear ordinary differential equations are solved numerically using Runge–Kutta fourth-order method. The effects of the physical parameters like velocity ratio, fluid and thermal particle interaction parameter, ratio of freestream velocity parameter to stretching sheet velocity parameter, Prandtl number, and Eckert number on the flow field and heat transfer characteristics are obtained, illustrated graphically, and discussed. Also, a comparison of the obtained numerical results is made with two-dimensional cases existing in the literature and good agreement is approved. Moreover, it is found that the heat transfer coefficient and shear stress on the surface for axisymmetric case are larger than nonaxisymmetric case. Also, for stationary flat plat case, a similarity solution is presented and a comparison of the obtained results is made with previously published results and full agreement is reported.

Unsteady Two-Dimensional Stagnation-Point Flow and Heat Transfer of a Viscous, Compressible Fluid on an Accelerated Flat Plate

2014 ◽  
Vol 136 (4) ◽  
Author(s):  
H. R. Mozayyeni ◽  
Asghar B. Rahimi
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Flat Plate ◽  
Ordinary Differential Equations ◽  
Stagnation Point ◽  
Stagnation Point Flow ◽  
Far Field ◽  
Two Dimensional ◽  
Flow And Heat Transfer ◽  
Wide Range

The general formulation and exact solution of the Navier–Stokes and energy equations regarding the problem of steady and unsteady two-dimensional stagnation-point flow and heat transfer is investigated in the vicinity of a flat plate. The plate is moving at time-dependent or constant velocity towards the main low Mach number free stream or away from it. The main stream impinges along z-direction on the flat plate with strain rate a and produces two-dimensional flow. The fluid is assumed to be viscous and compressible. The density of the fluid is affected by the existing temperature difference between the plate and potential far field flow. Suitably introduced similarity transformations are used to reduce the governing equations to a coupled system of ordinary differential equations. Finite Difference Scheme is used to solve these non-linear ordinary differential equations. The obtained results are presented over a wide range of parameters characterizing the problem. It is revealed that the significance of the increase of thermal expansion coefficient, β, and wall temperature on velocity and temperature distributions is much more noticeable for a plate moving away from impinging flow. Moreover, negligible shear stress and heat transfer is reported between the plate and fluid viscous layer close to the plate for a wide range of β coefficient when the plate moves away from incoming far field flow.

Numerical solutions of non-alignment stagnation-point flow and heat transfer over a stretching/shrinking surface in a nanofluid

2016 ◽  
Vol 26 (6) ◽  
pp. 1747-1767 ◽  
Author(s):  
Ioan Pop ◽  
Kohi Naganthran ◽  
Roslinda Nazar
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Numerical Solutions ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Content Type ◽  
Boundary Layer Equations ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

Purpose – The purpose of this paper is to analyse numerically the steady stagnation-point flow of a viscous and incompressible fluid over continuously non-aligned stretching or shrinking surface in its own plane in a water-based nanofluid which contains three different types of nanoparticles, namely, Cu, Al2O3 and TiO2. Design/methodology/approach – Similarity transformation is used to convert the system of boundary layer equations which are in the form of partial differential equations into a system of ordinary differential equations. The system of similarity governing equations is then reduced to a system of first-order differential equations and solved numerically using the bvp4c function in Matlab software. Findings – Unique solution exists when the surface is stretched and dual solutions exist as the surface shrunk. For the dual solutions, stability analysis has revealed that the first solution (upper branch) is stable and physically realizable, while the second solution (lower branch) is unstable. The effect of non-alignment is huge for the shrinking surface which is in contrast with the stretching surface. Practical implications – The results obtained can be used to explain the characteristics and applications of nanofluids, which are widely used as coolants, lubricants, heat exchangers and micro-channel heat sinks. This problem also applies to some situations such as materials which are manufactured by extrusion, production of glass-fibre and shrinking balloon. In this kind of circumstance, the rate of cooling and the stretching/shrinking process play an important role in moulding the final product according to preferable features. Originality/value – The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface for the problem considered by Wang (2008) in a viscous fluid and extends to nanofluid by using the Tiwari and Das (2007) model.

Stagnation-Point Flow over an Exponentially Shrinking/Stretching Sheet

2011 ◽  
Vol 66 (12) ◽  
pp. 705-711 ◽  
Author(s):  
Sin Wei Wong ◽  
Abu Omar Awang ◽  
Anuar Ishak
Keyword(s):  
Differential Equations ◽  
Stagnation Point ◽  
Stretching Sheet ◽  
Free Stream ◽  
Stagnation Point Flow ◽  
Stream Velocity ◽  
Heat Transfer Characteristics ◽  
Keller Box Method ◽  
Flow And Heat Transfer ◽  
Box Method

The steady two-dimensional stagnation-point flow of an incompressible viscous fluid over an exponentially shrinking/stretching sheet is studied. The shrinking/stretching velocity, the free stream velocity, and the surface temperature are assumed to vary in a power-law form with the distance from the stagnation point. The governing partial differential equations are transformed into a system of ordinary differential equations before being solved numerically by a finite difference scheme known as the Keller-box method. The features of the flow and heat transfer characteristics for different values of the governing parameters are analyzed and discussed. It is found that dual solutions exist for the shrinking case, while for the stretching case, the solution is unique.

