Multi-Objective Optimization of a Steam Surface Condenser Using the Territorial Particle Swarm Technique

2016 ◽  
Vol 138 (5) ◽  
Author(s):  
Pooya Mirzabeygi ◽  
Chao Zhang
Keyword(s):  
Particle Swarm ◽  
Design Parameters ◽  
Cfd Analysis ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Flow And Heat Transfer ◽  
Surface Condenser ◽  
Computational Fluid Dynamics Cfd ◽  
Shell And Tube ◽  
Outside Diameter

The multi-objective territorial particle swarm optimization (MOTPSO) technique is proposed in this work for the optimal design of steam surface condensers. The main objective of this work is to maximize the condensation rate in a condenser while the pressure loss is minimized. Various design parameters, such as the tube outside diameter, thickness, and pitch, are considered to find the optimal ones for shell and tube heat exchangers considered in this study. The two-dimensional computational fluid dynamics (CFD) analysis is performed to solve the fluid flow and heat transfer in the condenser to assess the performance of different designs.

Multi-objective optimization of squirrel cage fan for range hood based on Kriging model

2021 ◽  
pp. 095440622199586
Author(s):  
Qianhao Xiao ◽  
Jun Wang ◽  
Boyan Jiang ◽  
Weigang Yang ◽  
Xiaopei Yang
Keyword(s):  
Flow Rate ◽  
Optimization Design ◽  
Volume Flow Rate ◽  
Kriging Model ◽  
Volume Flow ◽  
Design Parameters ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Squirrel Cage

In view of the multi-objective optimization design of the squirrel cage fan for the range hood, a blade parameterization method based on the quadratic non-uniform B-spline (NUBS) determined by four control points was proposed to control the outlet angle, chord length and maximum camber of the blade. Morris-Mitchell criteria were used to obtain the optimal Latin hypercube sample based on the evolutionary operation, and different subsets of sample numbers were created to study the influence of sample numbers on the multi-objective optimization results. The Kriging model, which can accurately reflect the response relationship between design variables and optimization objectives, was established. The second-generation Non-dominated Sorting Genetic algorithm (NSGA-II) was used to optimize the volume flow rate at the best efficiency point (BEP) and the maximum volume flow rate point (MVP). The results show that the design parameters corresponding to the optimization results under different sample numbers are not the same, and the fluctuation range of the optimal design parameters is related to the influence of the design parameters on the optimization objectives. Compared with the prototype, the optimized impeller increases the radial velocity of the impeller outlet, reduces the flow loss in the volute, and increases the diffusion capacity, which improves the volume flow rate, and efficiency of the range hood system under multiple working conditions.

scholarly journals A Distributed Multifactorial Particle Swarm Optimization Approach

2021 ◽  
Author(s):  
Ahlem Aboud ◽  
Nizar Rokbani ◽  
Seyedali Mirjalili ◽  
Abdulrahman M. Qahtani ◽  
Omar Almutiry ◽  
...  
Keyword(s):  
Particle Swarm Optimization ◽  
Optimization Problems ◽  
Beta Function ◽  
Particle Swarm ◽  
Search Space ◽  
Optimization Approach ◽  
Multi Objective Optimization ◽  
Swarm Optimization ◽  
Multi Objective ◽  
New System

<p>Multifactorial Optimization (MFO) and Evolutionary Transfer Optimization (ETO) are new optimization challenging paradigms for which the multi-Objective Particle Swarm Optimization system (MOPSO) may be interesting despite limitations. MOPSO has been widely used in static/dynamic multi-objective optimization problems, while its potentials for multi-task optimization are not completely unveiled. This paper proposes a new Distributed Multifactorial Particle Swarm Optimization algorithm (DMFPSO) for multi-task optimization. This new system has a distributed architecture on a set of sub-swarms that are dynamically constructed based on the number of optimization tasks affected by each particle skill factor. DMFPSO is designed to deal with the issues of handling convergence and diversity concepts separately. DMFPSO uses Beta function to provide two optimized profiles with a dynamic switching behaviour. The first profile, Beta-1, is used for the exploration which aims to explore the search space toward potential solutions, while the second Beta-2 function is used for convergence enhancement. This new system is tested on 36 benchmarks provided by the CEC’2021 Evolutionary Transfer Multi-Objective Optimization Competition. Comparatives with the state-of-the-art methods are done using the Inverted General Distance (IGD) and Mean Inverted General Distance (MIGD) metrics. Based on the MSS metric, this proposal has the best results on most tested problems.</p>

Sign in / Sign up

Export Citation Format

Share Document