An Experimental and Numerical Investigation on the Effects of Aerothermal Mixing in a Confined Oblique Jet Impingement Configuration

2016 ◽  
Vol 138 (4) ◽  
Author(s):  
Sebastian Schulz ◽  
Alexander Schindler ◽  
Jens von Wolfersdorf
Keyword(s):  
Reynolds Number ◽  
Jet Impingement ◽  
Field Measurements ◽  
Navier Stokes ◽  
Fluid Temperature ◽  
Number Range ◽  
Ansys Cfx ◽  
Image Velocimetry ◽  
Flow Features ◽  
Sst Turbulence Model

An investigation to characterize the effect of entrainment in a confined jet impingement arrangement is presented. The investigated configuration shows an impingement-cooled turbine blade passage and holds two staggered rows of inclined impingement jets. In order to distinctly promote thermal entrainment phenomena, the jets were heated separately. A steady-state liquid crystal technique was used to obtain near-wall fluid temperature distributions for the impingement surfaces under adiabatic conditions. Additionally, flow field measurements were undertaken using particle image velocimetry (PIV). Furthermore, compressible Reynolds-averaged Navier–Stokes (RANS) simulations carried out with ansys cfx using Menter's shear stress transport (SST) turbulence model accompany the experiments. Distributions of effectiveness, velocity, and turbulent kinetic energy detail the complexity of the aerothermal situation. The study was conducted for a jet Reynolds number range from 10,000 to 45,000. The experimental and numerical results are generally in good agreement. Nevertheless, the simulations predict flow features in particular regions of the geometry that are not as prominent in the experiments. These affect the effectiveness distributions, locally. The investigations reveal that the effectiveness is independent of the temperature difference between the heated and cold jet as well as the jet Reynolds number.

An Experimental and Numerical Investigation on the Effects of Aerothermal Mixing in a Confined Oblique Jet Impingement Configuration

2015 ◽  
Author(s):  
Sebastian Schulz ◽  
Alexander Schindler ◽  
Jens von Wolfersdorf
Keyword(s):  
Reynolds Number ◽  
Jet Impingement ◽  
Field Measurements ◽  
Fluid Temperature ◽  
Number Range ◽  
Ansys Cfx ◽  
Image Velocimetry ◽  
Flow Features ◽  
Sst Turbulence Model ◽  
Good Agreement

An investigation to characterize the effect of entrainment in a confined jet impingement arrangement is presented. The investigated configuration models an impingement cooled turbine blade passage and holds two staggered rows of inclined impingement jets. In order to distinctly promote thermal entrainment phenomena the jets were heated separately. A steady-state liquid crystal technique was used to obtain near-wall fluid temperature distributions for the impingement surfaces at adiabatic conditions. Additionally, flow field measurements were undertaken using Particle Image Velocimetry (PIV). Furthermore, compressible RANS simulations were carried out with ANSYS CFX using Menter’s SST turbulence model to accompany the experiments. Distributions of effectiveness, velocity, and turbulent kinetic energy detail the complexity of the aerothermal situation. The study was conducted for a jet Reynolds number range from 10,000 to 45,000. The experimental and numerical results are generally in good agreement. Nevertheless, the simulations predict flow features in particular regions of the geometry that are not as prominent in the experiments. These affect the effectiveness distributions, locally. The investigations revealed that the effectiveness is independent of the temperature difference between the heated and cold jet as well as the jet Reynolds number.

scholarly journals A Review of Passive Micromixers with a Comparative Analysis

Micromachines ◽  
2020 ◽  
Vol 11 (5) ◽  
pp. 455 ◽  
Author(s):  
Wasim Raza ◽  
Shakhawat Hossain ◽  
Kwang-Yong Kim
Keyword(s):  
Reynolds Number ◽  
Comparative Analysis ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Number Range ◽  
Pressure Drops ◽  
Convection Diffusion ◽  
Wide Range ◽  
Quantitative Analyses ◽  
Mixing Costs

A wide range of existing passive micromixers are reviewed, and quantitative analyses of ten typical passive micromixers were performed to compare their mixing indices, pressure drops, and mixing costs under the same axial length and flow conditions across a wide Reynolds number range of 0.01–120. The tested micromixers were selected from five types of micromixer designs. The analyses of flow and mixing were performed using continuity, Navier-Stokes and convection-diffusion equations. The results of the comparative analysis were presented for three different Reynolds number ranges: low-Re (Re ≤ 1), intermediate-Re (1 < Re ≤ 40), and high-Re (Re > 40) ranges, where the mixing mechanisms are different. The results show a two-dimensional micromixer of Tesla structure is recommended in the intermediate- and high-Re ranges, while two three-dimensional micromixers with two layers are recommended in the low-Re range due to their excellent mixing performance.

