Three-Dimensional Blade-Stacking Strategies and Understanding of Flow Physics in Low-Pressure Steam Turbines—Part I: Three-Dimensional Stacking Mechanisms

2015 ◽  
Vol 138 (5) ◽  
Author(s):  
Said Havakechian ◽  
John Denton
Keyword(s):  
Guide Vane ◽  
Three Dimensional ◽  
Low Pressure ◽  
Stagnation Pressure ◽  
Steam Turbines ◽  
Wet Steam ◽  
Pressure Steam ◽  
Computational Fluid Dynamics Cfd ◽  
Last Stage ◽  
3D Stacking

Optimization of blade stacking in the last stage of low-pressure (LP) steam turbines constitutes one of the most delicate and time-consuming parts of the design process. This is the first of two papers focusing on the stacking strategies applied to the last stage guide vane (G0). Following a comprehensive review of the main features that characterize the LP last stage aerodynamics, the three-dimensional (3D) computational fluid dynamics (CFD) code used for the investigation and options related to the modeling of wet steam are described. Aerodynamic problems related to the LP last stage and the principles of 3D stacking are reviewed in detail. In this first paper, the results of a systematic study on an isolated LP stator row are used to elucidate the effects of stacking schemes, such as lean, twist, sweep, and hub profiling. These results show that stator twist not only has the most powerful influence on the reaction variation but it also produces undesirable spanwise variations in angular momentum at stator exit. These may be compensated by introducing a positive stagnation pressure gradient at entry to the last stage.

3D Blade Stacking Strategies and Understanding of Flow Physics in Low Pressure Steam Turbines: Part I — 3D Stacking Mechanisms

2015 ◽  
Author(s):  
Said Havakechian ◽  
John Denton
Keyword(s):  
Angular Momentum ◽  
Guide Vane ◽  
Low Pressure ◽  
Stagnation Pressure ◽  
Steam Turbines ◽  
Wet Steam ◽  
Comprehensive Review ◽  
Pressure Steam ◽  
Last Stage ◽  
3D Stacking

Optimization of blade stacking in the last stage of Low Pressure (LP) steam turbines constitutes one of the most delicate and time consuming parts of the design process. This is the first of two papers focusing on the stacking strategies applied to the last stage guide vane (G0). Following a comprehensive review of the main features that characterize the LP last stage aerodynamics, the 3D CFD code used for the investigation and options related to modeling of wet steam are described. Aerodynamic problems related to the LP last stage and the principles of 3D stacking are reviewed in detail. In this first paper the results of a systematic study on an isolated LP stator row are used to elucidate the effects of stacking schemes such as lean, twist, sweep and hub profiling. These results show that stator twist has the most powerful influence on the reaction variation but it also produces undesirable spanwise variations in angular momentum at stator exit. These may be compensated by introducing a positive stagnation pressure gradient at entry to the last stage.

Three-Dimensional Blade Stacking Strategies and Understanding of Flow Physics in Low-Pressure Steam Turbines—Part II: Stacking Equivalence and Differentiators

2015 ◽  
Vol 138 (6) ◽  
Author(s):  
Said Havakechian ◽  
John Denton
Keyword(s):  
Guide Vane ◽  
Three Dimensional ◽  
Low Pressure ◽  
Cfd Modeling ◽  
Steam Turbines ◽  
Flow Parameters ◽  
Pressure Steam ◽  
Computational Fluid Dynamics Cfd ◽  
Last Stage ◽  
Two Stages

Optimization of blade stacking in low-pressure (LP) steam turbine development constitutes one of the most delicate and time-consuming parts of the design process. This is the second part of two papers focusing on stacking strategies applied to the last stage guide vane and represents an attempt to discern the aerodynamic targets that can be achieved by each of the well-known and most often used basic stacking schemes. The effects of lean and twist have been investigated through an iterative process, involving comprehensive 3D computational fluid dynamics (CFD) modeling of the last two stages of a standard LP, where the basic lean and twist stacking schemes were applied on the last stage guide vanes while keeping the throat area (TA) unchanged. It has been found that it is possible to achieve the same target value and pattern of stage reaction by applying either tangential lean or an equivalent value of twist. Moreover, the significance of axial sweep on hub reaction has been found to become pronounced when the blade sweep is carried out at constant TA. The importance of hub-profiling has also been demonstrated and assessed. Detailed analysis of the flow fields has provided an overall picture, revealing the differences in the main flow parameters as produced by each of the alternative basic stacking schemes.

