Integration of Genetic Programing With Genetic Algorithm for Correlating Heat Transfer Problems

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Yan Liu ◽  
Jian Yang ◽  
Jing Xu ◽  
Zhi-long Cheng ◽  
Qiu-wang Wang
Keyword(s):  
Heat Transfer ◽  
Genetic Algorithm ◽  
Heat Exchanger ◽  
Tube Heat Exchanger ◽  
Finned Tubes ◽  
Performance Of Heat Transfer ◽  
Heat Transfer Correlations ◽  
Predicted Values ◽  
Experimental Values ◽  
Transfer Problems

In the present paper, the genetic programing (GP) is integrated with the genetic algorithm (GA) for deriving heat transfer correlations. In the process of developing heat transfer correlations with the approach (GP with GA (GPA)), the GP is first employed to obtain some potential optimal forms. After that, the forms are further optimized with the global GA to reach minimum errors between the predicted values and experimental values. With the proposed approach, three typical different heat transfer problems are applied to the data reduction processes from published experimental data, which are heat transfer in a shell-and-tube heat exchanger (STHE) with continuous helical baffles, a single row heat exchanger with helically finned tubes and a finned oval-tube heat exchanger with double rows of tubes, respectively. The results indicate that the GPA approach could improve the performance of heat transfer correlations obtained with the GP. Compared with the power-law-based correlations, the heat transfer correlations obtained with the approach have higher predicted accuracies and more excellent robustness.

scholarly journals 3D Simulative Investigation of Heat Transfer Enhancement Using Three Vortex Generator Types Surrounding Tube in Plate Fin Heat Exchanger

2019 ◽  
Vol 130 ◽  
pp. 01027
Author(s):  
Stefan Mardikus ◽  
Petrus Setyo Prabowo ◽  
Vinsensius Tiara Putra ◽  
Made Wicaksana Ekaputra ◽  
Juris Burlakovs
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Vortex Generator ◽  
Vortex Generators ◽  
Pair Type ◽  
Tube Heat Exchanger ◽  
Performance Of Heat Transfer ◽  
Delta Winglet ◽  
The Heat Transfer Coefficient

Vortex generator is a method to enhancing of heat exchanger performance but still have some disadvantages when the heat transfer performance increase. One of the disadvantage using vortex generator is high pressure drop. This investigation will be compared three type vortex generators to result the overall performance of heat transfer around tube in plate fin heat exchanger. The three types of vortex generator to investigate are rectangular winglet type, delta winglet type, and trapezoidal winglet type in laminar flow. The result showed that using the kind of trapezoidal winglet pair type in the plate fin and tube heat exchanger consist of six rows of round tube with two neighboring fins form a channel better performance than two types vortex generators such as rectangular winglet type and delta winglet type. The heat transfer coefficient when use trapezoidal winglet type was increased almost same with rectangular winglet type and pressure drop was decreased more than delta winglet type.

The Variation in Effectiveness of Low-Finned Tubes Within a Shell-and-Tube Heat Exchanger for Supercritical CO2

2012 ◽  
Author(s):  
Patrick M. Fourspring ◽  
Joseph P. Nehrbauer
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Heat Exchanger ◽  
Thermal Conductance ◽  
Heat Transfer Area ◽  
Shell Side ◽  
Additional Heat ◽  
Tube Heat Exchanger ◽  
Finned Tubes ◽  
Shell And Tube

Low-finned tubes can be effective in baffled flow heat exchangers, if the heat transfer coefficients on either side of the heat exchanger differ greatly and therefore limit the thermal conductance of the heat exchanger. Low-finned tubes can increase thermal conductance by providing additional heat transfer area on the limiting side. The height and the spacing of the low-fins must be greater than the thickness of the thermal boundary layer on the low-finned side of the heat exchanger. Otherwise, the effectiveness of the additional area that the low-finned tubes provide will be reduced. The boundary layer thickness is dependent on the velocity and the thermophysical properties of the fluids. Therefore, in a standard shell-and-tube heat exchanger, the number of heat exchanger shell-side baffles needs to be properly considered to provide the correct shellside velocity without introducing too much pressure drop. Testing of a shell-and-tube heat exchanger containing low-finned tubes varied the flow rate and pressure of the supercritical CO2 on the shell side as water provided the cooling on the tube side. The testing maintained the temperature and pressure of the CO2 above the critical point in order to determine the changes in the effectiveness of the low-finned tubes and thus the heat transfer rate of the heat exchanger. The results show that the additional heat transfer area provided by the low-finned tubes will remain fully effective, even as the supercritical fluid nears its critical point or a pseudo-critical temperature. This result also supports (but is not sufficient to prove) the guidance to limit the estimated thickness of the thermal boundary layer to the fin height and twice the fin spacing to ensure the additional heat transfer area provided by the low-finned tubes remain effective.

