High-Temperature Low-Cycle Fatigue Behavior of MarBN at 600 °C

2016 ◽  
Vol 138 (4) ◽  
Author(s):  
Richard A. Barrett ◽  
Eimear M. O'Hara ◽  
Padraic E. O'Donoghue ◽  
Sean B. Leen
Keyword(s):  
High Temperature ◽  
Low Cycle Fatigue ◽  
Kinematic Hardening ◽  
Fatigue Behavior ◽  
Strain Range ◽  
Material Model ◽  
Cyclic Softening ◽  
Cyclic Strength ◽  
Cycle Fatigue ◽  
Viscoplastic Material

This paper presents the high-temperature low-cycle fatigue (HTLCF) behavior of a precipitate strengthened 9Cr martensitic steel, MarBN, designed to provide enhanced creep strength and precipitate stability at high temperature. The strain-controlled test program addresses the cyclic effects of strain-rate and strain-range at 600 °C, as well as tensile stress-relaxation response. A recently developed unified cyclic viscoplastic material model is implemented to characterize the complex cyclic and relaxation plasticity response, including cyclic softening and kinematic hardening effects. The measured response is compared to that of P91 steel, a current power plant material, and shows enhanced cyclic strength relative to P91.

A Unified Viscoplastic Model for High Temperature Low Cycle Fatigue of Service-Aged P91 Steel

2014 ◽  
Vol 136 (2) ◽  
Author(s):  
R. A. Barrett ◽  
T. P. Farragher ◽  
C. J. Hyde ◽  
N. P. O'Dowd ◽  
P. E. O'Donoghue ◽  
...  
Keyword(s):  
High Temperature ◽  
Power Plants ◽  
Low Cycle Fatigue ◽  
Kinematic Hardening ◽  
Fatigue Behavior ◽  
Material Model ◽  
Cyclic Softening ◽  
Flow Rule ◽  
Cycle Fatigue ◽  
Hyperbolic Sine

The finite element (FE) implementation of a hyperbolic sine unified cyclic viscoplasticity model is presented. The hyperbolic sine flow rule facilitates the identification of strain-rate independent material parameters for high temperature applications. This is important for the thermo-mechanical fatigue of power plants where a significant stress range is experienced during operational cycles and at stress concentration features, such as welds and branched connections. The material model is successfully applied to the characterisation of the high temperature low cycle fatigue behavior of a service-aged P91 material, including isotropic (cyclic) softening and nonlinear kinematic hardening effects, across a range of temperatures and strain-rates.

A Unified Viscoplastic Model for High Temperature Low Cycle Fatigue of Service-Aged P91 Steel

2013 ◽  
Author(s):  
R. A. Barrett ◽  
P. E. O’Donoghue ◽  
S. B. Leen
Keyword(s):  
High Temperature ◽  
Low Cycle Fatigue ◽  
Kinematic Hardening ◽  
Material Model ◽  
Fatigue Behaviour ◽  
Cyclic Softening ◽  
Flow Rule ◽  
Strain Rates ◽  
Cycle Fatigue ◽  
Hyperbolic Sine

The finite element (FE) implementation of a hyperbolic sine unified cyclic viscoplasticity model is presented. The hyperbolic sine flow rule facilitates the identification of strain-rate independent material parameters for high temperature applications. This is important for the thermo-mechanical fatigue of power plant where a significant stress range is experienced during operational cycles and at stress concentration features, such as welds and branch connections. The material model is successfully applied to the characterisation of the high temperature low cycle fatigue behaviour of a service-aged P91 material, including isotropic (cyclic) softening and non-linear kinematic hardening effects, across a range of temperatures and strain-rates.

Constitutive Modeling of Haynes 230 for High Temperature Fatigue-Creep Interactions

2014 ◽  
Author(s):  
Paul R. Barrett ◽  
Raasheduddin Ahmed ◽  
Tasnim Hassan
Keyword(s):  
High Temperature ◽  
Nuclear Power ◽  
Low Cycle Fatigue ◽  
Kinematic Hardening ◽  
Model Development ◽  
Strain Range ◽  
Uniaxial Stress ◽  
Cycle Fatigue ◽  
Modeling Framework ◽  
Creep Fatigue

