Improvement of Performance of Wave Power Conversion Due to the Projecting Walls for Oscillating Water Column Type Wave Energy Converter

2016 ◽  
Vol 138 (2) ◽  
Author(s):  
Tomoki Ikoma ◽  
Koichi Masuda ◽  
Hikaru Omori ◽  
Hiroyuki Osawa ◽  
Hisaaki Maeda
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Prediction Method ◽  
Past Research ◽  
Wave Energy Converter ◽  
Air Pressure ◽  
Wave Power ◽  
Linear Potential ◽  
Oscillating Water Column ◽  
Energy Converter

This paper describes a method to improve the performance of primary conversion of wave power takeoff. The wave energy converter (WEC) used here was of oscillating water column (OWC) type. This method for improvement has been already proposed in past research and its usefulness has been confirmed. It involves projecting walls (PWs) being attached to the front of the inlet–outlet of the OWC. The prediction method of hydrodynamic behaviors for the OWC type WEC with PWs installed is explained in this paper. The boundary element method with the Green's function is applied, and influence of air pressure and free surface within every air-chamber was directly taken into consideration in the prediction method based on linear potential theory. Validity of the prediction method was proved by comparing the results with the results of model experiments. Series calculations are performed with the prediction method. Behaviors of air pressure, water elevation, and the efficiency of primary conversion of wave power were investigated. From the calculations, length of the PWs was shown to affect the efficiency of primary conversion. It was possible to equip the PWs so as to enable improvements in oblique waves to beam sea conditions as well as in the head sea conditions. This paper examined not only the PWs but also the application and effects of the end walls (EWs) with the slit. The EWs were very useful to improve the efficiency.

Experimental Study the Performance of a Compact Mooring System for a Dual Chamber Floating Oscillating Water Column Device

2020 ◽  
Author(s):  
Sheng Xu ◽  
K. Rezanejad ◽  
Shan Wang ◽  
J. F. M. Gadelho ◽  
C. Guedes Soares
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Degrees Of Freedom ◽  
Wave Energy Converter ◽  
Air Pressure ◽  
Mooring System ◽  
Oscillating Water Column ◽  
Energy Converter ◽  
Six Degrees Of Freedom ◽  
Motion Responses

Abstract A compact mooring system concept is proposed. This novel mooring is composed of submerged buoy and three segments of nylon ropes, which is suitable for the large wave energy converters and wave energy converter array due to its high flexibility and small mooring radius. The performance of this mooring concept was studied experimentally when it was moored to an oscillating water column. The damping of the oscillating water column was modelled by an orifice on top of the chamber. Both regular and irregular head sea wave tests were conducted. In order to study the influence of wave height on system dynamics, two series of regular wave tests with same periods but different wave heights were conducted. An optical tracking system was installed to capture six degrees of freedom motion responses of oscillating water column. The air pressure in the chamber was measured by the air pressure sensor. Two load cells were installed on the top of mooring lines to measure mooring tension time series. Besides, the wave surface elevations inside the chamber were measured by the wave gauges. According to the experimental results, the six degrees of freedom motion responses of floating wave energy converter and mooring tensions are analyzed. Besides, the energy conversion efficiency is evaluated based on the measured data.

scholarly journals Study on an Oscillating Water Column Wave Power Converter Installed in an Offshore Jacket Foundation for Wind-Turbine System Part I: Open Sea Wave Energy Converting Efficiency

2021 ◽  
Vol 9 (2) ◽  
pp. 133
Author(s):  
Hsien Hua Lee ◽  
Guan-Fu Chen ◽  
Hsiang-Yu Hsieh
Keyword(s):  
Wind Turbine ◽  
Water Column ◽  
Wind Power ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Offshore Wind ◽  
Wave Power ◽  
Oscillating Water Column ◽  
Energy Converter ◽  
Wind Turbine System

This study is focused on the wave energy converter of an oscillating water column (OWC) system that is integrated with a jacket type infrastructure applied for an offshore wind turbine system. In this way, electricity generation by both wind power and wave power can be conducted simultaneously to maximize the utilization of sustainable energy. A numerical analysis was performed in this research to model and simulate the airflow response and evaluate the converting efficiency of wave energy from an OWC system integrated with an offshore template structural system. The performance of the system including the generating airflow velocity, air-pressure in the chamber, generating power and then the converting efficiency of power from waves are all analyzed and discussed in terms of the variations of the OWC system’s geometrical parameters. The parameters under consideration include the exhale orifice-area of airflow, gate-openings of inflow water and the submerged chamber depth. It is found that from the analytical results the performance of the OWC wave energy converter is influenced by the dimensional parameters along with the design conditions of the local environment. After a careful design based on the in-situ conditions including water depth and wave parameters, an open OWC system can be successfully applied to the template structure of offshore wind power infrastructure as a secondary generating system for the multi-purpose utilization of the structure.

