Investigation of Hydrogen Enriched Natural Gas Flames in a SGT-700/800 Burner Using OH PLIF and Chemiluminescence Imaging

2014 ◽  
Vol 137 (3) ◽  
Author(s):  
Andreas Lantz ◽  
Robert Collin ◽  
Marcus Aldén ◽  
Annika Lindholm ◽  
Jenny Larfeldt ◽  
...  
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Flame Front ◽  
Gas Turbines ◽  
Dynamic Pressure ◽  
Pressure Fluctuations ◽  
Burner Exit ◽  
Planar Laser ◽  
Industrial Gas Turbines ◽  
Dynamic Pressure Measurements

The effect of hydrogen enrichment to natural gas flames was experimentally investigated at atmospheric pressure conditions using flame chemiluminescence imaging, planar laser-induced fluorescence of hydroxyl radicals (OH PLIF), and dynamic pressure monitoring. The experiments were performed using a third generation dry low emission (DLE) burner used in both SGT-700 and SGT-800 industrial gas turbines from Siemens. The burner was mounted in an atmospheric combustion test rig at Siemens with optical access in the flame region. Four different hydrogen enriched natural gas flames were investigated; 0 vol. %, 30 vol. %, 60 vol. %, and 80 vol. % of hydrogen. The results from flame chemiluminescence imaging and OH PLIF show that the size and shape of the flame was clearly affected by hydrogen addition. The flame becomes shorter and narrower when the amount of hydrogen is increased. For the 60 vol. % and 80 vol. % hydrogen flames the flame has moved upstream and the central recirculation zone that anchors the flame has moved upstream the burner exit. Furthermore, the position of the flame front fluctuated more for the full premixed flame with only natural gas as fuel than for the hydrogen enriched flames. Measurements of pressure drop over the burner show an increase with increased hydrogen in the natural gas despite same air flow thus confirming the observation that the flame front moves upstream toward the burner exit and thereby increasing the blockage of the exit. Dynamic pressure measurements in the combustion chamber wall confirms that small amounts of hydrogen in natural gas changes the amplitude of the dynamic pressure fluctuations and initially dampens the axial mode but at higher levels of hydrogen an enhancement of a transversal mode in the combustion chamber at higher frequencies could occur.

Investigation of Hydrogen Enriched Natural Gas Flames in a SGT-700/800 Burner Using OH PLIF and Chemiluminescence Imaging

2014 ◽  
Author(s):  
Andreas Lantz ◽  
Robert Collin ◽  
Marcus Aldén ◽  
Annika Lindholm ◽  
Jenny Larfeldt ◽  
...  
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Flame Front ◽  
Gas Turbines ◽  
Dynamic Pressure ◽  
Pressure Fluctuations ◽  
Burner Exit ◽  
Planar Laser ◽  
Industrial Gas Turbines ◽  
Dynamic Pressure Measurements

The effect of hydrogen enrichment to natural gas flames was experimentally investigated at atmospheric pressure conditions using flame chemiluminescence imaging, planar laser-induced fluorescence of hydroxyl radicals (OH PLIF) and dynamic pressure monitoring. The experiments were performed using a 3rd generation dry low emission (DLE) burner used in both SGT-700 and SGT-800 industrial gas turbines from Siemens. The burner was mounted in an atmospheric combustion test rig at Siemens with optical access in the flame region. Four different hydrogen enriched natural gas flames were investigated; 0 vol.%, 30 vol.%, 60 vol.% and 80 vol.% of hydrogen. The results from flame chemiluminescence imaging and OH PLIF show that the size and shape of the flame was clearly affected by hydrogen addition. The flame becomes shorter and narrower when the amount of hydrogen is increased. For the 60 vol.% and 80 vol.% hydrogen flames the flame has moved upstream and the central recirculation zone that anchors the flame has moved upstream the burner exit. Furthermore, the position of the flame front fluctuated more for the full premixed flame with only natural gas as fuel than for the hydrogen enriched flames. Measurements of pressure drop over the burner show an increase with increased hydrogen in the natural gas despite same air flow thus confirming the observation that the flame front moves upstream towards the burner exit and thereby increasing the blockage of the exit. Dynamic pressure measurements in the combustion chamber wall confirms that small amounts of hydrogen in natural gas changes the amplitude of the dynamic pressure fluctuations and initially dampens the axial mode but at higher levels of hydrogen an enhancement of a transversal mode in the combustion chamber at higher frequencies could occur.

