A Piecewise-Linear Approximation of the Canonical Spring-Loaded Inverted Pendulum Model of Legged Locomotion

Author(s):  
Zhuohua Shen ◽  
Justin Seipel

Here, we introduce and analyze a novel approximation of the well-established and widely used spring-loaded inverted pendulum (SLIP) model of legged locomotion, which has made several validated predictions of the center-of-mass (CoM) or point-mass motions of animal and robot running. Due to nonlinear stance equations in the existing SLIP model, many linear-based systems theories, analytical tools, and corresponding control strategies cannot be readily applied. In order to provide a significant simplification in the use and analysis of the SLIP model of locomotion, here we develop a novel piecewise-linear, time-invariant approximation. We show that a piecewise-linear system, with the only nonlinearity due to the switching event between stance and flight phases, can predict all the bifurcation features of the established nonlinear SLIP model over the entire three-dimensional model parameter space. Rather than precisely fitting only one particular solution, this approximation is made to quantitatively approximate the entire solution space of the SLIP model and capture all key aspects of solution bifurcation behavior and parametric sensitivity of the original SLIP model. Further, we provide an entirely closed-form solution for the stance trajectory as well as the system states at the end of stance, in terms of common functions that are easy to code and compute. Overall, the closed-form solution is found to be significantly faster than numerical integration when implemented using both matlab and c++. We also provide a closed-form analytical stride map, which is a Poincaré return section from touchdown (TD) to next TD event. This is the simplest closed-form approximate stride mapping yet developed for the SLIP model, enabling ease of analysis and numerical coding, and reducing computational time. The approximate piecewise-linear SLIP model presented here is a significant simplification over previous SLIP-based models and could enable more rapid development of legged locomotion theory, numerical simulations, and controllers.

Author(s):  
Zhuohua Shen ◽  
Justin Seipel

Although legged locomotion is better at tackling complicated terrains compared with wheeled locomotion, legged robots are rare, in part, because of the lack of simple design tools. The dynamics governing legged locomotion are generally nonlinear and hybrid (piecewise-continuous) and so require numerical simulation for analysis and are not easily applied to robot designs. During the past decade, a few approximated analytical solutions of Spring-Loaded Inverted Pendulum (SLIP), a canonical model in legged locomotion, have been developed. However, SLIP is energy conserving and cannot predict the dynamical stability of real-world legged locomotion. To develop new analytical tools for legged robot designs, we first analytically solved SLIP in a new way. Then based on SLIP solution, we developed an analytical solution of a hip-actuated Spring-Loaded Inverted Pendulum (hip-actuated-SLIP) model, which is more biologically relevant and stable than the canonical energy conserving SLIP model. The analytical approximations offered here for SLIP and the hip actuated-SLIP solutions compare well with the numerical simulations of each. The analytical solutions presented here are simpler in form than those resulting from existing analytical approximations. The analytical solutions of SLIP and the hip actuated-SLIP can be used as tools for robot design or for generating biological hypotheses.


Author(s):  
Zhuohua Shen ◽  
Justin Seipel

A reduced model of legged locomotion, called the Spring Loaded Inverted Pendulum (SLIP) has previously been developed to predict the dynamics of locomotion. However, due to energy conservation, the SLIP model can only be partially asymptotically stable in the center-of-mass velocity. The more recently developed Clock-Torqued Spring Loaded Inverted Pendulum (CT-SLIP) model is fully asymptotically stable, and has a significantly larger stability basin than SLIP, but requires more than twice as many parameters. To more completely explore the parameter space and understand the reason for improved stability, we develop and analyze a further reduced model called the Forced-Damped Spring Loaded Inverted Pendulum (FD-SLIP) model.


Author(s):  
Zhuohua Shen ◽  
Justin Seipel

The concept of passive dynamic walking and running [5] has demonstrated that a simple passive model can represent the dynamics of whole-body human locomotion. Since then, many passive models were developed and studied: [3,1,2,11]. The later developed Spring-Loaded Inverted Pendulum (SLIP) [1, 4, 11, 2] exhibits stable center of mass (CoM) motions just by resetting the landing angle at each touch down. Also, compared to SLIP, a SLIP-like model with simple flight leg control is better at resisting perturbations of the angle of velocity but not the magnitude [11, 2, 7]. Energy conserving models explain much about whole-body locomotion. Recently, there has been investigations of modified spring-mass models capable of greater stability, like that of animals and robots [9, 10, 8, 12]. Inspired by RHex [6], the Clock-Torqued Spring-Loaded Inverted Pendulum (CT-SLIP) model [9] was developed, and has been used to explain the robust stability of animal locomotion [12]. Here we present a model (mechanism) simpler than CT-SLIP called Forced-Damped SLIP (FD-SLIP) that can attain full asymptotically stability of the CoM during locomotion, and is capable of both walking and running motions. The FD-SLIP model, having fewer parameters, is more accessible and easier to analyze for the exploration and discovery of principles of legged locomotion.


1993 ◽  
Vol 115 (1) ◽  
pp. 25-32 ◽  
Author(s):  
R. M. Alexander ◽  
S. T. Noah ◽  
C. G. Franck

An analytical and experimental investigation of a vibratory system with a clearance was conducted. A finite element model and an equivalent single-degree-of-freedom closed-form solution were used to determine the dynamic parameters and response of an experimental structure interacting with a gap. The closed-form solution is obtained by taking advantage of the piecewise linearity of the system. Results from these solution methods are in agreement with experimental data. The results also suggest that the closed-form solution approximates the response of the experimental structure with accuracy greater than that of the finite element model. The closed-form solution was also used to determine the gap size of the structure. The parameter identification procedure utilized in this study appears to be simple to use and can be readily extended to other types of piecewise-linear multi-degree-of-freedom systems.


Author(s):  
Richard M. Alexander ◽  
Sherif T. Noah ◽  
Charles G. Franck

Abstract An analytical and experimental investigation of a vibratory system with a clearance was conducted. A finite element model and an equivalent single degree of freedom closed-form solution were used to determine the dynamic parameters and response of an experimental structure interacting with a gap. The closed-form solution is obtained by taking advantage of the piecewise linearity of the system. Results from these solution methods are in agreement with experimental data. The results also suggest that the closed-form solution approximates the response of the experimental structure with accuracy greater than that of the finite element model. The closed-form solution was also used to determine the gap size of the structure. The parameter identification procedure utilized in this study appears to be simple to use and can be readily extended to other types of piecewise-linear multidegree of freedom systems.


Author(s):  
Peter Larson ◽  
Justin Seipel

Recent locomotion models have demonstrated the benefits of hip torques on legged locomotion stability. Here, a simple constant radial forcing function along the leg of the Spring-Loaded Inverted Pendulum (SLIP) model is added. This model is analyzed in order to determine what effect such a radial force might have on the stability of locomotion versus the more commonly used hip-torque forcing. The model is found to be unstable for the vast majority of the parameter space studied, for any amount of added forcing and damping constants. This suggests that simple constant forcing along the leg does not produce stable locomotion, unlike the case where forcing happens via hip torque.


2013 ◽  
Vol 40 (2) ◽  
pp. 106-114
Author(s):  
J. Venetis ◽  
Aimilios (Preferred name Emilios) Sideridis

Sign in / Sign up

Export Citation Format

Share Document