Non-linear stress analysis for high temperature cyclic viscoplasticity is increasingly becoming an important modeling framework for many industries. Simplified analyses are found to be insufficient in accurately predicting the life of components; such as a gas turbine engine of an airplane or the intermediate-heat exchanger of a nuclear power plant. As a result, advanced material models for simulating nonlinear responses at room to high temperature are developed and experimentally validated against a broad set of low-cycle fatigue responses; such as creep, fatigue, and their interactions under uniaxial stress states. . This study will evaluate a unified viscoplastic model based on nonlinear kinematic hardening (Chaboche type) with several added features of strain-range-dependence, rate-dependence, temperature-dependence, static recovery, and mean-stress-evolution for Haynes 230database. Simulation-based model development for isothermal creep-fatigue responses are all critically evaluated for the developed model. The robustness of the constitutive model is demonstrated and weaknesses of the model to accurately predict low-cycle fatigue responses are identified. Paper published with permission.

scholarly journals Stress-strain response in gears tooth root due to low cycle fatigue

2019 ◽  
Vol 287 ◽  
pp. 02002
Author(s):  
Marina Franulovic ◽  
Kristina Markovic ◽  
Zdravko Herceg
Keyword(s):  
Low Cycle Fatigue ◽  
Kinematic Hardening ◽  
Material Model ◽  
Strain Response ◽  
Tooth Root ◽  
Loading Conditions ◽  
Cycle Fatigue ◽  
Stress Strain ◽  
Main Research ◽  
Damage Initiation

Gears are mechanical components which experience high dynamic loading during their exploitation period. Therefore, their load carrying capacity together with life expectancy are often the main research interest in various studies. The research presented in this paper is focused on the materials response in spur gears tooth root, with the attention given to the repeated overloads during gears operation. In order to simulate low cycle fatigue by using numerical modeling of stress - strain relationship within material, the material model which takes into account isotropic and kinematic hardening is used here. Material response of specimens produced out of steel 42CrMo4 in different loading conditions is used for the calibration of material model, which is then applied to simulate damage initiation and materials stress - strain response in gears tooth root. The results show that materials response to the given loading conditions non-linearly change through the loading cycles.

High-temperature low-cycle fatigue behavior and microstructural evolution of an improved austenitic ODS steel

2018 ◽  
Vol 33 (12) ◽  
pp. 1814-1821 ◽  
Author(s):  
Ankur Chauhan ◽  
Dimitri Litvinov ◽  
Tim Gräning ◽  
Jarir Aktaa
Keyword(s):  
High Temperature ◽  
Microstructural Evolution ◽  
Low Cycle Fatigue ◽  
Fatigue Behavior ◽  
Cycle Fatigue ◽  
Ods Steel ◽  
Image Position

Abstract

Cyclic Softening Effect on Design Margin of JLF-1 Steel

2013 ◽  
Author(s):  
Huailin Li
Keyword(s):  
Elevated Temperature ◽  
Low Cycle Fatigue ◽  
Fatigue Behavior ◽  
Cyclic Softening ◽  
Fatigue Properties ◽  
Cycle Fatigue ◽  
Softening Effect ◽  
As Stress ◽  
Supercritical Water Cooled Reactor ◽  
Design Margin

A reduced-activation ferritic/martensitic (RAF/M) steel, JLF-1, is considered as one of the candidate structure material of the fusion reactors and supercritical water-cooled reactor (SCWR). Low cycle fatigue properties of JLF-1 steel at elevated temperature are the design base to provide adequate design margin against postulated mechanism that could experience during its design life, such as stress range, plastic deformation, and cyclic softening etc. However, the reduction in design margin is significant when the cyclic softening happens in cyclic deformation at RT, 673K, 873K. Thus, for the application as the structural materials, it is necessary to evaluate low cycle fatigue behavior and cyclic softening of JLF-1 steel at elevated temperature since those properties of material at elevated temperature are the key issue for design.

Multiaxial Low Cycle Fatigue Life Prediction at 300 °C Using Equivalent Strain Appoach

2011 ◽  
Vol 361-363 ◽  
pp. 1669-1672
Author(s):  
Wen Xiao Zhang ◽  
Guo Dong Gao ◽  
Guang Yu Mu
Keyword(s):  
Fatigue Life ◽  
Life Prediction ◽  
Low Cycle Fatigue ◽  
Fatigue Behavior ◽  
Strain Range ◽  
Cyclic Fatigue ◽  
Equivalent Strain ◽  
Multiaxial Fatigue ◽  
Fatigue Life Prediction ◽  
Cycle Fatigue

The low cycle fatigue behavior was experimentally studied with the 3-dimension notched LD8 aluminum alloy specimens at 300°C. The 3- dimension stress-strain responses of specimens were calculated by means of the program ADINA. The multiaxial fatigue life prediction was carried out according to von Mises’s equivalent theory. The results from the prediction showed that the equivalent strain range can be served as the valid mechanics for predicting multiaxial high temperature and low cyclic fatigue life.

Sign in / Sign up

Export Citation Format

Share Document