scholarly journals The Role of Contact Line (Pinning) Forces on Bubble Blockage in Microchannels

2015 ◽  
Vol 137 (3) ◽  
Author(s):  
Mahshid Mohammadi ◽  
Kendra V. Sharp
Keyword(s):  
Contact Line ◽  
Contact Angle Hysteresis ◽  
Thin Liquid Film ◽  
External Pressure ◽  
Working Fluid ◽  
Dry Bubble ◽  
Contact Line Pinning ◽  
First Time ◽  
Capillary Pressure Gradient

This paper highlights the influence of contact line (pinning) forces on the mobility of dry bubbles in microchannels. Bubbles moving at velocities less than the dewetting velocity of liquid on the surface are essentially dry, meaning that there is no thin liquid film around the bubbles. For these “dry” bubbles, contact line forces and a possible capillary pressure gradient induced by pinning act on the bubbles and resist motion. Without sufficient driving force (e.g., external pressure), a dry bubble is brought to stagnation. For the first time, a bipartite theoretical model that estimates the required pressure difference across the length of stagnant bubbles with concave and convex back interfaces to overcome the contact line forces and stimulate motion is proposed. To validate our theory, the pressure required to move a single dry bubble in square microchannels exhibiting contact angle hysteresis has been measured. The working fluid was de-ionized water. The experiments have been conducted on coated glass channels with different surface hydrophilicities that resulted in concave and convex back interfaces for the bubbles. The experimental results were in agreement with the model's predictions for square channels. The predictions of the concave and convex back models were within 19% and 27% of the experimental measurements, respectively.

Anomalous Contact Angle Hysteresis of a Captive Bubble: Advancing Contact Line Pinning

Langmuir ◽  
2011 ◽  
Vol 27 (11) ◽  
pp. 6890-6896 ◽  
Author(s):  
Siang-Jie Hong ◽  
Feng-Ming Chang ◽  
Tung-He Chou ◽  
Seong Heng Chan ◽  
Yu-Jane Sheng ◽  
...  
Keyword(s):  
Contact Angle ◽  
Contact Line ◽  
Contact Angle Hysteresis ◽  
Contact Line Pinning

A Study of an Oscillating Corner Meniscus With Phase Change Using Image Analyzing Interferometry

Volume 4 ◽  
2004 ◽  
Author(s):  
Sashidhar S. Panchamgam ◽  
Shripad J. Gokhale ◽  
Joel L. Plawsky ◽  
Sunando DasGupta ◽  
Peter C. Wayner
Keyword(s):  
Fluid Flow ◽  
Phase Change ◽  
Contact Line ◽  
Quartz Substrate ◽  
Thin Liquid Film ◽  
Adsorbed Film ◽  
Line Region ◽  
The Stability ◽  
First Time

The thickness and curvature profiles in the contact line region of a moving evaporating thin liquid film of pentane on a quartz substrate were measured for the thickness region, δ < 2.5 microns. The critical region, δ < 0.1 microns, was emphasized. The profiles were obtained using image analyzing interferometry and an improved data analysis procedure. The precursor adsorbed film, the thickness, the curvature, and interfacial slope (variation of the local “apparent contact angle”) profiles were consistent with previous models based on interfacial concepts. Isothermal equilibrium conditions were used to evaluate the Hamaker constant in-situ and to verify the accuracy of the procedures. The profiles give fundamental insights into the phenomena of phase change, pressure gradient, fluid flow, spreading, and the physics of interfacial phenomena in the contact line region. The experimental results demonstrate explicitly for the first time, with microscopic detail, that the disjoining pressure controls fluid flow within an evaporating completely wetting thin curved film and the stability of the thin film. The change in the thickness of the adsorbed film with time is demonstrated for the first time.

Experimental Determination of the Effect of Disjoining Pressure on Shear in the Contact Line Region of a Moving Evaporating Thin Film

2005 ◽  
Vol 127 (3) ◽  
pp. 231-243 ◽  
Author(s):  
Sashidhar S. Panchamgam ◽  
Shripad J. Gokhale ◽  
Joel L. Plawsky ◽  
Sunando DasGupta ◽  
Peter C. Wayner,
Keyword(s):  
Fluid Flow ◽  
Contact Line ◽  
Quartz Substrate ◽  
Thin Liquid Film ◽  
Disjoining Pressure ◽  
Dispersion Constant ◽  
Line Region ◽  
Fundamental Insight ◽  
First Time

The thickness and curvature profiles in the contact line region of a moving evaporating thin liquid film of pentane on a quartz substrate were measured for the thickness region, δ<2.5 μm. The critical region, δ<0.1 μm, was emphasized. The profiles were obtained using image-analyzing interferometry and an improved data analysis procedure. The precursor adsorbed film, the thickness, the curvature, and interfacial slope (variation of the local “apparent contact angle”) profiles were consistent with previous models based on interfacial concepts. Isothermal equilibrium conditions were used to verify the accuracy of the procedures and to evaluate the retarded dispersion constant in situ. The profiles give fundamental insight into the phenomena of phase change, pressure gradient, fluid flow, spreading, shear stress, and the physics of interfacial phenomena in the contact line region. The experimental results demonstrate explicitly, for the first time with microscopic detail, that the disjoining pressure controls fluid flow within an evaporating completely wetting thin curved film.