Unsteady separated stagnation-point flow and heat transfer past a stretching/shrinking sheet in a copper-water nanofluid

2019 ◽  
Vol 29 (8) ◽  
pp. 2588-2605 ◽  
Author(s):  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Stagnation Point ◽  
Design Methodology ◽  
Similarity Transformation ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to theoretically investigate the unsteady separated stagnation-point flow and heat transfer past an impermeable stretching/shrinking sheet in a copper (Cu)-water nanofluid using the mathematical nanofluid model proposed by Tiwari and Das. Design/methodology/approach A similarity transformation is used to reduce the governing partial differential equations to a set of nonlinear ordinary (similarity) differential equations which are then solved numerically using the function bvp4c from Matlab for different values of the governing parameters. Findings It is found that the solution is unique for stretching case; however, multiple (dual) solutions exist for the shrinking case. Originality/value The authors believe that all numerical results are new and original, and have not been published elsewhere.

Unsteady mixed convection flow at a three-dimensional stagnation point

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Amin Noor ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Stagnation Point ◽  
Three Dimensional ◽  
Convection Flow ◽  
Mixed Convection Flow ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Unsteady Mixed Convection

Purpose This paper aims to probe the problem of an unsteady mixed convection stagnation point flow and heat transfer past a stationary surface in an incompressible viscous fluid numerically. Design/methodology/approach The governing nonlinear partial differential equations are transformed into a system of ordinary differential equations by a similarity transformation, which is then solved numerically by a Runge – Kutta – Fehlberg method with shooting technique and a collocation method, namely, the bvp4c function. Findings The effects of the governing parameters on the fluid flow and heat transfer characteristics are illustrated in tables and figures. It is found that dual (upper and lower branch) solutions exist for both the cases of assisting and opposing flow situations. A stability analysis has also been conducted to determine the physical meaning and stability of the dual solutions. Practical implications This theoretical study is significantly relevant to the applications of the heat exchangers placed in a low-velocity environment and electronic devices cooled by fans. Originality/value The case of suction on unsteady mixed convection flow at a three-dimensional stagnation point has not been studied before; hence, all generated numerical results are claimed to be novel.

scholarly journals Unsteady Three-Dimensional MHD Non-Axisymmetric Homann Stagnation Point Flow of a Hybrid Nanofluid with Stability Analysis

Mathematics ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 784 ◽  
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Stability Analysis ◽  
Differential Equations ◽  
Stagnation Point ◽  
Three Dimensional ◽  
Industrial Sector ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Hybrid Nanofluid

The hybrid nanofluid under the influence of magnetohydrodynamics (MHD) is a new interest in the industrial sector due to its applications, such as in solar water heating and scraped surface heat exchangers. Thus, the present study accentuates the analysis of an unsteady three-dimensional MHD non-axisymmetric Homann stagnation point flow of a hybrid Al2O3-Cu/H2O nanofluid with stability analysis. By employing suitable similarity transformations, the governing mathematical model in the form of the partial differential equations are simplified into a system of ordinary differential equations. The simplified mathematical model is then solved numerically by the Matlab solver bvp4c function. This solving approach was proficient in generating more than one solution when good initial guesses were provided. The numerical results presented significant influences on the rate of heat transfer and fluid flow characteristics of a hybrid nanofluid. The rate of heat transfer and the trend of the skin friction coefficient improve with the increment of the nanoparticles’ concentration and the magnetic parameter; however, they deteriorate when the unsteadiness parameter increases. In contrast, the ratio of the escalation of the ambient fluid strain rate to the plate was able to adjourn the boundary layer separation. The dual solutions (first and second solutions) are obtainable when the surface of the sheet shrunk. A stability analysis is carried out to justify the stability of the dual solutions, and hence the first solution is seen as physically reliable and stable, while the second solution is unstable.

Stagnation Point Flow through a Porous Medium towards a Radially Stretching Sheet in the Presence of Uniform Suction or Injection and Heat Generation

2012 ◽  
Vol 134 (8) ◽  
Author(s):  
Hazem Ali Attia ◽  
Karem Mahmoud Ewis ◽  
Mostafa A. M. Abdeen
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Differential Equations ◽  
Stagnation Point ◽  
Heat Generation ◽  
Stretching Sheet ◽  
Stagnation Point Flow ◽  
Uniform Suction ◽  
Flow Through ◽  
Energy Equations

An analysis is made of the steady laminar axisymmetric stagnation point flow of an incompressible viscous fluid in a porous medium impinging on a permeable radially stretching sheet with heat generation or absorption. A uniform suction or blowing is applied normal to the plate which is maintained at a constant temperature. Similarity transformation is used to transform the governing partial differential equations to ordinary differential equations. The finite difference method and generalized Thomas algorithm are used to solve the governing nonlinear momentum and energy equations. The effects of the uniform suction/blowing velocity, the stretching parameter and the heat generation/absorption coefficient on both the flow field and heat transfer are presented and discussed. The results indicate that increasing the stretching parameter or the suction/blowing velocity decreases both the velocity and thermal boundary layer thicknesses. The effect of the stretching parameter on the velocity components is more apparent for suction than blowing while its effect on the temperature and rate of heat transfer at the wall is clearer in the case of blowing than suction.

Sign in / Sign up

Export Citation Format

Share Document