Acoustic Source Characterization for Prediction of Medium Speed Diesel Engine Exhaust Noise

2013 ◽  
Vol 136 (2) ◽  
Author(s):  
Antti Hynninen ◽  
Mats Åbom
Keyword(s):  
Plane Wave ◽  
High Frequency ◽  
Low Frequency ◽  
Sound Power ◽  
Frequency Range ◽  
Engine Exhaust ◽  
Medium Speed ◽  
Exhaust Duct ◽  
Source Data ◽  
Wave Range

To achieve reliable results when simulating the acoustics of the internal combustion engine (IC-engine) exhaust system and its components, the source characteristics of the engine must be known. In the low frequency range only plane waves propagate and then one-port source data can be determined using, for example, the acoustic multiload method. For the medium speed IC-engines used in power plants and ships, the exhaust duct noise often needs to be analyzed up to 10 kHz, i.e., far beyond the plane wave range, and it is then more appropriate to use acoustic power to characterize the source. This power should ideally be measured under reflection-free conditions in the exhaust duct. The results from an earlier study showed that a suitable way to characterize the source for any frequency is to determine the in-duct sound power by extending the plane wave formulation with frequency band power weighting factors. The aim of this study is to apply this high frequency range method in situ to a real test engine. Another aim is to define, theoretically, how to combine the source data in the low frequency plane wave range with those in the high frequency nonplane wave range using a source sound power formulation.

scholarly journals Acoustic Source Data for Medium Speed IC-Engines

2012 ◽  
Vol 134 (5) ◽  
Author(s):  
Antti Hynninen ◽  
Raimo Turunen ◽  
Mats Åbom ◽  
Hans Bodén
Keyword(s):  
High Frequency ◽  
Internal Combustion Engines ◽  
Low Frequency ◽  
Acoustic Source ◽  
Ic Engine ◽  
Source Characteristics ◽  
Medium Speed ◽  
Source Data ◽  
Exhaust Noise ◽  
Ic Engines

Knowledge of the acoustic source characteristics of internal combustion engines (IC-engines) is of great importance when designing the exhaust duct system and its components to withstand the resulting dynamic loads and to reduce the exhaust noise emission. The goal of the present study is to numerically and experimentally investigate the medium speed IC-engine acoustic source characteristics, not only in the plane wave range but also in the high frequency range. The low frequency acoustic source characteristics were predicted by simulating the acoustic multiload measurements by using a one-dimensional process simulation code. The low frequency in-duct exhaust noise of a medium speed IC-engine can be quite accurately predicted. The high frequency source data is estimated by averaging the measured acoustic pressures with different methods; using the simple cross-spectra averaging method seems promising in this instance.

Procedure to Estimate the In-Duct Sound Power in the High Frequency Range With Non-Plane Waves

2012 ◽  
Author(s):  
Antti Hynninen ◽  
Mats Åbom
Keyword(s):  
Plane Wave ◽  
Gas Turbines ◽  
Internal Combustion Engines ◽  
Plane Waves ◽  
Low Frequency ◽  
Sound Power ◽  
Combustion Engines ◽  
Duct Systems ◽  
Acoustic Characterization ◽  
Wave Range

The acoustic characterization of fluid machines, e.g., internal combustion engines, compressors, or fans is of great importance when designing the connected duct systems and its silencers. For machines connected to large ducts where also the non-plane wave range is important, for instance large diesels and gas turbines, a suitable way to characterize the source is to determine the sound power under reflection free conditions. For the low frequency plane wave range in-duct sound power can be measured with the widely used two microphone method. The goal of this study is to investigate how, starting from the two-microphone approach, a suitable wall mounted microphone configuration can be defined and used to estimate the propagating in-duct sound power also beyond the plane wave range. For this purpose an acoustic source test-rig was built and numerical simulations were also conducted. The in-duct sound power from monopole, dipole, and quadrupole source types was determined using twelve wall mounted microphones and cross-spectra averaging methods. The in-duct results were compared against sound power measured using the reverberation room method (ISO 3741). Based on the simulations and the experimental results the best microphone positions and weighting factors were determined.

Evaluation of Special Hearing Aids for Deaf Children

1971 ◽  
Vol 36 (4) ◽  
pp. 527-537 ◽  
Author(s):  
Norman P. Erber
Keyword(s):  
Hearing Aids ◽  
High Frequency ◽  
Hearing Aid ◽  
Low Frequency ◽  
Acoustic Stimulation ◽  
Deaf Children ◽  
Frequency Range ◽  
Frequency Limit ◽  
Unpublished Studies ◽  
Published Research

Two types of special hearing aid have been developed recently to improve the reception of speech by profoundly deaf children. In a different way, each special system provides greater low-frequency acoustic stimulation to deaf ears than does a conventional hearing aid. One of the devices extends the low-frequency limit of amplification; the other shifts high-frequency energy to a lower frequency range. In general, previous evaluations of these special hearing aids have obtained inconsistent or inconclusive results. This paper reviews most of the published research on the use of special hearing aids by deaf children, summarizes several unpublished studies, and suggests a set of guidelines for future evaluations of special and conventional amplification systems.