Design optimization of a shell and tube heat exchanger with staggered baffles using neural network and genetic algorithm

2021 ◽  
pp. 095440622110057
Author(s):  
Kizhakke Kodakkattu Saijal ◽  
Thondiyil Danish
Keyword(s):  
Heat Transfer ◽  
Genetic Algorithm ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Orientation Angle ◽  
Design Parameters ◽  
Outer Diameter ◽  
Maximum Heat ◽  
Tube Heat Exchanger ◽  
Shell And Tube

A shell and tube heat exchanger with staggered baffles (STHX-ST) is designed by integrating the features of both segmental and helical baffles, which produces a helical flow in the shell side. This work studies the effect of different parameters on the performance of the STHX-ST through numerical analysis. Shell inner diameter, tube outer diameter, baffle cut, baffle spacing, and baffle orientation angle are the design parameters. Multi-objective optimization using genetic algorithm (GA) is carried out to maximize the heat transfer rate while minimizing the pressure drop. The objective functions for optimization are approximated using artificial neural networks (ANNs). The training data for ANNs are simulated from CFD analysis as per the Taguchi orthogonal test table. The optimal solution obtained from the Pareto front has a maximum heat transfer of 154555 W for a minimum pressure drop of 88083.86 Pa.

scholarly journals Design and Analysis of Air-Cooled Fin and Tube Heat Exchanger with Smaller Diameter Micro Finned Tubes using R32 in Replacement of R410A

2019 ◽  
Vol 8 (2) ◽  
pp. 2485-2489 ◽  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Transfer Coefficient ◽  
Ozone Depletion ◽  
Air Conditioning ◽  
Tube Heat Exchanger ◽  
Finned Tubes ◽  
Ozone Depletion Potential ◽  
Depletion Potential

Difluoromethane (HFC32) is the perfect replacement of R410A due to its zero ozone depletion Potential and lower Global warming potential (GWP as 675) that is much less than R410A (2088) and Zero Ozone Depletion Potential. R32 refrigerant can achieve higher heat transfer coefficients with less quantity of refrigerant charge when compared to R410A. Fin and Tube heat exchangers (FTHE) are widely used in the refrigeration, air conditioning industries and in many other applications to exchange or transfer the heat from refrigerant or working fluid and to the sink. The aim of this paper is to calculate the Heat transfer coefficient, pressure drop and heat load of refrigerants in Air-cooled Fin and Tube heat exchanger. Here FTHE is used as a condenser in one TR residential air conditioning application and their comparison using R32 and R410A refrigerants. To study the behaviour of two refrigerants in liquid phase, two phase (liquid and vapor phase) and vapor phases inside the condenser. Here the airflow to the condenser is counter flow. Materials used were Aluminium for fins and copper for tubes to achieve greater heat transfer coefficient. Here fin and tube material combination is very important because of their material properties. Optimizing the design of FTHE, i.e. selecting the micro finned tubes to generate turbulence in refrigerant flow, which results in enhancement of heat transfer coefficient. Slit type fin is selected for fins. The micro finned copper tubes with smaller inner diameter can save the material cost. Coil Designer a simulation software used for the design and analysis of FTHE

scholarly journals Experimental investigation on straight and u-bend double tube heat exchanger with active and passive enhancement methods

2018 ◽  
Vol 240 ◽  
pp. 02001 ◽  
Author(s):  
Rafal Andrzejczyk ◽  
Tomasz Muszynski ◽  
Przemysław Kozak
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Experimental Models ◽  
Transfer Coefficients ◽  
Pressure Drops ◽  
Tube Heat Exchanger ◽  
Heat Transfer Efficiency ◽  
Air Blowing ◽  
Experimental Values ◽  
Water Mass Flow Rate