Investigation of Ozone Stimulated Combustion in the SGT-800 Burner at Atmospheric Conditions

2016 ◽  
Author(s):  
Andreas Lantz ◽  
Jenny Larfeldt ◽  
Andreas Ehn ◽  
Jiajian Zhu ◽  
Arman Ahamed Subash ◽  
...  
Keyword(s):  
Natural Gas ◽  
Gas Turbines ◽  
Dynamic Pressure ◽  
Atmospheric Conditions ◽  
Combustion Chemistry ◽  
Low Emission ◽  
Planar Laser ◽  
Industrial Gas Turbines ◽  
Flame Region ◽  
Center Axis

The effect of ozone (O3) in a turbulent, swirl-stabilized natural gas/air flame was experimentally investigated at atmospheric pressure conditions using planar laser-induced fluorescence imaging of formaldehyde (CH2O PLIF) and dynamic pressure monitoring. The experiment was performed using a dry low emission (DLE) gas turbine burner used in both SGT-700 and SGT-800 industrial gas turbines from Siemens. The burner was mounted in an atmospheric combustion test rig at Siemens with optical access in the flame region. CH2O PLIF imaging was carried out for four different seeding gas compositions and seeding injection channel configurations. Two seeding injection-channels were located around the burner tip while the other two were located along the center axis of the burner at different distances upstream the burner outlet. Four different seeding gas compositions were used: nitrogen (N2), oxygen (O2) and two ozone/oxygen (O3/O2) mixtures with different O3 concentration. The results show that the O3 clearly affects the combustion chemistry. The natural gas/air mixture is preheated before combustion which is shown to kick-start the cold combustion chemistry where O3 is highly involved. The CH2O PLIF signal increases with O3 seeded into the flame which indicates that the pre-combustion activity increases and that the cold chemistry starts to develop further upstream. The small increase of the pressure drop over the burner shows that the flame moves upstream when O3 is seeded into the flame, which confirms the increase in pre-combustion activity.

Design Analysis of a Micro Gas Turbine Combustion Chamber Burning Natural Gas

2012 ◽  
Author(s):  
André Perpignan V. de Campos ◽  
Fernando L. Sacomano Filho ◽  
Guenther C. Krieger Filho
Keyword(s):  
Experimental Data ◽  
Natural Gas ◽  
Combustion Chamber ◽  
Gas Turbines ◽  
Low Cost ◽  
Mixture Fraction ◽  
Combustion Model ◽  
Inlet Temperature ◽  
Gas Combustion ◽  
Micro Turbine

Gas turbines are reliable energy conversion systems since they are able to operate with variable fuels and independently from seasonal natural changes. Within that reality, micro gas turbines have been increasing the importance of its usage on the onsite generation. Comparatively, less research has been done, leaving more room for improvements in this class of gas turbines. Focusing on the study of a flexible micro turbine set, this work is part of the development of a low cost electric generation micro turbine, which is capable of burning natural gas, LPG and ethanol. It is composed of an originally automotive turbocompressor, a combustion chamber specifically designed for this application, as well as a single stage axial power turbine. The combustion chamber is a reversed flow type and has a swirl stabilized combustor. This paper is dedicated to the diagnosis of the natural gas combustion in this chamber using computational fluid dynamics techniques compared to measured experimental data of temperature inside the combustion chamber. The study emphasizes the near inner wall temperature, turbine inlet temperature and dilution holes effectiveness. The calculation was conducted with the Reynolds Stress turbulence model coupled with the conventional β-PDF equilibrium along with mixture fraction transport combustion model. Thermal radiation was also considered. Reasonable agreement between experimental data and computational simulations was achieved, providing confidence on the phenomena observed on the simulations, which enabled the design improvement suggestions and analysis included in this work.