Velocity Field Measurements in Leading Edge Wing Compartments

2008 ◽  
Author(s):  
V. Egan ◽  
D. T. Newport ◽  
V. Larcarac ◽  
B. Estebe
Keyword(s):  
Natural Convection ◽  
Leading Edge ◽  
Field Measurements ◽  
Dominant Mode ◽  
Fluid Temperature ◽  
Velocity Measurements ◽  
Thermal Boundary Conditions ◽  
Single Compartment ◽  
Image Velocimetry ◽  
Convection Cooling

For many applications the optimisation of natural convection cooling is a major design consideration due to factors such as weight, accessibility, cost and power consumption. In aircraft wing compartments, natural convection is the dominant mode of heat transfer due to high wall temperatures resulting from solar loading and heat dissipating internal electronics. This paper investigates the flow structures in a leading edge compartment subject to various thermal boundary conditions. The experimental configuration consisted of two leading edge enclosures; the first is a single compartment while the second has an attached wing box. Particle image velocimetry (PIV) was employed to obtain velocity measurements of the flow in both leading edge enclosures. The second compartment investigated the effect of an adjacent fluid filled enclosure on the flow regime in the leading edge compartment. Higher local velocities were found in the second compartment due to an increase in buoyancy forces resulting from a lower of the average fluid temperature within the compartment. The introduction of a heat dissipating component gave rise to two separate convection structures and in general increased the fluctuations in the both temperature and velocities within the compartment.

Unsteady flow past a rotating circular cylinder at Reynolds numbers 103 and 104

1990 ◽  
Vol 220 ◽  
pp. 459-484 ◽  
Author(s):  
H. M. Badr ◽  
M. Coutanceau ◽  
S. C. R. Dennis ◽  
C. Ménard
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Unsteady Flow ◽  
Rotation Rate ◽  
Stokes Equations ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Number Range ◽  
Flow Past

The unsteady flow past a circular cylinder which starts translating and rotating impulsively from rest in a viscous fluid is investigated both theoretically and experimentally in the Reynolds number range 103 [les ] R [les ] 104 and for rotational to translational surface speed ratios between 0.5 and 3. The theoretical study is based on numerical solutions of the two-dimensional unsteady Navier–Stokes equations while the experimental investigation is based on visualization of the flow using very fine suspended particles. The object of the study is to examine the effect of increase of rotation on the flow structure. There is excellent agreement between the numerical and experimental results for all speed ratios considered, except in the case of the highest rotation rate. Here three-dimensional effects become more pronounced in the experiments and the laminar flow breaks down, while the calculated flow starts to approach a steady state. For lower rotation rates a periodic structure of vortex evolution and shedding develops in the calculations which is repeated exactly as time advances. Another feature of the calculations is the discrepancy in the lift and drag forces at high Reynolds numbers resulting from solving the boundary-layer limit of the equations of motion rather than the full Navier–Stokes equations. Typical results are given for selected values of the Reynolds number and rotation rate.