scholarly journals An Improved Time Integration Method Based on Galerkin Weak Form with Controllable Numerical Dissipation

2021 ◽  
Vol 11 (4) ◽  
pp. 1932
Author(s):  
Weixuan Wang ◽  
Qinyan Xing ◽  
Qinghao Yang
Keyword(s):  
High Frequency ◽  
Integration Method ◽  
Time Integration ◽  
Low Frequency ◽  
Weak Form ◽  
High Accuracy ◽  
Numerical Dissipation ◽  
Frequency Range ◽  
Time Integration Method ◽  
Numerical Damping

Based on the newly proposed generalized Galerkin weak form (GGW) method, a two-step time integration method with controllable numerical dissipation is presented. In the first sub-step, the GGW method is used, and in the second sub-step, a new parameter is introduced by using the idea of a trapezoidal integral. According to the numerical analysis, it can be concluded that this method is unconditionally stable and its numerical damping is controllable with the change in introduced parameters. Compared with the GGW method, this two-step scheme avoids the fast numerical dissipation in a low-frequency range. To highlight the performance of the proposed method, some numerical problems are presented and illustrated which show that this method possesses superior accuracy, stability and efficiency compared with conventional trapezoidal rule, the Wilson method, and the Bathe method. High accuracy in a low-frequency range and controllable numerical dissipation in a high-frequency range are both the merits of the method.

scholarly journals A Compact Four-Port Coplanar Antenna Based on an Excitation Switching Reconfigurable Mechanism for Cognitive Radio Applications

2019 ◽  
Vol 9 (15) ◽  
pp. 3157 ◽  
Author(s):  
O ◽  
Jin ◽  
Choi
Keyword(s):  
Cognitive Radio ◽  
High Frequency ◽  
Coplanar Waveguide ◽  
Low Frequency ◽  
Loop Antenna ◽  
Ultra Wideband ◽  
Frequency Range ◽  
Uwb Antenna ◽  
High Isolation ◽  
Loop Antennas

In this paper, we propose a compact four-port coplanar antenna for cognitive radio applications. The proposed antenna consists of a coplanar waveguide (CPW)-fed ultra-wideband (UWB) antenna and three inner rectangular loop antennas. The dimensions of the proposed antenna are 42 mm × 50 mm × 0.8 mm. The UWB antenna is used for spectrum sensing and fully covers the UWB spectrum of 3.1–10.6 GHz. The three loop antennas cover the UWB frequency band partially for communication purposes. The first loop antenna for the low frequency range operates from 2.96 GHz to 5.38 GHz. The second loop antenna is in charge of the mid band from 5.31 GHz to 8.62 GHz. The third antenna operates from 8.48 GHz to 11.02 GHz, which is the high-frequency range. A high isolation level (greater than 17.3 dB) is realized among the UWB antenna and three loop antennas without applying any additional decoupling structures. The realized gains of the UWB antenna and three loop antennas are greater than 2.7 dBi and 1.38 dBi, respectively.

Electromagnetic Property of La0.7Sr0.3MnO3/Ag Composite at High Frequency

2015 ◽  
Vol 655 ◽  
pp. 182-185
Author(s):  
Ke Lan Yan ◽  
Run Hua Fan ◽  
Min Chen ◽  
Kai Sun ◽  
Xu Ai Wang ◽  
...  
Keyword(s):  
High Frequency ◽  
Single Phase ◽  
Low Frequency ◽  
Electromagnetic Property ◽  
High Frequency Range ◽  
Frequency Range ◽  
Free Electron Concentration ◽  
Theoretical Simulation ◽  
Electrical And Magnetic Properties ◽  
Three Phase

The phase structure, and electrical and magnetic properties of La0.7Sr0.3MnO3(LSMO)-xAg (xis the mole ratio,x=0, 0.3, 0.5) composite were investigated. It is found that the sample withx=0 is single phase; the samples withx=0.3 and 0.5 present three phase composite structure of the manganese oxide and Ag. With the increasing of Ag content, the grain size of the samples increases and the grain boundaries transition from fully faceted to partially faceted. The permittivity of spectrum (10 MHz - 1 GHz) and the theoretical simulation reveal that the plasma frequencyfpincrease with Ag content, due to the increasing of free electron concentration, which is further supported by the enhancement of conductivity. While for the permeability (μr'), theμr'decrease with the increasing of Ag content at low frequency range (f< 20 MHz), while at the relative high frequency range (f> 300 MHz), theμr'increased with Ag content. Therefore, the introduction of elemental Ag resulted in a higherμr'at the relative high frequency range.