Experimental Study on Pressure Fluctuations in the Boundary Layer of an Axisymmetric Body

2011 ◽  
Vol 66-68 ◽  
pp. 1488-1493
Author(s):  
Hong Xiao ◽  
Chao Gao ◽  
Zhen Kun Ma
Keyword(s):  
Boundary Layer ◽  
Experimental Study ◽  
Mach Number ◽  
Dynamic Pressure ◽  
Pressure Fluctuations ◽  
Axisymmetric Body ◽  
Pressure Measurements ◽  
Fluctuating Pressure ◽  
Frequency Domains ◽  
Dynamic Pressure Measurements

The characteristics of the fluctuating pressure in the boundary layer of an axisymmetric body have been investigated experimentally using dynamic pressure measurements and Schlieren photograghs. Data were acquired at subsonic and super-sonic Mach numbers. The angles of attack ranged from 0° to 5°. Pressure signals were measured simultaneously in several positions along the model and were analyzed both in the time and frequency domains. The Mach number shows the relevant influence on . Furthermore, the pressure fluctuations’ level decreases with the increasing of Mach number except M=1.15. And it is shown that, the location along the axis of the model and the angles of attack have small effect on pressure fluctuations.

scholarly journals Effects of Ambient Conditions and Fuel Composition on Combustion Stability

1997 ◽  
Author(s):  
Michael C. Janus ◽  
George A. Richards ◽  
M. Joseph Yip ◽  
Edward H. Robey
Keyword(s):  
Gas Turbines ◽  
Pressure Fluctuations ◽  
Field Testing ◽  
Combustion Stability ◽  
Fuel Composition ◽  
Ambient Conditions ◽  
Reaction Region ◽  
Industrial Gas Turbines ◽  
Thermal Nox ◽  
Combustion Oscillation

Recent regulations on NOx emissions are promoting the use of lean premix (LPM) combustion for industrial gas turbines. LPM combustors avoid locally stoichiometric combustion by premixing fuel and air upstream of the reaction region, thereby eliminating the high temperatures that produce thermal NOx. Unfortunately, this style of combustor is prone to combustion oscillation. Significant pressure fluctuations can occur when variations in heat release periodically couple to acoustic modes in the combustion chamber. These oscillations must be controlled because resulting vibration can shorten the life of engine hardware. Laboratory and engine field testing have shown that instability regimes can vary with environmental conditions. These observations prompted this study of the effects of ambient conditions and fuel composition on combustion stability. Tests are conducted on a subscale combustor burning natural gas, propane, and some hydrogen/hydrocarbon mixtures. A premix, swirl-stabilized fuel nozzle typical of industrial gas turbines is used. Experimental and numerical results describe how stability regions may shift as inlet air temperature, humidity, and fuel composition are altered. Results appear to indicate that shifting instability regimes are primarily caused by changes in reaction rate.

Development of Low Emission Gas Turbine Combustors

2015 ◽  
Author(s):  
Seung-chai Jung ◽  
Siwon Yang ◽  
Shaun Kim ◽  
Ik Soo Kim ◽  
Chul-ju Ahn ◽  
...  
Keyword(s):  
Gas Turbines ◽  
Flow Characteristics ◽  
Flame Stability ◽  
Fuel Distribution ◽  
Eddy Simulation ◽  
Piv Measurement ◽  
Planar Laser ◽  
Air Mixing ◽  
Industrial Gas Turbines ◽  
Combustion Tests

Due to increasing environmental concerns, clean technology has become a key feature in industrial gas turbines. Swirler design is directly associated with the combustion performance for its roles in fuel distribution and flame stability. In this study, the development process of three new conceptual swirlers from Samsung Techwin is presented. Each swirler has unique features to enhance fuel-to-air mixing; Swirler 1 uses tangential air-bypass, Swirler 2 minimizes pressure loss using impeller-like design, and Swirler 3 has combined flow characteristics of axial and radial swirlers. Using extensive computational fluid dynamics (CFD) analysis, lead time and cost in manufacturing the prototypes were significantly reduced. The numerical methods were verified with a lab-scale combustion test; particle image velocimetry (PIV) measurement of cold flow, direct flame images, and OH planar laser induced fluorescence (PLIF) images were compared with result of large-eddy simulation (LES), and they showed good agreement. After design optimization using CFD, full-scale combustion tests were performed for all three swirlers. Flame from each swirler was visualized using a cylindrical quartz liner; direct images and OH chemiluminescence images of flames were obtained. Flame stability and blow-off limit at various air load were examined by gradually lowering the equivalence ratio. NOx and CO concentration were measured at the exhaust. All three swirlers satisfied low NOx and CO levels at the design conditions. The performance maps bounded by the NOx and CO limits and blow-off limit were obtained for all swirlers. Further efforts to maximize the combustors performance will be made.

