Experimental Investigation of Flow Over a Transversely Oscillating Square Cylinder at Intermediate Reynolds Number

2016 ◽  
Vol 138 (5) ◽  
Author(s):  
Manish Kumar Chauhan ◽  
Sushanta Dutta ◽  
Bhupendra Kumar Gandhi ◽  
Bhupendra Singh More
Keyword(s):  
Reynolds Number ◽  
Drag Coefficient ◽  
Reynolds Numbers ◽  
Wake Flow ◽  
Square Cylinder ◽  
Electromagnetic Actuators ◽  
Image Velocimetry ◽  
Oscillating Square Cylinder ◽  
Recirculation Length ◽  
Visualization Techniques

This paper presents an experimental study of flow over a square cylinder oscillating in transverse direction. The Reynolds number selected for present study is 485. Limited study has also been made for two other Reynolds numbers, namely, 295 and 775. The objective of the present study is to modify the near-wake flow structure using actuation of the cylinder for possible reduction in drag force. Transverse oscillations to the cylinder are provided using electromagnetic actuators. The flow field is investigated using two-dimensional (2D)-particle image velocimetry (PIV) system, hotwire anemometer (HWA), as well as flow visualization techniques. The effect of oscillation frequency and the amplitude on parameters like Strouhal number, drag coefficient, recirculation length, power spectrum, and Reynolds stress are studied. It is observed that the recirculation length is reduced significantly with increase in forcing frequency, and consequently drag coefficient is also reduced. For a constant forcing frequency, the vortex strength is reduced with the increase in the amplitude. Further, variation of instantaneous spanwise vorticity shows that separated shear length decreases with increase in forcing frequency. As a result, vortices are moved closer to the cylinder. These phenomena affect the forces acting on the cylinder. Lock-on is also observed at a frequency close to the vortex shedding frequency of the stationary cylinder.

scholarly journals Near-Wake Observations behind Azimuthally Perforated Disks With Varying Hole Layout and Porosity in Smooth Airstreams at High Reynolds Numbers

2018 ◽  
Vol 141 (5) ◽  
Author(s):  
Raf Theunissen ◽  
Robert Worboys
Keyword(s):  
Drag Coefficient ◽  
Experimental Studies ◽  
Reynolds Numbers ◽  
Wake Flow ◽  
Mean Flow ◽  
Flow Topology ◽  
Near Wake ◽  
Two Component ◽  
High Reynolds ◽  
Component Particle

Porous disks are commonly encountered in experimental studies dealing with flow through objects such as wind turbines, parachutes, and fluidic devices to regulate pressure and/or downstream turbulence. Perforations are typically staggered and only porosity is altered to attain the required disk drag coefficient, despite a documented influence of topology. Few works have reported, however, to which extent the spatial distribution of the circular perforations affect the mean flow pertaining freestanding disks, and for this reason, this work presents a first, more systematic study focused on the effect of azimuthally varying hole topology and porosity on disk drag and near-wake characteristics. An experimental study performed in airflows of negligible freestream turbulence at Reynolds numbers in the order of 105 is reported and related to the existing literature to ensure reliability. Complementary to drag measurements, near-wake surveys have been performed on a variety of perforation layouts using two-component laser Doppler velocimetry and two-component particle image velocimetry. It is shown that minor changes in perforations can cause drastic changes in near-wake flow topology and no perforation layout can be consistently associated with highest drag. Explicit empirical expressions for drag coefficient linked with the simplified topologies considered have been derived.

Measurement of Velocity Profiles of Laminar to Turbulent Water Flows in a Tube Using Particle Image Velocimetry

2004 ◽  
Author(s):  
Meredith R. Martin
Keyword(s):  
Reynolds Number ◽  
Particle Image Velocimetry ◽  
Particle Image ◽  
Glass Tube ◽  
Reynolds Numbers ◽  
Velocity Profiles ◽  
Reynolds Number Flow ◽  
Image Velocimetry ◽  
Dye Visualization ◽  
Number Flow

The transition from laminar to turbulent in-tube flow is studied in this paper. Water flow in a glass tube with an inside diameter of 21.7 mm was investigated by two methods. First, a dye visualization test using a setup similar to the 1883 experiment of Osborne Reynolds was conducted. For the dye visualization, Reynolds numbers ranging from approximately 1000 to 3500 were tested and the transition from laminar to turbulent flow was observed between Reynolds numbers of 2500 and 3500. For the second method, a particle image velocimetry (PIV) system was used to measure the velocity profiles of flow in the same glass tube at Reynolds numbers ranging from approximately 500 to 9000. The resulting velocity profiles were compared to theoretical laminar profiles and empirical turbulent power-law profiles. Good agreement was found between the lower Reynolds number flow and the laminar profile, and between the higher Reynolds number flow and turbulent power-law profile. In between the flow appeared to be in a transition region and deviated some between the two profiles.