Sequential vs Multidisciplinary Coupled Optimization and Efficient Surrogate Modelling of a Last Stage and the Successive Axial Radial Diffuser in a Low Pressure Steam Turbine

2014 ◽  
Author(s):  
Kevin Cremanns ◽  
Dirk Roos ◽  
Arne Graßmann
Keyword(s):  
Steam Turbine ◽  
Design Process ◽  
Energy Demand ◽  
Three Dimensional ◽  
Flow Simulation ◽  
Low Pressure ◽  
Steam Turbines ◽  
Low Pressure Turbine ◽  
Pressure Steam ◽  
Last Stage

In order to meet the requirements of rising energy demand, one goal in the design process of modern steam turbines is to achieve high efficiencies. A major gain in efficiency is expected from the optimization of the last stage and the subsequent diffuser of a low pressure turbine (LP). The aim of such optimization is to minimize the losses due to separations or inefficient blade or diffuser design. In the usual design process, as is state of the art in the industry, the last stage of the LP and the diffuser is designed and optimized sequentially. The potential physical coupling effects are not considered. Therefore the aim of this paper is to perform both a sequential and coupled optimization of a low pressure steam turbine followed by an axial radial diffuser and subsequently to compare results. In addition to the flow simulation, mechanical and modal analysis is also carried out in order to satisfy the constraints regarding the natural frequencies and stresses. This permits the use of a meta-model, which allows very time efficient three dimensional (3D) calculations to account for all flow field effects.

Unsteady Wet-Steam Flows Through Low Pressure Turbine Final Three Stages Considering Blade Number

2015 ◽  
Author(s):  
Satoshi Miyake ◽  
Hironori Miyazawa ◽  
Satoru Yamamoto ◽  
Yasuhiro Sasao ◽  
Kazuhiro Momma ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Low Pressure ◽  
Numerical Results ◽  
Steam Turbines ◽  
Wet Steam ◽  
Flow Simulations ◽  
Low Pressure Turbine ◽  
Blade Number ◽  
Pressure Steam ◽  
Three Stages

Unsteady three-dimensional wet-steam flows through stator–rotor blade rows in the final three stages of a low-pressure steam turbine, taking the blade number into consideration, are numerically investigated. In ASME Turbo Expo 2014, we presented the numerical results of the unsteady flow assuming the same blade number. Here, this previous study is extended to flow simulations using the real blade number. The flows under three flow conditions, with and without condensation and considering the same and real blade numbers are simulated, and the numerical results are compared with each other and with the experimental results. Finally, the effect of the blade number on unsteady wet-steam flows in real low-pressure steam turbines is discussed.

3D Blade Stacking Strategies and Understanding of Flow Physics in Low Pressure Steam Turbines: Part II — Stacking Equivalence and Differentiators

2015 ◽  
Author(s):  
Said Havakechian ◽  
John Denton
Keyword(s):  
Iterative Process ◽  
Guide Vane ◽  
Low Pressure ◽  
Main Flow ◽  
Steam Turbines ◽  
Cfd Modelling ◽  
Flow Parameters ◽  
Pressure Steam ◽  
Last Stage ◽  
Two Stages

Optimization of blade stacking in Low Pressure (LP) steam turbine development constitutes one of the most delicate and time consuming parts of the design process. This is the second part of two papers focusing on stacking strategies applied to the last stage guide vane and represents an attempt to discern the aerodynamic targets that can be achieved by each of the well-known and most often used basic stacking schemes. The effects of lean and twist have been investigated through an iterative process, involving comprehensive 3D CFD modelling of the last two stages of a standard LP, where the basic lean and twist stacking schemes were applied on the last stage guide vanes whilst keeping the throat area unchanged. It has been found that it is possible to achieve the same target value and pattern of stage reaction by applying either tangential lean or an equivalent value of twist. Moreover, the significance of axial sweep on hub reaction has been found to become pronounced when the blade sweep is carried out at constant throat area. The importance of hub-profiling has also been demonstrated and assessed. Detailed analysis of the flow fields has provided an overall picture, revealing the differences in the main flow parameters as produced by each of the alternative basic stacking schemes.

A Methodology for a Detailed Loss Prediction in Low Pressure Steam Turbines

2017 ◽  
Author(s):  
Marius Grübel ◽  
Robin M. Dovik ◽  
Markus Schatz ◽  
Damian M. Vogt
Keyword(s):  
Boundary Layer ◽  
Evaluation Method ◽  
Three Dimensional ◽  
Low Pressure ◽  
Steam Turbines ◽  
Cfd Simulations ◽  
Depth Analysis ◽  
Pressure Steam ◽  
The Impact ◽  
Loss Mechanisms

An evaluation method for CFD simulations is presented, which allows an in-depth analysis of different loss mechanisms applying the approach of entropy creation proposed by Denton. The entropy creation within each single mesh element is determined based on the entropy flux through the cell faces and therefore the locations, where losses occur, can be identified clearly. By using unique features of the different loss mechanisms present in low pressure steam turbines, the losses are categorized into boundary layer, wake mixing and shock losses as well as thermodynamic wetness losses. The suitability of the evaluation method is demonstrated by means of steady state CFD simulations of the flow through a generic last stage of a low pressure steam turbine. The simulations have been performed on streamtubes extracted from three-dimensional simulations representing the flow at 10 % span. The impact of non-equilibrium steam effects on the overall loss composition of the stator passage is investigated by comparing the results to an equilibrium steam simulation. It is shown, that the boundary layer losses for the investigated case are of similar magnitude, but the shock and wake losses exhibit significant differences.

