An Evaluation Approach for the Stall Margin Enhancement With Stall Precursor-Suppressed Casing Treatment

2015 ◽  
Vol 137 (8) ◽  
Author(s):  
Dakun Sun ◽  
Xiaohua Liu ◽  
Xiaofeng Sun
Keyword(s):  
Quantitative Evaluation ◽  
Design Parameters ◽  
Extended Model ◽  
Stall Inception ◽  
Stall Margin ◽  
Casing Treatment ◽  
Evaluation Approach ◽  
Change Trend ◽  
Stall Precursor ◽  
Casing Treatments

It is known that a kind of stall precursor-suppressed (SPS) casing treatment can be used to enhance compressor stall margin (SM) without recognizable efficiency loss. The further requirement in this regard is to develop an effective way to determine the variation range of the SM improvement during the design of such SPS casing treatment. In this investigation, based on the extrapolation hypothesis and the existing work, an extended stall inception model for quantitative evaluation of the SM enhancement is presented for both subsonic and transonic compressors with the SPS casing treatment. The capability of the extended model to quantitatively evaluate the SM enhancement with the SPS casing treatment is validated against the experimental data. The quantitative evaluation results show that the SPS casing treatments with different geometric parameters can improve the SM by a diverse percentage. In particular, for the facilities used in the present investigation, the experiments show that the SPS casing treatments can cause relevant increases of the SM. The change trend of the SM enhancement with various design parameters of the SPS casing treatment is in line with the corresponding theoretical results.

Effect of Novel Casing Treatment on the Suppression of Stall Precursor in a Transonic Compressor

2014 ◽  
Author(s):  
Dakun Sun ◽  
Xiaofeng Sun ◽  
Xiaohua Liu ◽  
Feng Lin ◽  
Nie Chao Qun
Keyword(s):  
Perforated Plate ◽  
Area Ratio ◽  
Open Area ◽  
Stall Inception ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Stall Margin Improvement ◽  
Stall Precursor ◽  
Casing Treatments

A kind of novel casing treatment is proposed to realize stall margin enhancement by suppressing stall precursor in turbomachinery. In view of its different configuration and mechanism, such casing treatment is named as stall precursor-suppressed casing treatment in the present work, or SPS casing treatment for short. In the present work, the experiments of SPS casing treatment are conducted in a transonic compressor J69 Rotor/Stage. The SPS casing treatment which consists of a backchamber and a perforated plate is designed according to a proposed theoretical model. It is noted that the open area ratio of the casing treatment is only 4–12%, which is much smaller than traditional casing treatments with over 50% open area ratio. The tests show that the SPS casing treatment can improve the stall margin by 8–12% for J69 Rotor, and 4–12% for J69 Stage. Meanwhile, the mechanism of stall margin improvement with such casing treatment will be revealed in this investigation. Comparing with the evolution of the precursors without casing treatments, the propagation of the stall inception waves will be suppressed and the non-linear development of the stall process will be delayed under the casing treatment case.

Influencing Parameters of Tip Blowing Interacting With Rotor Tip Flow

2016 ◽  
Vol 139 (2) ◽  
Author(s):  
Cyril Guinet ◽  
André Inzenhofer ◽  
Volker Gümmer
Keyword(s):  
Geometric Model ◽  
Axial Compressor ◽  
Axial Flow ◽  
Navier Stokes ◽  
Axial Position ◽  
Design Parameters ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Casing Treatments

The design space of axial-flow compressors is restricted by stability issues. Different axial-type casing treatments (CTs) have shown their ability to enhance compressor stability and to influence efficiency. Casing treatments have proven to be effective, but there still is need for more detailed investigations and gain of understanding for the underlying flow mechanism. Casing treatments are known to have a multitude of effects on the near-casing 3D flow field. For transonic compressor rotors, these are more complex, as super- and subsonic flow regions alternate while interacting with the casing treatment. To derive design rules, it is important to quantify the influence of the casing treatment on the different tip flow phenomena. Designing a casing treatment in a way that it antagonizes only the deteriorating secondary flow effects can be seen as a method to enhance stability while increasing efficiency. The numerical studies are carried out on a tip-critical rotor of a 1.5-stage transonic axial compressor. The examined recirculating tip blowing casing treatment (TBCT) consists of a recirculating channel with an air off-take above the rotor and an injection nozzle in front of the rotor. The design and functioning of the casing treatment are influenced by various parameters. A variation of the geometry of the tip blowing, more specifically the nozzle aspect ratio, the axial position, or the tangential orientation of the injection port, was carried out to identify key levers. The tip blowing casing treatment is defined as a parameterized geometric model and is automatically meshed. A sensitivity analysis of the respective design parameters of the tip blowing is carried out on a single rotor row. Their impact on overall efficiency and their ability to improve stall margin are evaluated. The study is carried out using unsteady Reynolds-averaged Navier–Stokes (URANS) simulations.