Added Mass and In-Line Steady Drag Coefficient of Multiple Risers

1985 ◽  
Vol 107 (1) ◽  
pp. 2-11 ◽  
Author(s):  
T. Overvik ◽  
G. Moe
Keyword(s):  
Reynolds Number ◽  
Drag Coefficient ◽  
Reynolds Numbers ◽  
Added Mass ◽  
Central Cylinder ◽  
Lock In

Part of the results of an investigation with multiple rise configuration exposed to steady currents are presented. These tests were performed on smooth sectional riser models in a water flume at Reynolds numbers in the range 0.5 × 104 to 0.5 × 105. Reynolds number is based upon the diameter of the central cylinder (DC). Both the added mass, the frequency of vibration and the in-line steady drag coefficient are discussed both for vibration in the lock-in range and in the galloping mode.

Wake Interaction of a Square Cylinder With a Splitter Plate Boundary Layer at a Low Reynolds Number

2015 ◽  
Author(s):  
Smriti Srivastava ◽  
Sudipto Sarkar
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Bluff Body ◽  
Acoustic Noise ◽  
Vortex Formation ◽  
Plate Boundary ◽  
Wake Flow ◽  
Stream Velocity ◽  
Square Cylinder ◽  
Plate Length

One of the most important researches in bluff body aerodynamics is to control the shear layer evolution leading to vortex formation. This kind of research is closely associated with reduction of aerodynamics forces and acoustic noise. Passive and active control of wake-flow from bluff bodies have received a great deal of attention in the last few decades [1–4]. Keeping this in mind, authors investigate the interaction of a square cylinder (side of the square = a) wake with a flat plate (length L = a, width w = 0.1a) boundary layer positioned at various downstream locations close to the cylinder. The gap-to-side ratios are maintained at G/a = 0, 0.5, 1 and 2 (where G is the gap between square cylinder and plate), and the simulation is performed at a Reynolds number, Re = 100 (Re = U∞a/v, where U∞ is free stream velocity and v is kinematic viscosity). Instantaneous flow visualization, aerodynamic forces and vortex shedding frequencies for all cases are described to gain insight about the changes associated with wake of the cylinder when a short plate is kept in its downstream.

Flow past a transversely oscillating square cylinder in free stream at low Reynolds numbers

2009 ◽  
Vol 61 (6) ◽  
pp. 658-682 ◽  
Author(s):  
A. P. Singh ◽  
A. K. De ◽  
V. K. Carpenter ◽  
V. Eswaran ◽  
K. Muralidhar
Keyword(s):  
Free Stream ◽  
Reynolds Numbers ◽  
Square Cylinder ◽  
Low Reynolds Numbers ◽  
Flow Past ◽  
Low Reynolds ◽  
Oscillating Square Cylinder

Experimental Aerodynamic Characteristics of a Compound Wing in Ground Effect

2014 ◽  
Vol 136 (5) ◽  
Author(s):  
Saeed Jamei ◽  
Adi Maimun Abdul Malek ◽  
Shuhaimi Mansor ◽  
Nor Azwadi Che Sidik ◽  
Agoes Priyanto
Keyword(s):  
Reynolds Number ◽  
Drag Coefficient ◽  
Center Of Pressure ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Ground Effect ◽  
Reynolds Numbers ◽  
Aerodynamic Characteristics ◽  
Ground Clearance

Wing configuration is a parameter that affects the performance of wing-in-ground effect (WIG) craft. In this study, the aerodynamic characteristics of a new compound wing were investigated during ground effect. The compound wing was divided into three parts with a rectangular wing in the middle and two reverse taper wings with anhedral angle at the sides. The sectional profile of the wing model is NACA6409. The experiments on the compound wing and the rectangular wing were carried to examine different ground clearances, angles of attack, and Reynolds numbers. The aerodynamic coefficients of the compound wing were compared with those of the rectangular wing, which had an acceptable increase in its lift coefficient at small ground clearances, and its drag coefficient decreased compared to rectangular wing at a wide range of ground clearances, angles of attack, and Reynolds numbers. Furthermore, the lift to drag ratio of the compound wing improved considerably at small ground clearances. However, this improvement decreased at higher ground clearance. The drag polar of the compound wing showed the increment of lift coefficient versus drag coefficient was higher especially at small ground clearances. The Reynolds number had a gradual effect on lift and drag coefficients and also lift to drag of both wings. Generally, the nose down pitching moment of the compound wing was found smaller, but it was greater at high angle of attack and Reynolds number for all ground clearance. The center of pressure was closer to the leading edge of the wing in contrast to the rectangular wing. However, the center of pressure of the compound wing was later to the leading edge at high ground clearance, angle of attack, and Reynolds number.

scholarly journals The Effects of Reynolds Number on Energy Harvesting from FIV by a Square Cylinder

