Ambient Temperature Operation of a Platinum-Free Direct Formate Fuel Cell

2015 ◽  
Vol 12 (1) ◽  
Author(s):  
Tien Q. Nguyen ◽  
Daniel Minami ◽  
Chau Hua ◽  
Austin Miller ◽  
Kevin Tran ◽  
...  
Keyword(s):  
High Temperature ◽  
Fuel Cell ◽  
Low Temperature ◽  
Ambient Temperature ◽  
Power Density ◽  
Second Generation ◽  
Cathode Catalyst ◽  
Maximum Power Density ◽  
Direct Formate Fuel Cell ◽  
Fuel Stream

Several reports have been made recently of the direct formate fuel cell (DFFC) operating at high-temperature and using Pt cathode catalyst. In the present work, we demonstrate a Pt-free DFFC employing ACTA HypermecTM 4020 Fe–Co second-generation cathode catalyst operating at low-temperature. We report a maximum power density (PD) of 45 mW cm−2 at ambient temperature (20 °C), when the fuel stream was 1 M HCOOK and 2 M KOH with oxygen used at the cathode. When air was used at the cathode, the maximum PD was 35 mW cm−2. When hydroxide was removed from the fuel stream and oxygen used at the cathode, the maximum PD at 20 °C was 18 mW cm−2. This low-temperature, KOH-free operation is important to development of a practical DFFC.

Hydrocarbon Fueled Operation of Metal-Supported Solid Oxide Fuel Cell

2010 ◽  
Author(s):  
Jihoon Jeong ◽  
Seung-Wook Baek ◽  
Joongmyeon Bae
Keyword(s):  
High Temperature ◽  
Fuel Cell ◽  
Solid Oxide Fuel Cell ◽  
Power Density ◽  
Solid Oxide ◽  
Maximum Power ◽  
Oxide Fuel ◽  
Maximum Power Density ◽  
Operating Characteristics ◽  
Synthetic Gas

The metal-supported solid oxide fuel cell (SOFC) was studied. Hydrocarbon fueled operation was used to make SOFC system. Different operating characteristics for metal-supported SOFC are used than for conventional ones. Metal-supported SOFC was successfully fabricated by a high temperature sinter-joining method and the cathode was in-situ sintered. Synthetic gas, which is compounded as the diesel reformate gas composition and low hydrocarbons was completely removed by the diesel reformer. Metal-supported SOFC with synthetic gas was operated and evaluated and its characteristics analyzed. The performance of hydrogen operation shows 0.4 W·cm−2 of maximum power density. The maximum power density of the synthetic gas operation decreased to 0.22 W·cm−2 and to 0.11 W·cm−2 after 10 hours operation, respectively. Degradation occurred because a large steam quantity made an oxidation atmosphere at high temperature, causing the metallic part damage.

Preparation of Ce0.8Sm0.2O1.9 Thin Films by Electrophoretic Deposition and their Fuel Cell Performance

2013 ◽  
Vol 566 ◽  
pp. 137-140 ◽  
Author(s):  
Hiroki Ichiboshi ◽  
Kenichi Myoujin ◽  
Takayuki Kodera ◽  
Takashi Ogihara
Keyword(s):  
Thin Films ◽  
Fuel Cell ◽  
Spray Pyrolysis ◽  
Power Density ◽  
Electrophoretic Deposition ◽  
Open Circuit Voltage ◽  
Open Circuit ◽  
Doped Ceria ◽  
Maximum Power Density ◽  
Fuel Cell Performance

Ce0.8Sm0.2O1.9 (Samaria-doped ceria: SDC) precursors were synthesized by carbon-assisted spray pyrolysis. SDC thin films were prepared by electrophoretic deposition using the SDC precursor particles. The as-prepared SDC thin films were sintered at 1600 °C for 10 h. Uniform films with a thickness of approximately 20 μm were obtained. A fuel cell using the prepared thin films showed a maximum power density of 60.6 mW/cm2 and an open circuit voltage (OCV) of 0.63 V at 700 °C.

Low-Temperature Operating Micro Solid Oxide Fuel Cells with Perovskite-type Proton Conductors

2011 ◽  
Vol 1330 ◽  
Author(s):  
Hiroo Yugami ◽  
Kensuke Kubota ◽  
Yu Inagaki ◽  
Fumitada Iguchi ◽  
Shuji Tanaka ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Low Temperature ◽  
Solid Oxide Fuel Cells ◽  
Power Density ◽  
Proton Conductors ◽  
Solid Oxide ◽  
Maximum Power ◽  
Barium Zirconate ◽  
Oxide Fuel ◽  
Maximum Power Density

ABSTRACTMicro-solid oxide fuel cells (Micro-SOFCs) with yttrium-doped barium zirconate (BZY) and strontium and cobalt-doped lanthanum scandate (LSScCo) electrolytes were fabricated for low-temperature operation at 300 °C. The micro-SOFC with a BZY electrolyte could operate at 300 °C with an open circuit voltage (OCV) of 1.08 V and a maximum power density of 2.8 mW/cm2. The micro-SOFC with a LSScCo electrolyte could operate at 370 °C; its OCV was about 0.8 V, and its maximum power density was 0.6 mW/cm2. Electrochemical impedance spectroscopy revealed that the electrolyte resistance in both the micro-SOFCs was lower than 0.1 Ωcm2, and almost all of the resistance was due to anode and cathode reactions. Although the obtained maximum power density was not sufficient for practical applications, improvement of electrodes will make these micro-SOFCs promising candidates for power sources of mobile electronic devices.