Further Investigation on Transonic Compressor Stall Margin Enhancement With Stall Precursor-Suppressed Casing Treatment

2015 ◽  
Vol 138 (2) ◽  
Author(s):  
Dakun Sun ◽  
Chaoqun Nie ◽  
Xiaohua Liu ◽  
Feng Lin ◽  
Xiaofeng Sun
Keyword(s):  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Rotational Speed ◽  
Solid Wall ◽  
Stall Inception ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Stall Precursor

A kind of casing treatment, named as stall precursor-suppressed (SPS), has been developed recently, which was proved to be able to effectively improve stall margin (SM) without significant efficiency loss in low-speed axial flow compressors and a transonic compressor rotor. In this paper, the effectiveness of the SPS casing treatment is investigated in a single-stage transonic compressor. Based on an extended stall inception model, the quantitative evaluation of the SM enhancement by the SPS casing treatment is presented for the transonic compressor stage. The model predicts that a 2.5–6.8% of stall margin improvement (SMI), which is defined in terms of mass flow rate at stall inception, can be achieved at the design rotational speed. The experimental results show that the SPS casing treatment can achieve 3.5–9.3% of the SMI at 95% design rotational speed. Due to the fact that the distributions of the total pressure ratio along the spanwise direction are kept the same as those of the solid wall casing at the same mass flow rate, the SPS casing treatments with a small open area ratio and large backchamber enhance the SM without a recognizable efficiency loss and a migration of the pressure-rise characteristics. Furthermore, the mechanism of SMI with the SPS casing treatment is investigated in the experiments. In comparison with the solid wall casing, the emergence and the evolution of the stall inception waves are suppressed and the nonlinear development of the stall process is delayed with the SPS casing treatment.

Influencing Parameters of a Tip Blowing Interacting With Rotor Tip Flow

2015 ◽  
Author(s):  
Cyril Guinet ◽  
André Inzenhofer ◽  
Volker Gümmer
Keyword(s):  
Geometric Model ◽  
Axial Compressor ◽  
Axial Flow ◽  
Axial Position ◽  
Design Parameters ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Flow Phenomena ◽  
Casing Treatments

The design space of axial-flow compressors is restricted by stability issues. Different axial-type casing treatments have shown their ability to enhance compressor stability and to influence efficiency. Casing treatments have proven to be effective, but there still is need for more detailed investigations and gain of understanding for the underlying flow mechanism. Casing treatments are known to have a multitude of effects on the near-casing 3D flow field. For transonic compressor rotors these are more complex, as super- and subsonic flow regions alternate while interacting with the casing treatment. To derive design rules it is important to quantify the influence of the casing treatment on the different tip flow phenomena. Designing a casing treatment in a way that it antagonizes only the deteriorating secondary flow effects can be seen as a method to enhance stability while increasing efficiency. The numerical studies are carried out on a tip-critical rotor of a 1.5 stage transonic axial compressor. The examined recirculating tip blowing casing treatment, which consists of a recirculating channel with an air off-take above the rotor and an injection nozzle in front of the rotor. The design and functioning of the casing treatment is influenced by various parameters. A variation of the geometry of the tip blowing, more specifically the nozzle aspect ratio, the axial position or the tangential orientation of the injection port, was carried out to identify key levers. The tip blowing casing treatment is defined as a parameterized geometric model and is automatically meshed. A sensitivity analysis of the respective design parameters of the tip blowing is carried out on a single rotor row. Their impact on overall efficiency and their ability to improve stall margin is evaluated. The study is carried out using URANS simulations.

scholarly journals Axial Flow Compressor Stability Enhancement: Circumferential T-Shape Grooves Performance Investigation

Aerospace ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 12
Author(s):  
Marco Porro ◽  
Richard Jefferson-Loveday ◽  
Ernesto Benini
Keyword(s):  
Vortex Breakdown ◽  
Pressure Ratio ◽  
Axial Flow ◽  
Suction Side ◽  
Treatment Technique ◽  
Tip Leakage Flow ◽  
Stall Inception ◽  
Stall Margin ◽  
Casing Treatment ◽  
Stall Margin Improvement

This work focuses its attention on possibilities to enhance the stability of an axial compressor using a casing treatment technique. Circumferential grooves machined into the case are considered and their performances evaluated using three-dimensional steady state computational simulations. The effects of rectangular and new T-shape grooves on NASA Rotor 37 performances are investigated, resolving in detail the flow field near the blade tip in order to understand the stall inception delay mechanism produced by the casing treatment. First, a validation of the computational model was carried out analysing a smooth wall case without grooves. The comparisons of the total pressure ratio, total temperature ratio and adiabatic efficiency profiles with experimental data highlighted the accuracy and validity of the model. Then, the results for a rectangular groove chosen as the baseline case demonstrated that the groove interacts with the tip leakage flow, weakening the vortex breakdown and reducing the separation at the blade suction side. These effects delay stall inception, improving compressor stability. New T-shape grooves were designed keeping the volume as a constant parameter and their performances were evaluated in terms of stall margin improvement and efficiency variation. All the configurations showed a common efficiency loss near the peak condition and some of them revealed a stall margin improvement with respect to the baseline. Due to their reduced depth, these new configurations are interesting because they enable the use of a thinner light-weight compressor case as is desirable in aerospace applications.