Numerical Investigation of the Flow in a Coaxial Piping System

2014 ◽  
Author(s):  
Charles Farbos de Luzan ◽  
Yuri Perelstein ◽  
Ephraim Gutmark ◽  
Thomas Frosell ◽  
Frederic Felten
Keyword(s):  
Flow Field ◽  
Turbulence Models ◽  
Field Measurements ◽  
Industrial Applications ◽  
Navier Stokes ◽  
Piping System ◽  
Image Velocimetry ◽  
Rans Models ◽  
Recirculation Zones ◽  
The One

A coaxial piping system (CPS) that involves a transition from a smaller annulus into a larger annulus is investigated to evaluate the generation of vortices and recirculation zones around the transition area. These areas are of interest for industrial applications where erosion within the piping system is a concern. The focus of this work is to evaluate the capabilities of Computational Fluid Dynamics (CFD) using commercial Reynolds-Averaged Navier Stokes (RANS) models to predict the regions and intensity of vortices and recirculation zones. A trusted grid is developed and used to compare turbulence models. The commercial CFD solver Fluent (Ansys Inc., USA) is used to solve the flow governing equations for different CFD numerical formulations, namely the one equation Spalart-Allmaras model, and steady-state RANS with different turbulence models (standard k-epsilon, k-epsilon realizable, k-epsilon RNG, standard k-omega, k-omega SST, and transition SST) [1]. CFD results are compared to time-averaged particle image velocimetry (PIV) measurements. The PIV provides 3D flow field measurements in the outer annulus of the piping system. Velocities in regions of interest were used to compare each model to the PIV results. An RMS comparison of the numerical results to the measured values is used as a quantitative evaluation of each turbulence model being considered. The results provide a useable CFD model for evaluation of the flow field of this flow field and highlights areas of uncertainty in the CFD results.

Experimental Analysis of Microchannel Entrance Length Characteristics Using Microparticle Image Velocimetry

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Tariq Ahmad ◽  
Ibrahim Hassan
Keyword(s):  
Reynolds Number ◽  
Flow Field ◽  
Entrance Region ◽  
Working Fluid ◽  
Parallel Plates ◽  
Entrance Length ◽  
Number Range ◽  
Micro Piv ◽  
Image Velocimetry ◽  
Microparticle Image Velocimetry

The study of the entrance region of microchannels and microdevices is limited, yet important, since the effect on the flow field and heat transfer mechanisms is significant. An experimental study has been carried out to explore the laminar hydrodynamic development length in the entrance region of adiabatic square microchannels. Flow field measurements are acquired through the use of microparticle image velocimetry (micro-PIV), a nonintrusive particle tracking and flow observation technique. With the application of micro-PIV, entrance length flow field data are obtained for three different microchannel hydraulic diameters of 500 μm, 200 μm, and 100 μm, all of which have cross-sectional aspect ratios of 1. The working fluid is distilled water, and velocity profile data are acquired over a laminar Reynolds number range from 0.5 to 200. The test-sections were designed as to provide a sharp-edged microchannel inlet from a very large reservoir at least 100 times wider and higher than the microchannel hydraulic diameter. Also, all microchannels have a length-to-diameter ratio of at least 100 to assure fully developed flow at the channel exit. The micro-PIV procedure is validated in the fully developed region with comparison to Navier–Stokes momentum equations. Good agreement was found with comparison to conventional entrance length correlations for ducts or parallel plates, depending on the Reynolds range, and minimal influence of dimensional scaling between the investigated microchannels was observed. New entrance length correlations are proposed, which account for both creeping and high laminar Reynolds number flows. These correlations are unique in predicting the entrance length in microchannels and will aid in the design of future microfluidic devices.

scholarly journals Prediction of the Propeller Performance at Different Reynolds Number Regimes with RANS

2021 ◽  
Vol 9 (10) ◽  
pp. 1115
Author(s):  
João Baltazar ◽  
Douwe Rijpkema ◽  
José Falcão de Campos
Keyword(s):  
Reynolds Number ◽  
Turbulence Model ◽  
Scale Effects ◽  
Open Water ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Transition Model ◽  
Sst Turbulence Model ◽  
Propeller Performance ◽  
Selection Of

In this study, a Reynolds averaged Navier-Stokes solver is used for prediction of the propeller performance in open-water conditions at different Reynolds numbers ranging from 104 to 107. The k−ω SST turbulence model and the γ−R˜eθt correlation-based transition model are utilised and results compared for a conventional marine propeller. First, the selection of the turbulence inlet quantities for different flow regimes is discussed. Then, an analysis of the iterative and discretisation errors is made. This work is followed by an investigation of the predicted propeller flow at variable Reynolds numbers. Finally, the propeller scale-effects and the influence of the turbulence and transition models on the performance prediction are discussed. The variation of the flow regime showed an increase in thrust and decrease in torque for increasing Reynolds number. From the comparison between the turbulence model and the transition model, different flow solutions are obtained for the Reynolds numbers between 105 and 106, affecting the scale-effects prediction.