Scale and Configuration Effects of an Airchamber on PTO of Oscillating Water Column Type Wave Energy Converters

2021 ◽  
Author(s):  
Tomoki Ikoma ◽  
Shota Hirai ◽  
Yasuhiro Aida ◽  
Koichi Masuda
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Water Surface ◽  
Air Pressure ◽  
Scale Model ◽  
Linear Potential ◽  
Oscillating Water Column ◽  
Wave Energy Converters ◽  
Air Chamber ◽  
Energy Converters

Abstract Wave energy converters (WECs) have been extensively researched. The behaviour of the oscillating water column (OWC) in OWC WECs is extremely complex due to the interaction of waves, air, and turbines. Several problems must be overcome before such WECs can be put to practical use. One problem is that the effect of the difference in scale between a small-scale experimental model and a full-scale model is unclear. In this study, several OWC models with different scales and geometries were used in forced oscillation tests. The wave tank was 7.0 m wide, 24.0 m long, and 1.0 m deep. In the static water experiment, we measured the air pressure and water surface fluctuations in an air chamber. For the experiments, models with a box shape with an open bottom, a manifold shape with an open bottom, and a box shape with a front opening, respectively, were fabricated. Furthermore, 1/1, 1/2, and 1/4 scale models were fabricated for each shape to investigate the effects of scale and shape on the air chamber characteristics. Numerical calculations were carried out by applying linear potential theory and the results were compared with the experimental values. The results confirmed that the air chamber shape and scale affect the air pressure fluctuation and water surface fluctuation inside the OWC system.

An experimental and numerical analysis of an I-beam attenuator-type, oscillating water column wave energy converter

2015 ◽  
pp. 437-443
Author(s):  
Harry Bingham ◽  
Robert Read ◽  
Frederik Jakobsen ◽  
Morten Simonsen ◽  
Pablo Guillen ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Oscillating Water Column ◽  
Energy Converter

scholarly journals Geometric Analysis through the Constructal Design of a Sea Wave Energy Converter with Several Coupled Hydropneumatic Chambers Considering the Oscillating Water Column Operating Principle

2021 ◽  
Vol 11 (18) ◽  
pp. 8630
Author(s):  
Yuri Theodoro Barbosa de Lima ◽  
Mateus das Neves Gomes ◽  
Liércio André Isoldi ◽  
Elizaldo Domingues dos Santos ◽  
Giulio Lorenzini ◽  
...  
Keyword(s):  
Water Column ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Wave Energy ◽  
Performance Indicator ◽  
Wave Energy Converter ◽  
Oscillating Water Column ◽  
Energy Converter ◽  
Constructal Design

The work presents a numerical study of a wave energy converter (WEC) device based on the oscillating water column (OWC) operating principle with a variation of one to five coupled chambers. The main objective is to evaluate the influence of the geometry and the number of coupled chambers to maximize the available hydropneumatic power converted in the energy extraction process. The results were analyzed using the data obtained for hydropneumatic power, pressure, mass flow rate, and the calculated performance indicator’s hydropneumatic power. The Constructal Design method associated with the Exhaustive Search optimization method was used to maximize the performance indicator and determine the optimized geometric configurations. The degrees of freedom analyzed were the ratios between the height and length of the hydropneumatic chambers. A wave tank represents the computational domain. The OWC device is positioned inside it, subject to the regular incident waves. Conservation equations of mass and momentum and one equation for the transport of the water volume fraction are solved with the finite volume method (FVM). The multiphase model volume of fluid (VOF) is used to tackle the water–air mixture. The analysis of the results took place by evaluating the performance indicator in each chamber separately and determining the accumulated power, which represents the sum of all the powers calculated in all chambers. The turbine was ignored, i.e., only the duct without it was analyzed. It was found that, among the cases examined, the device with five coupled chambers converts more energy than others and that there is an inflection point in the performance indicator, hydropneumatic power, as the value of the degree of freedom increases, characterizing a decrease in the value of the performance indicator. With the results of the hydropneumatic power, pressure, and mass flow rate, it was possible to determine a range of geometry values that maximizes the energy conversion, taking into account the cases of one to five coupled chambers and the individual influence of each one.

NUMERICAL ANALYSIS OF A SAVONIUS TURBINE INSERTED IN OSCILLATING WATER COLUMN WAVE ENERGY CONVERTER

2021 ◽  
Author(s):  
Andrei Santos ◽  
Filipe Branco Teixeira ◽  
Liércio Isoldi ◽  
jeferson Avila Souza ◽  
Mateus das Neves Gomes ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Oscillating Water Column ◽  
Energy Converter

Uncertainty in Wave Basin Testing of a Fixed Oscillating Water Column Wave Energy Converter

2021 ◽  
Author(s):  
Frances M. Judge ◽  
Eoin Lyden ◽  
Michael O'Shea ◽  
Brian Flannery ◽  
Jimmy Murphy
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Width Ratio ◽  
Oscillating Water Column ◽  
Energy Converter ◽  
The Monte Carlo Method ◽  
Wave Basin ◽  
Measurement Location ◽  
The Impact

Abstract This research presents a methodology for carrying out uncertainty analysis on measurements made during wave basin testing of an oscillating water column wave energy converter. Values are determined for Type A and Type B uncertainty for each parameter of interest, and uncertainty is propagated using the Monte Carlo method to obtain an overall Expanded Uncertainty with a 95% confidence level associated with the Capture Width Ratio of the device. An analysis into the impact of reflections on the experimental results reveals the importance of identifying the incident and combined wave field at each measurement location used to determine device performance, in order to avoid misleading results.

Sign in / Sign up

Export Citation Format

Share Document