An Experimental Study of Effects of Confinement Ratio on Swirl Stabilized Flame Macrostructures

2017 ◽  
Author(s):  
Yiheng Tong ◽  
Mao Li ◽  
Marcus Thern ◽  
Jens Klingmann
Keyword(s):  
Flame Front ◽  
Gas Turbines ◽  
Recirculation Zone ◽  
Operating Conditions ◽  
Combustion Stability ◽  
Reconstruction Method ◽  
Lean Blowout ◽  
Image Reconstruction Method ◽  
Root Position ◽  
Industrial Gas Turbines

Swirl stabilized premixed flames are common in industrial gas turbines. The flame shape in the combustor is highly related to the combustion stability and the performance of the gas turbine. In the current paper, the effects of confinement on the time averaged flame structures or flame macrostructures are studied experimentally. Experiments are carried out with swirl number S = 0.66 in two cylindrical confinements with diameters of d1 = 39 mm and d2 = 64 mm and confinement ratio c1 = 0.148 and c2 = 0.0567. All the experiments were carried out in atmospheric. CH∗ chemiluminescence from the flame was recorded to visualize the flame behavior. An inverse Abel image reconstruction method was employed to better distinguish the flame macrostructures. Different mechanisms forming the time averaged M shape flames are proposed and analyzed. It is found that the confinement wall plays an important role in determining the flame macrostructures. The flow structures including the inner and outer recirculation zones formed in the confinement are revealed to be the main reasons that affects different flame macrostructures. Meanwhile, the alternation of flame shapes determines the flame stability characteristics. A smaller confinement diameter forced the flame front to bend upstream into the outer recirculation zone hence forming a M shape flame. A strong noise caused by the interaction of the flame front in the outer recirculation zone with the combustor wall was observed. Another unsteady behavior of the flame in the bigger combustor, which was caused by the alternation of the flame root position inside and outside the premixing tube, is also presented. The V shape flame in the two combustors radiated weaker chemiluminescence but the main heat release zone was elongated than the M shape flame. Other operating conditions, i.e. total mass flow rate of the air flow and the equivalence ratio also affect the flame macrostructures. The flame blowout limits were also altered under different test conditions. The bigger confinement has better performance in stabilizing the flame by having lower lean blowout limits.

Nonlinear Heat-Release/Acoustic Model for Thermoacoustic Instability in Lean Premixed Combustors

1999 ◽  
Vol 121 (3) ◽  
pp. 415-421 ◽  
Author(s):  
A. A. Peracchio ◽  
W. M. Proscia
Keyword(s):  
Heat Release ◽  
Limit Cycle ◽  
Gas Turbines ◽  
Pressure Fluctuations ◽  
Parametric Model ◽  
Operating Conditions ◽  
Cycle Frequency ◽  
Thermoacoustic Instability ◽  
Lean Premixed ◽  
Industrial Gas Turbines

Lean premixed combustors, such as those used in industrial gas turbines to achieve low emissions, are often susceptible to the thermoacoustic combustion instabilities, which manifest themselves as pressure and heat release oscillations in the combustor. These oscillations can result in increased noise and decreased durability due to vibration and flame motion. A physically based nonlinear parametric model has been developed that captures this instability. It describes the coupling of combustor acoustics with the rate of heat release. The model represents this coupling by accounting for the effect of acoustic pressure fluctuations on the varying fuel/air ratio being delivered to the flame, causing a fluctuating heat release due to both fuel air ratio variations and flame front oscillations. If the phasing of the fluctuating heat release and pressure are proper, an instability results that grows into a limit cycle. The nonlinear nature of the model predicts the onset of the instability and additionally captures the resulting limit cycle. Tests of a lean premixed nozzle run at engine scale and engine operating conditions in the UTRC single nozzle rig, conducted under DARPA contract, exhibited instabilities. Parameters from the model were adjusted so that analytical results were consistent with relevant experimental data from this test. The parametric model captures the limit cycle behavior over a range of mean fuel air ratios, showing the instability amplitude (pressure and heat release) to increase and limit cycle frequency to decrease as mean fuel air ratio is reduced.