Estimation of Aerodynamic Heating on Scramjet Inlets and Validation with Measurements

2021 ◽  
pp. 1-36
Author(s):  
Ram Prabhu M ◽  
Chakravarthy Balaji ◽  
Thirumalachari Sundararajan ◽  
Chacko M J
Keyword(s):  
Heat Flux ◽  
Navier Stokes ◽  
Aerodynamic Heating ◽  
Number Range ◽  
Flow Simulations ◽  
Long Duration ◽  
Standard Design ◽  
Flow Features ◽  
Flux Estimation ◽  
Energy Equations

Abstract Aerodynamic heating levels on a typical inlet configuration of a scramjet engine are estimated using both standard design correlations and numerical flow simulations. The stagnation point heat flux is estimated using the Fay and Riddell formula. Aerodynamic heating over the inclined ramps is estimated using the Van Driest method. Numerical flow simulations are carried out using a Reynolds Averaged Navier Stokes (RANS) solver coupled with energy equations and the Shear Stress Transport (SST) k-ω turbulence model. The aerodynamic heat flux estimates are validated with in-house measurements in a shock tunnel and for a scramjet flight experiment in the Mach number range 1.59 to 7.92. The emergence of a good agreement between them confirms the appropriateness of design correlations for heat flux estimation in scramjet inlets. The choice of simplification and appropriateness of design correlations to complex geometries demand critical assessment. Numerical flow simulations capture flow features and enable identification of potential augmented heating zones, which will be critical for long duration scramjet missions.

Numerical Study on the Flow Characteristics of the Francis Turbine With Various Blade Profiles

2013 ◽  
Author(s):  
J.-H. Jeon ◽  
S.-S. Byeon ◽  
Y.-J. Kim
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Francis Turbine ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Ansys Cfx ◽  
Commercial Code ◽  
Sst Turbulence Model

The Francis turbine is a kind of reaction turbines, which means that the potential energy of water converted to rotational kinetic energy. In this study, the flow characteristics have been investigated numerically in a Francis turbine on the 15 MW hydropower generation with various blade profiles (NACA 65 and NACA 16 series) and discharge angles (14°, 15°, 17°, and 18°), using the commercial code, ANSYS CFX. The k-ω SST turbulence model is employed in the Reynolds averaged Navier-Stokes equations. The computing domain includes the spiral casing, guide vanes, and draft tube, which are discretized with a full three-dimensional mesh system of unstructured tetrahedral shapes. The results showed that the change of blade profiles and discharge angles significantly influenced the performance of the Francis turbine.

Parametric Study of a Micromixer with Convergent-Divergent Sinusoidal Walls

2013 ◽  
Vol 479-480 ◽  
pp. 220-224
Author(s):  
Arshad Afzal ◽  
Kwang Yong Kim
Keyword(s):  
Reynolds Number ◽  
Parametric Study ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Geometrical Parameters ◽  
Number Range ◽  
Mixing Performance ◽  
Dean Vortices ◽  
Reynolds Number Range ◽  
Divergent Channel

A Parametric study of a passive micromixer with convergent-divergent channel walls of sinusoidal variation is conducted numerically using combined Navier-Stokes equations and convection-diffusion model for a Reynolds number range, 10 ≤ Re ≤ 70. Water and ethanol are used as working fluids for mixing analysis. Mixing performance was used to compare different configurations (layout) of the micromixer. In comparison with previously published design, which was based on Dean vortices in the sub-channels, the new configurations offered Dean vortices in the sub-channels and recirculation zones in the recesses of the channel for effective mixing. The proposed configurations are competitive in terms mixing performance and pressure loss. Finally, effect of two geometrical parameters viz. the ratio of throat-width to diameter of circular wall and the ratio of diameter of circular wall to amplitude, on mixing performance was studied over a chosen Reynolds number range.

Sign in / Sign up

Export Citation Format

Share Document