2020 ◽  
Vol 38 (5) ◽  
pp. 928-936
Author(s):  
Peng Han ◽  
Guang Pan ◽  
Qiaogao Huang ◽  
Yao SHI
Keyword(s):  
Reynolds Number ◽  
Energy Harvesting ◽  
Energy Conversion ◽  
Reynolds Numbers ◽  
Energy Conversion Efficiency ◽  
Published Data ◽  
Square Cylinder ◽  
A Value ◽  
Vibration Responses ◽  
Intense Vibration

Under the action of incoming flow, the square cylinder can generate more intense vibration responses than the circular cylinder, which is beneficial for energy harvesting. Numerical simulations for FIV of the square-cylinder energy conversion system are carried out. URANS equations are used in conjunction with the shear stress transport k-ω turbulence model to predict the flow, and the equations for vibrations are solved by the Newmark-β algorithm. The present numerical method is validated against the published data with good consistency. The Reduced velocity Ur is varied from 1-20, with corresponding Reynolds numbers of 24 000-160 000. The numerical results indicate that the Reynolds number significantly affects the frequency response, amplitude response, vortex shedding mode, and energy conversion efficiency. The highest efficiency point locates at Re=88 000, with a value of 7.156%. When Re>120 000, the system transits from vortex-induced vibration into galloping, and its vibration responses as well as energy harvesting characteristics change sharply. Fully developed galloping motion occurs when Re>144 000.

Simulation of Flow Around a Cube at Moderate Reynolds Numbers Using the Lattice Boltzmann Method

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Majid Hassan Khan ◽  
Atul Sharma ◽  
Amit Agrawal
Keyword(s):  
Reynolds Number ◽  
Drag Coefficient ◽  
Lattice Boltzmann Method ◽  
Steady Flow ◽  
Flow Regime ◽  
Lattice Boltzmann ◽  
Reynolds Numbers ◽  
Side Force ◽  
Force Coefficients ◽  
Boltzmann Method

Abstract This article reports flow behavior around a suspended cube obtained using three-dimensional (3D) lattice Boltzmann method (LBM)-based simulations. The Reynolds number (Re) range covered is from 84 to 770. Four different flow regimes are noted based on the flow structure in this range of Re: steady axisymmetric (84 ≤ Re ≤ 200), steady nonaxisymmetric (215 ≤ Re ≤ 250), unsteady nonaxisymmetric in one plane and axisymmetric in the other plane (276 ≤ Re ≤ 300), and unsteady nonaxisymmetric in streamwise orthogonal planes (339 ≤ Re ≤ 770). Recirculation length and drag coefficient follow inverse trend in the steady flow regime. The unsteady flow regime shows hairpin vortices for Re ≤ 300 and then it becomes structureless. The nature of force coefficients has been examined at various Reynolds numbers. Temporal behavior of force coefficients is presented along with phase dependence of side force coefficients. The drag coefficient decreases with increase in Reynolds number in the steady flow regime and the side force coefficients are in phase. Drag coefficients are compared with established correlations for flow around a cube and a sphere. The side force coefficients are perfectly correlated at Re = 215 and they are anticorrelated at Re = 250. At higher Reynolds numbers, side force coefficients are highly uncorrelated. This work adds to the existing understanding of flow around a cube reported earlier at low and moderate Re and extends it further to unsteady regime at higher Re.

Flow Around Three Side-by-Side Square Cylinders and the Effect of the Cylinder Oscillation

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Bhupendra Singh More ◽  
Sushanta Dutta ◽  
Bhupendra Kumar Gandhi
Keyword(s):  
Reynolds Number ◽  
Flow Field ◽  
Drag Coefficient ◽  
Flow Structure ◽  
Power Spectra ◽  
Square Cylinders ◽  
Spacing Ratio ◽  
Hotwire Anemometry ◽  
Visualization Techniques ◽  
Flow Interference

Abstract In this study, the flow field over three square cylinders (SCs) arranged side by side is investigated in a low-speed wind tunnel. The experiments are performed with three similar SCs for Reynolds number (Re) 295. The influences of spacing ratio on the wake size, drag coefficient, and flow interference of the cylinders are reported with the hotwire anemometry, particle image velocimetry (PIV), and the flow visualization techniques. Special attention is paid to the oscillation given to the middle cylinder and its effect on flow structure and related forces. The spacing ratio (s/D) ranges from 1.5 to 3, whereas the forcing frequency ratio ranges from 0.5 to 2 with amplitude of 10% of the cylinder width. It is observed that the spacing influences the flow structure, and the vortex shedding mechanism strongly. A secondary frequency appears in the flow field for spacing ratio s/D = 2 and 3. Depending upon the spacing ratios, the flow pattern is seen to be asymmetric biased, symmetric biased, and weakly interactive. The wake interaction decreases with increase in spacing ratios. With the oscillations, the wake becomes more unstable and complex. Additional wake oscillation frequency appears in the power spectra. With an increase in spacing ratios, the drag coefficient decreases, whereas with oscillations, higher drag force is observed compared to a stationary cylinder. A correlation is developed between the time-averaged drag coefficient with cylinder spacing and Reynolds number.

Sign in / Sign up

Export Citation Format

Share Document