Authors in this work want to demonstrate the possibility to increase the heat transfer efficiency by using simple wire coil inserts to create turbulent flow in the boundary layer as well as air blowing into the annulus of the pipe. In the study, Wilson plot approach was applied in order to estimate heat transfer coefficients for all heat exchanger (HX) configurations. The study focuses on experimental values of heat transfer coefficient (HTC) and pressure drops. The primary objectives of the work are to: I. Provide an experimental comprehensive database for HTC and pressure drops; II. Analysis effect of different flow conditions e.g. water mass flow rate, the void fraction on heat transfer and hydraulic performance of tested elements. III. Compare influences of both passive and active methods at the efficiency of simple heat exchangers constructions; IV. Validation experimental results with selected experimental models from the open literature.

Genetic Algorithm Based Design and Optimization of an Outer-Fins and Inner-Fins Tube Heat Exchanger

2007 ◽  
Author(s):  
G. N. Xie ◽  
M. Zeng ◽  
Q. W. Wang
Keyword(s):  
Heat Transfer ◽  
Genetic Algorithm ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Annual Cost ◽  
Total Annual Cost ◽  
Geometrical Parameters ◽  
Tube Heat Exchanger ◽  
Design And Optimization ◽  
Extended Surfaces

One of passive enhancement techniques, Extended Surfaces, are commonly employed in many heat exchangers to enlarge the heat transfer area on gases side because of the low heat transfer coefficients, which may be 10 to 100 times smaller than those of liquids side. The use of extended surfaces (or referred to as finned surfaces) will reduce the thermal resistance of gases side. Enhanced heat transfer coefficient will be achieved by using the basic surface geometries: plate-fin and tube-fin. With respect to the tube-fin type heat exchanger, fins may be employed outside tubes (herein called outer-fins) to enhance the heat transfer of shell-side, and alternatively fins may be also employed inside tubes (herein called inner-fins) to increase the intensity of heat transfer of tube-side. The desire to accomplish the gas-to-gas heat exchange through the tubular heat exchangers will lead to develop heat transfer enhancement techniques for outside and inside tubes. Therefore based on integration with such two mechanisms, namely, outer-fins and inner-fins of enhancement heat transfer techniques, a kind of outer-fins and inner-fins tube heat exchanger has been preliminary proposed (ASME-IGTI, Paper No.2006-90260 [20]). Such heat exchanger is potentially used in gas-to-gas heat exchangers, especially used for highpressure operating conditions, where the plate-fin heat exchangers might not be applicable. In general, the design task is a complex trial-and-error process and there is always the possibility that the design results such as geometrical parameters are not the optimum. Therefore, the motivation of this paper is to conduct optimum designs of such heat exchanger (hereafter called Outer-Fins and Inner-Fins tube Heat Exchanger, OFIF HE). A computational intelligent technique, Genetic Algorithm (GA) is applied to search and optimize geometrical parameters of the OFIF HE. The minimum total volume or minimum total annual cost of such OFIF HE is taken as an objective function in the GA respectively. The results show that the optimized OFIF HE provides lower total volume or lower total annual cost than those presented in previous work. The method is universal and may be used for design and optimization of OFIF HEs under different specified duties and design objectives.

scholarly journals Mechanical Engg Dept. National Institute of Technology;Silchar, Silchar, India

2011 ◽  
pp. 77-83
Author(s):  
Apu Roy ◽  
D.H.Das Das
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Waste Heat ◽  
Finned Tube ◽  
Heat Transfer Fluid ◽  
Tube Heat Exchanger ◽  
Finned Tube Heat Exchanger ◽  
Institute Of Technology ◽  
Experimental Values ◽  
Energy Conversion Devices

The energy available in the exit stream of many energy conversion devices such as I.C engine gas turbine etc goes as waste, if not utilized properly. The present work has been carried out with a view to predicting the performance of a shell and finned tube heat exchanger in the light of waste heat recovery application. The performance of the heat exchanger has been evaluated by using the CFD package fluent 6.3.16 and has been compared with the available experimental values. An attempt has also been made to predict the performance of the above heat exchanger by considering different heat transfer fluid and the result so obtained have been compared. The performance parameters pertaining to heat exchanger such as effectiveness, overall heat transfer coefficient, energy extraction rate etc, have been reported in this work.

Sign in / Sign up

Export Citation Format

Share Document