A Model for High-Temperature PEM Fuel Cell: The Role of Transport in the Cathode Catalyst Layer

Fuel Cells ◽  
2012 ◽  
Vol 12 (4) ◽  
pp. 577-582 ◽  
Author(s):  
O. Shamardina ◽  
A. A. Kulikovsky ◽  
A. V. Chertovich ◽  
A. R. Khokhlov
Keyword(s):  
High Temperature ◽  
Fuel Cell ◽  
Catalyst Layer ◽  
Pem Fuel Cell ◽  
Cathode Catalyst ◽  
Cathode Catalyst Layer ◽  
High Temperature Pem

scholarly journals Energy Harvesting from Sugarcane Bagasse Juice using Yeast Microbial Fuel Cell Technology

REAKTOR ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 52-58
Author(s):  
Marcelinus Christwardana ◽  
Linda Aliffia Yoshi ◽  
J. Joelianingsih
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Sugarcane Bagasse ◽  
Current Density ◽  
Sugar Content ◽  
Maximum Power ◽  
Biofuel Cell ◽  
Maximum Power Density ◽  
Menten Constant

This study demonstrates the feasibility of producing bioelectricity utilizing yeast microbial fuel cell (MFC) technology with sugarcane bagasse juice as a substrate. Yeast Saccharomyces cerevisiae was employed as a bio-catalyst in the production of electrical energy. Sugarcane bagasse juice can be used as a substrate in MFC yeast because of its relatively high sugar content. When yeast was used as a biocatalyst, and Yeast Extract, Peptone, D-Glucose (YPD) Medium was used as a substrate in the MFC in the acclimatization process, current density increased over time to reach 171.43 mA/m2 in closed circuit voltage (CCV), maximum power density (MPD) reached 13.38 mW/m2 after 21 days of the acclimatization process. When using sugarcane bagasse juice as a substrate, MPD reached 6.44 mW/m2 with a sugar concentration of about 5230 ppm. Whereas the sensitivity, maximum current density (Jmax), and apparent Michaelis-Menten constant (𝐾𝑚𝑎𝑝𝑝) from the Michaelis-Menten plot were 0.01474 mA/(m2.ppm), 263.76 mA/m2, and 13594 ppm, respectively. These results indicate that bioelectricity can be produced from sugarcane bagasse juice by Saccharomyces cerevisiae.Keywords: biomass valorization, biofuel cell, acclimatization, maximum power density, Michaelis-Menten constant

A New Type of High Temperature Membrane for Proton Exchange Membrane Fuel Cells

2006 ◽  
Author(s):  
Jinjun Shi ◽  
Jiusheng Guo ◽  
Bor Jang
Keyword(s):  
High Temperature ◽  
Fuel Cell ◽  
Low Temperature ◽  
Proton Exchange Membrane ◽  
Carbon Monoxide Poisoning ◽  
Pem Fuel Cell ◽  
Proton Exchange ◽  
Membrane Material ◽  
New Type ◽  
Exchange Membrane

The proton exchange membrane (PEM) fuel cell operated at high temperature is advantageous than the current low temperature PEM fuel cell, in that high temperature operation promotes electro-catalytic reaction, reduces the carbon monoxide poisoning, and possibly eliminates methanol crossover in Direct Methanol Fuel Cell (DMFC). However, current commercially viable membranes for PEMFC and DMFC, such as the de-facto standard membrane of Dupont Nafion membrane, only work well at temperatures lower than 80°C. When it is operated at temperatures of higher than 80°C, especially more than 100°C, the fuel cell performance degrades dramatically due to the dehydration. Therefore, high temperature proton exchange membrane material is now becoming a research and development focus in fuel cell industry. In this paper, a new type of high temperature PEM membrane material was investigated. This new type of membrane material was optimally selected from polyether ether ketone (PEEK)-based materials, poly (phthalazinon ether sulfone ketone) (PPESK). The performance of the sulfonated PPESK membrane with degree of sulfonation (DS) of 93% was studied and compared to that of Nafion (®Dupont) 117 membrane. The result showed SPPESK has a comparable performance to Nafion (®Dupont) 117 at low temperature (<80°C) and better performance at high temperature (>80°C). The other advantage of SPPESK is that it has much lower cost than that of Nafion. These characteristics make SPPESK an attractive candidate for high temperature proton exchange membrane material.

Air-Breathing Membraneless Laminar Flow Fuel Cell With Flow-Through Anode

2011 ◽  
Author(s):  
Seyed Ali Mousavi Shaegh ◽  
Nam-Trung Nguyen ◽  
Siew Hwa Chan
Keyword(s):  
Fuel Cell ◽  
Laminar Flow ◽  
Power Density ◽  
Maximum Power Density ◽  
Reference Case ◽  
Higher Power ◽  
Flow Through ◽  
Fabrication And Characterization ◽  
Porous Anode

This paper reports the fabrication and characterization of a new concept of flow-through anode for membraneless laminar flow fuel cell (LFFC). To establish a reference case, a fuel cell with flow over and planar anode was fabricated as well. Experimental results indicated that maximum power density was improved from 17 mW/cm2 in planar design to 23 mW/cm2 using the flow-through design. The higher power density of flow-through design is an indicative of higher fuel utilization in the porous anode. Images of the flow obtained experimentally showed that mixing was reduced at the liquid-liquid interface in the channel with flow-through anode leading to increased fuel concentration over anode.

Sign in / Sign up

Export Citation Format

Share Document