LATTICE BOLTZMANN SIMULATIONS OF CONTACT LINE PINNING

2007 ◽  
Vol 18 (04) ◽  
pp. 595-601 ◽  
Author(s):  
XINLI JIA ◽  
J. B. MCLAUGHLIN ◽  
G. AHMADI ◽  
K. KONTOMARIS
Keyword(s):  
Contact Angle ◽  
Contact Line ◽  
Lattice Boltzmann ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Contact Lines ◽  
Lattice Boltzmann Simulations ◽  
Spatially Periodic ◽  
Contact Line Pinning ◽  
Geometrical Defects

Contact angle hysteresis is caused by contact line pinning by geometrical and/or chemical non-uniformities on a solid surface. For small contact angles, theories have been developed for the pinning of contact angles, and an analogy between geometrical and chemical defects has been established. This paper presents LBM results for the interaction of a contact line with a spatially periodic array of chemical defects. The results are for finite contact angles. Qualitative comparisons with existing theories for chemical defects and experimental results for geometrical defects are made for pinned contact lines.

Psychological Resilience Provides No Independent Protection From Suicidal Risk

Crisis ◽  
2016 ◽  
Vol 37 (2) ◽  
pp. 130-139 ◽  
Author(s):  
Danica W. Y. Liu ◽  
A. Kate Fairweather-Schmidt ◽  
Richard Burns ◽  
Rachel M. Roberts ◽  
Kaarin J. Anstey
Keyword(s):  
Risk Factors ◽  
Well Being ◽  
Current Status ◽  
Psychological Resilience ◽  
Cross Sectional ◽  
Life Project ◽  
Resilience Factors ◽  
First Time

Abstract. Background: Little is known about the role of resilience in the likelihood of suicidal ideation (SI) over time. Aims: We examined the association between resilience and SI in a young-adult cohort over 4 years. Our objectives were to determine whether resilience was associated with SI at follow-up or, conversely, whether SI was associated with lowered resilience at follow-up. Method: Participants were selected from the Personality and Total Health (PATH) Through Life Project from Canberra and Queanbeyan, Australia, aged 28–32 years at the first time point and 32–36 at the second. Multinomial, linear, and binary regression analyses explored the association between resilience and SI over two time points. Models were adjusted for suicidality risk factors. Results: While unadjusted analyses identified associations between resilience and SI, these effects were fully explained by the inclusion of other suicidality risk factors. Conclusion: Despite strong cross-sectional associations, resilience and SI appear to be unrelated in a longitudinal context, once risk/resilience factors are controlled for. As independent indicators of psychological well-being, suicidality and resilience are essential if current status is to be captured. However, the addition of other factors (e.g., support, mastery) makes this association tenuous. Consequently, resilience per se may not be protective of SI.

Synergetic Theory of Document in Evolution of Document Science

2018 ◽  
pp. 1060-1068
Author(s):  
Galina A. Dvoenosova ◽  
Keyword(s):  
Social Role ◽  
Scientific Study ◽  
Self Organization ◽  
Universal Theory ◽  
Social Self ◽  
Social Goal ◽  
The Social ◽  
Synergetic Theory ◽  
First Time

The article assesses synergetic theory of document as a new development in document science. In information society the social role of document grows, as information involves all members of society in the process of documentation. The transformation of document under the influence of modern information technologies increases its interest to representatives of different sciences. Interdisciplinary nature of document as an object of research leads to an ambiguous interpretation of its nature and social role. The article expresses and contends the author's views on this issue. In her opinion, social role of document is incidental to its being a main social tool regulating the life of civilized society. Thus, the study aims to create a scientific theory of document, explaining its nature and social role as a tool of social (goal-oriented) action and social self-organization. Substantiation of this idea is based on application of synergetics (i.e., universal theory of self-organization) to scientific study of document. In the synergetic paradigm, social and historical development is seen as the change of phases of chaos and order, and document is considered a main tool that regulates social relations. Unlike other theories of document, synergetic theory studies document not as a carrier and means of information transfer, but as a unique social phenomenon and universal social tool. For the first time, the study of document steps out of traditional frameworks of office, archive, and library. The document is placed on the scales with society as a global social system with its functional subsystems of politics, economy, culture, and personality. For the first time, the methods of social sciences and modern sociological theories are applied to scientific study of document. This methodology provided a basis for theoretical vindication of nature and social role of document as a tool of social (goal-oriented) action and social self-organization. The study frames a synergetic theory of document with methodological foundations and basic concepts, synergetic model of document, laws of development and effectiveness of document in the social continuum. At the present stage of development of science, it can be considered the highest form of theoretical knowledge of document and its scientific explanatory theory.

Physical Warmth Attenuates Ethnocentric Bias under Mortality Salience: An Embodied Terror Management Perspective

2020 ◽  
Author(s):  
Armand Chatard ◽  
Margaux Renoux ◽  
Jean Monéger ◽  
Leila Selimbegovic
Keyword(s):  
Mortality Salience ◽  
Terror Management ◽  
Negative Consequences ◽  
Defensive Reaction ◽  
Worldview Defense ◽  
Management Perspective ◽  
Physical Warmth ◽  
Alternative Means ◽  
First Time

Research indicates that individuals often deal with mortality salience by affirming beliefs in national or cultural superiority (worldview defense). Because worldview defense may be associated with negative consequences (discrimination), it is important to identify alternative means to deal with death-related thoughts. In line with an embodied terror management perspective, we evaluate for the first time the role of physical warmth in reducing defensive reaction to mortality salience. We predicted that, like social affiliation (social warmth), physical warmth could reduce worldview defense when mortality is salient. In this exploratory (preregistered) study, 202 French participants were primed with death-related thoughts, or an aversive control topic, in a heated room or a non-heated room. The main outcome was worldview defense (ethnocentric bias). We found no main effect of mortality salience on worldview defense. However, physical warmth reduced worldview defense when mortality was salient. Implications for an embodied terror management perspective are discussed.

Sign in / Sign up

Export Citation Format

Share Document