Stability Enhancement by Casing Grooves: The Importance of Stall Inception Mechanism and Solidity

2010 ◽  
Author(s):  
Tim Houghton ◽  
Ivor Day
Keyword(s):  
Companion Paper ◽  
Rotor Blades ◽  
Stall Inception ◽  
Stall Margin ◽  
Casing Treatment ◽  
Stable Operating ◽  
Before And After ◽  
Stall Margin Improvement ◽  
Prediction Techniques ◽  
Stability Enhancement

This paper concerns the optimisation of casing grooves and the important influence of stall inception mechanism on groove performance. Installing casing grooves is a well known technique for improving the stable operating range of a compressor, but the wide-spread use of grooves is restricted by the loss of efficiency and flow capacity. In this paper, laboratory tests are used to examine the conditions under which casing treatment can be used to greatest effect. The use of a single casing groove was investigated in a recently published companion paper. The current work extends this to multiple-groove treatments and considers their performance in relation to stall inception mechanisms. Here it is shown that the stall margin gain from multiple grooves is less than the sum of the gains if the grooves were used individually. By contrast, the loss of efficiency is additive as the number of grooves increases. It is then shown that casing grooves give the greatest stall margin improvement when used in a compressor which exhibits spike-type stall inception, while modal activity before stall can dramatically reduce the effectiveness of the grooves. This finding highlights the importance of being able to predict the stall inception mechanism which might occur in a given compressor before and after grooves are added. Some published prediction techniques are therefore examined, but found wanting. Lastly, it is shown that casing grooves can, in some cases, be used to remove rotor blades and produce a more efficient, stable and light-weight rotor.

scholarly journals Flow mechanism of affecting an axial flow compressor performance and stability with cross-blade slot casing treatments

2018 ◽  
Vol 233 (1) ◽  
pp. 17-36 ◽  
Author(s):  
HaoGuang Zhang ◽  
XuDong Zhang ◽  
YanHui Wu ◽  
WuLi Chu ◽  
HaiYang Kuang
Keyword(s):  
Axial Flow ◽  
Low Energy ◽  
Peak Efficiency ◽  
Stall Margin ◽  
Casing Treatment ◽  
Flow Loss ◽  
Stall Margin Improvement ◽  
And Performance ◽  
Flow Compressor ◽  
Casing Treatments

The objective of this study is to evaluate the effect of cross-blade slot casing treatment on the stability and performance of an axial flow compressor rotor. The experimental and unsteady calculated results both show that cross-blade slot casing treatment can generate about 22% stall margin improvement, and the compressor peak efficiency is reduced by about 13%. The detailed flow-field analyses indicate that the sucked and injected flow caused by the slots of cross-blade slot casing treatment can restrain the rotor tip passage blockage, which is made by the low energy tip clearance leakage vortex. When cross-blade slot casing treatment is applied, not only the rotor wheel flange work becomes lower in most of the rotor blade span, but also the flow loss in the blade tip passage becomes fairly large due to the strong interaction between the mainstream and the injected flows made by the slots. As a result, the compressor total pressure ratio and efficiency for cross-blade slot casing treatment are reduced obviously. Three kinds of new cross-blade slot casing treatment were designed according to the previous successful experience and investigated in this paper. The numerical results show that the new three cross-blade slot casing treatments both generate about 54% stall margin improvement at the cost of minor peak efficiency. For one new cross-blade slot casing treatment (CSCT2), the compressor peak efficiency is reduced by about 0.3%. The low energy TLV, which is present for cross-blade slot casing treatment, is removed by the strong sucked flow made by CSCT2. Moreover, the interaction between the mainstream and the injected flows caused by CSCT2 becomes weak obviously, and the corresponding flow loss is reduced greatly. Hence, the compressor stability and performance with CSCT2 are higher than those with cross-blade slot casing treatment.