High-Speed Spectrally Resolved Imaging Studies of Spherically Expanding Natural Gas Flames Under Gas Turbine Operating Conditions

2019 ◽  
Author(s):  
Pradeep Parajuli ◽  
Tyler Paschal ◽  
Mattias A. Turner ◽  
Eric L. Petersen ◽  
Waruna D. Kulatilaka
Keyword(s):  
Natural Gas ◽  
Flame Front ◽  
Gas Turbines ◽  
High Speed ◽  
Laminar Flame ◽  
Turbulent Flame ◽  
Initial Pressure ◽  
Flame Speed ◽  
Operating Conditions ◽  
Important Species

Abstract Natural gas is a major fuel source for many industrial and power-generation applications. The primary constituent of natural gas is methane (CH4), while smaller quantities of higher order hydrocarbons such as ethane (C2H6) and propane (C3H8) can also be present. Detailed understanding of natural gas combustion is important to obtain the highest possible combustion efficiency with minimal environmental impact in devices such as gas turbines and industrial furnaces. For a better understanding the combustion performance of natural gas, several important parameters to study are the flame temperature, heat release zone, flame front evolution, and laminar flame speed as a function of flame equivalence ratio. Spectrally and temporally resolved, high-speed chemiluminescence imaging can provide direct measurements of some of these parameters under controlled laboratory conditions. A series of experiments were performed on premixed methane/ethane-air flames at different equivalence ratios inside a closed flame speed vessel that allows the direct observation of the spherically expanding flame front. The vessel was filled with the mixtures of CH4 and C2H6 along with respective partial pressures of O2 and N2, to obtain the desired equivalence ratios at 1 atm initial pressure. A high-speed camera coupled with an image intensifier system was used to capture the chemiluminescence emitted by the excited hydroxyl (OH*) and methylidyne (CH*) radicals, which are two of the most important species present in the natural gas flames. The calculated laminar flame speeds for an 80/20 methane/ethane blend based on high-speed chemiluminescence images agreed well with the previously conducted Z-type schlieren imaging-based measurements. A high-pressure test, conducted at 5 atm initial pressure, produced wrinkles in the flame and decreased flame propagation rate. In comparison to the spherically expanding laminar flames, subsequent turbulent flame studies showed the sporadic nature of the flame resulting from multiple flame fronts that were evolved discontinuously and independently with the time. This paper documents some of the first results of quantitative spherical flame speed experiments using high-speed chemiluminescence imaging.

scholarly journals A Performance Comparison of Aero-Derivative Gas Turbines and Electric Variable Speed Drives in Pipeline Compressor Duty on TransCanada’s Canadian Mainline

2000 ◽  
Author(s):  
Robert Betts ◽  
Guenther Duchon ◽  
David L. Williams
Keyword(s):  
Natural Gas ◽  
Gas Turbines ◽  
High Speed ◽  
Performance Comparison ◽  
Variable Speed ◽  
Variable Speed Drives ◽  
Natural Gas Transmission ◽  
Industrial Gas Turbines ◽  
Power Utilities ◽  
Drive Systems

Since the early 1960’s, the use of aero-derivative and industrial gas turbines on TransCanada’s natural gas transmission system has been the norm, with a total of 245 units installed to date. In 1996 and 1997 the company installed six high-speed, 30.6 MW, variable speed, electric drive systems. In the same time period eight aero-derivative gas turbines of similar power, with Dry Low Emissions, were installed. After an elapse of three years running time we now have enough data to compare the performance of the two different compressor drivers. A comparison of the performance of the two prime movers is made in a number of different ways. Operation and maintenance costs of the two different systems are considered, including the fuel costs of the natural gas and electricity, from three different Canadian electric power utilities.

Sign in / Sign up

Export Citation Format

Share Document