Aerodynamic Interaction Effects From Upstream and Downstream on the Down-Flow Type Exhaust Diffuser Performance in a Low Pressure Steam Turbine

2013 ◽  
Author(s):  
Tadashi Tanuma ◽  
Yasuhiro Sasao ◽  
Satoru Yamamoto ◽  
Yoshiki Niizeki ◽  
Naoki Shibukawa ◽  
...  
Keyword(s):  
Steam Turbine ◽  
Low Pressure ◽  
Interaction Effects ◽  
Wet Steam ◽  
Inlet Flow ◽  
Flow Type ◽  
Diffuser Flow ◽  
Aerodynamic Interaction ◽  
Pressure Steam ◽  
Last Stage

The purpose of this paper is to explain aerodynamic interaction effects from upstream and downstream on the down-flow type exhaust diffuser performance in a low pressure steam turbine. To increase exhaust diffuser performance, design data related to the aerodynamic interaction effects from upstream turbine stages and downstream exhaust hood geometry on the exhaust diffuser performance would be very useful. This paper presents numerical investigation of three dimensional wet steam flows in a down-flow type exhaust diffuser with non-uniform inlet flow from a typical last stage with long transonic blades designed with recent aerodynamic and mechanical design technology. Previous studies show that small scale model tests and CFD analyses of exhaust diffusers with uniform inlet flow conditions are not enough to investigate diffuser efficiency and detail diffuser flow mechanism because inlet flow structures including tip leakage flows and blade wakes superimposed from a last stage and several other upstream turbine stages in low pressure turbines affect flow separations that reduce the exhaust diffuser performance. Recent studies by the authors show that the introduction of radial distributions of velocities and flow angles at the inlet section of exhaust diffuser measured in a full scale development steam turbine increased the accuracy of numerical analysis of diffuser flow. In the present study, the computational domain was enhanced and the method of boundary condition definition was improved to increase the accuracy of boundary layer separation and separation vortex generation in wet steam flows. Using the improved method, the calculation results explained the aerodynamic interaction effects from upstream and downstream on the down-flow type exhaust diffuser performance.

Effect of Steam Injection on Last-Stage Blade Temperature of Low Pressure Steam Turbine at Low Volume Flow Condition

2017 ◽  
Author(s):  
Can Ma ◽  
Jun Wu ◽  
Yuansheng Lin
Keyword(s):  
Steam Turbine ◽  
Nuclear Power ◽  
Reverse Flow ◽  
Three Dimensional ◽  
Steam Injection ◽  
Low Pressure ◽  
Volume Flow ◽  
Pressure Steam ◽  
Last Stage ◽  
Low Volume

In the nuclear power plant, the last stage of the low pressure steam turbine is characterized by long blades. These long blades operate under severe working conditions with wet steam flow and strong mechanical stress. At the start up and shut down operating condition where the volume flow is extremely low, the last stage blades operate in ventilation conditions where there is significant reverse flow in the exhaust and the last stage. In such a condition, the reverse flow would cause significant increase in the blade temperature. In addition, the rotating reverse flow would increase the vibration of the rotor blade. Such temperature increase and enhanced vibration can cause blade damage and force the machine to be shut down. In previous work, the steam injection in the last stage has been proposed as a promising method to decrease the reverse flow at low volume flow conditions, which reduces the stall cell size in the last stage blade. This work investigates the effect of the steam injection process on the blade temperature distribution by conducting three-dimensional flow simulations. Various steam injection configurations are compared in this work and the major consideration to be noted in the design process is discussed.

Numerical and Experimental Aerodynamic Investigation of a Low Pressure Steam Turbine Module

2019 ◽  
Author(s):  
Juri Bellucci ◽  
Lorenzo Peruzzi ◽  
Andrea Arnone ◽  
Lorenzo Arcangeli ◽  
Nicola Maceli
Keyword(s):  
Steam Turbine ◽  
Three Dimensional ◽  
Low Pressure ◽  
Operating Conditions ◽  
Performance Estimation ◽  
Experimental Results ◽  
Steam Turbines ◽  
Performance Curves ◽  
Pressure Steam ◽  
Cfd Analyses

Abstract This work aims to deepen the understanding of the aerodynamic behavior and the performance of a low pressure steam turbine module. Numerical and experimental results obtained on a three-stage low pressure steam turbine (LPT) module are presented. The selected geometry is representative of the state-of-the-art of low pressure sections for small steam turbines. The test vehicle was designed and operated in different operating conditions with dry and wet steam. Different types of measurements are performed for the global performance estimation of the whole turbine and for the detailed analysis of the flow field. Steady and unsteady CFD analyses have been performed by means of viscous, three-dimensional simulations adopting a real gas, equilibrium steam model. Measured inlet/outlet boundary conditions are used for the computations. The fidelity of the computational setup is proven by comparing computational and experimental results. Main performance curves and span-wise distributions show a good agreement in terms of both shape of curves/distributions and absolute values. Finally, an attempt is done to point out where losses are generated and the physical mechanisms involved are investigated and discussed in details.

Sign in / Sign up

Export Citation Format

Share Document