The Self-Induced Unsteadiness of Tip Leakage Vortex and Its Effect on Compressor Stall Inception

2007 ◽  
Author(s):  
Zhiting Tong ◽  
Feng Lin ◽  
Jingyi Chen ◽  
Chaoqun Nie
Keyword(s):  
The Self ◽  
Tip Leakage Vortex ◽  
Stall Inception ◽  
Stall Margin ◽  
Tip Vortices ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Power Spectral ◽  
Stall Precursor ◽  
Operating Points

The self-induced unsteadiness of tip leakage vortex (TLV), which appears in a compressor rotor working in a range of operating points on its characteristics, from wide-open throttle all the way to the stall limit, is investigated experimentally. The research aims are twofold, to clarify the three modes in TLV development process through experimental evidences and to explore the effect of this in-blade TLV unsteadiness on stall inception. In the first half of the paper, in order to detect the unsteadiness and ensure its existence in the experimental environment (not just in computational results), phase-locked Mean and Root-Mean-Square (RMS) contours are used to track the time-averaged trajectories of the TLV, while a power spectral density (PSD) analysis provides a means to identify the magnitude and the frequency of the oscillation. With all of the above, the three modes of the TLV development, which are steady, in-blade unsteady and cross-blade unsteady TLV, can be clearly demonstrated. In the second half of this paper, various tip jet injections are applied to test the effects of the unsteady TLV on stall inception. It is found that a spike stall precursor is originated from circumferential locations where the strongest unsteady TLV are. At those locations, tip jet injections that are designated to directly alter the characteristics of TLV improve the stall margin effectively. Further, the injections are arranged over the rotor tip in difference axial locations and switched on at different points of compressor characteristic, demonstrating that if the injection misses the tip vortices or interferes with TLV too late, little or even no improvement in stall margin can be gained. These results show that the unsteady TLV are closely related to spike stall inception in this single rotor, which implies that the initiation of compressor stall could be manipulated by properly altering the characteristics of TLV unsteadiness.

scholarly journals Stall Inception in a High-Speed Low Aspect Ratio Fan Including the Effects of Casing Treatments

1994 ◽  
Author(s):  
S. E. Gorrell ◽  
P. M. Russler
Keyword(s):  
Aspect Ratio ◽  
High Speed ◽  
Static Pressure ◽  
Pressure Ratio ◽  
Rotating Stall ◽  
Operating Conditions ◽  
Stall Inception ◽  
Casing Treatment ◽  
Low Aspect Ratio ◽  
Casing Treatments

The stall inception process in high-speed compressor components is important to understand in order to increase stage loading while maintaining stall margin. This paper presents the results of an in depth experimental investigation on the stall inception of a two stage, high-speed, low aspect ratio fan that is representative of current operational commercial and military fan technology. High-response static pressure measurements are presented which detail the stall inception process of the fan under various operating conditions. These conditions include: varied corrected speeds, a smooth case, a circumferential groove casing treatment, and a recirculating cavity casing treatment. Stage pressure characteristics and radial pressure ratio profiles are presented for the different operating conditions. The stage performance data, together with the static pressure data, are analyzed to provide a clear and thorough understanding of the stall inception process and how the process may vary under different conditions. Experimental results show that a stage may stall on the positive, neutral, or negative sloped part of the pressure characteristic. The three casing treatments had a significant effect on the rotor tip flow and these variations changed the stall inception path of the fan. Stall inception was characterized by the formation of a stall inception cell which grew to fully developed rotating stall. Properties affected by the changing tip flow include the stall inception duration, stall inception cell frequency, existence of modal waves, duration of modal waves, and modal wave frequency. In some instances modal waves appear to play a role in stall inception, in others they do not.

Optimization of Slots-Groove Coupled Casing Treatment for an Axial Transonic Compressor

2020 ◽  
Vol 142 (8) ◽  
Author(s):  
Guoming Zhu ◽  
Bo Yang
Keyword(s):  
Pareto Front ◽  
Leading Edge ◽  
Stall Margin ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Injection Flow ◽  
Optimization Stage ◽  
Stability Enhancement ◽  
Optimal Configurations ◽  
Casing Treatments

Abstract A multi-objective optimization of a coupled casing treatment (CCT) for an axial transonic compressor is performed in this study. The coupled casing treatment is the basis axial slots with a circumferential groove located at various positions along the slots. During the optimization stage, five important parameters to control the geometry are used as the optimal variables. The stall margin and the peak efficiency are selected as the optimal objectives. Non-dominated sorting genetic algorithm II coupled with radial basis function (RBF) approximation is used to search for Pareto-optimal solutions. Then, four optimal configurations are selected from Pareto-front for further analysis. As shown in the simulation results with and without the coupled casing treatments, the leakage flow is reenergized and the blocking region near the blade leading edge at rotor tip is decreased by the use of these structures under the low flowrate condition, which is the main reason for stability enhancement. Besides, a coupled casing treatment with the groove settled near the end of the basis slots have the potential to generate more injection flow and extend the operating range of compressor further.

Sign in / Sign up

Export Citation Format

Share Document