Anderson-Stuart Model to Analyze AC and DC Conductivity of Lithium Zinc-Silicate Glass / Glass-Ceramics

2007 ◽  
Vol 280-283 ◽  
pp. 919-924
Author(s):  
M.S. Jogad ◽  
V.K. Shrikhande ◽  
A.H. Dyama ◽  
L.A. Udachan ◽  
Govind P. Kothiyal
Keyword(s):  
High Frequency ◽  
Glass Ceramics ◽  
Low Frequency ◽  
Frequency Region ◽  
Dc Conductivity ◽  
Frequency Range ◽  
High Frequency Region ◽  
Dc Conductivities ◽  
Conductivity Variation ◽  
Different Temperatures

AC and DC conductivities have been measured by using the real (e¢) and imaginary (e¢¢) parts of the dielectric constant data of glass and glass-ceramics (GC) at different temperatures in the rage 297-642K and in the frequency range 100 Hz to 10 MHz. Using Anderson –Stuart model, we have calculated the activation energy, which is observed to be lower than that of the DC conductivity. The analysis for glass/glass-ceramics indicates that the conductivity variation with frequency exhibits an initial linear region followed by nonlinear region with a maximum in the high-frequency region. The observed frequency dependence of ionic conductivity has been analyzed within the extended Anderson–Stuart model considering both the electrostatic and elastic strain terms. In glass/glassceramic the calculations based on the Anderson-Stuart model agree with the experimental observations in the low frequency region but at higher frequencies there is departure from measured data.

Shallow subsurface mapping by electromagnetic sounding in the 300 kHz to 30 MHz range: Model studies and prototype system assessment

Geophysics ◽  
1994 ◽  
Vol 59 (8) ◽  
pp. 1201-1210 ◽  
Author(s):  
Duff C. Stewart ◽  
Walter L. Anderson ◽  
Thomas P. Grover ◽  
Victor F. Labson
Keyword(s):  
Dielectric Permittivity ◽  
High Frequency ◽  
Low Frequency ◽  
Computer Programs ◽  
Thin Layers ◽  
Depth Range ◽  
Frequency Range ◽  
Model Studies ◽  
New Instrument ◽  
Displacement Currents

A new instrument designed for frequency‐domain sounding in the depth range 0–10 m uses short coil spacings of 5 m or less and a frequency range of 300 kHz to 30 MHz. In this frequency range, both conduction currents (controlled by electrical conductivity) and displacement currents (controlled by dielectric permittivity) are important. Several surface electromagnetic survey systems commonly used (generally with frequencies less than 60 kHz) are unsuitable for detailed investigation of the upper 5 m of the earth or, as with ground‐penetrating radar, are most effective in relatively resistive environments. Most computer programs written for interpretation of data acquired with the low‐frequency systems neglect displacement currents, and are thus unsuited for accurate high‐frequency modeling and interpretation. New forward and inverse computer programs are described that include displacement currents in layered‐earth models. The computer programs and this new instrument are used to evaluate the effectiveness of shallow high‐frequency soundings based on measurement of the tilt angle and the ellipticity of magnetic fields. Forward model studies indicate that the influence of dielectric permittivity provides the ability to resolve thin layers, especially if the instrument frequency range can be extended to 50 MHz. Field tests of the instrument and the inversion program demonstrate the potential for detailed shallow mapping wherein both the resistivity and the dielectric permittivity of layers are determined. Although data collection and inversion are much slower than for low‐frequency methods, additional information is obtained inasmuch as there usually is a permittivity contrast as well as a resistivity contrast at boundaries between different materials. Determination of dielectric permittivity is particularly important for hazardous waste site characterization because the presence of some contaminants may have little effect on observed resistivity but a large effect on observed permittivity.

How word frequency affects morphological processing in monolinguals and bilinguals

2003 ◽  
Vol 6 (3) ◽  
pp. 213-225 ◽  
Author(s):  
MINNA LEHTONEN ◽  
MATTI LAINE
Keyword(s):  
High Frequency ◽  
Low Frequency ◽  
Morphological Processing ◽  
Decision Task ◽  
Frequency Range ◽  
Medium Frequency ◽  
Word Forms ◽  
Full Form ◽  
Differential Pattern ◽  
Complex Words

The present study investigated processing of morphologically complex words in three different frequency ranges in monolingual Finnish speakers and Finnish-Swedish bilinguals. By employing a visual lexical decision task, we found a differential pattern of results in monolinguals vs. bilinguals. Monolingual Finns seemed to process low frequency and medium frequency inflected Finnish nouns mostly by morpheme-based recognition but high frequency inflected nouns through full-form representations. In contrast, bilinguals demonstrated a processing delay for all inflections throughout the whole frequency range, suggesting decomposition for all inflected targets. This may reflect different amounts of exposure to the word forms in the two groups. Inflected word forms that are encountered very frequently will acquire full-form representations, which saves processing time. However, with the lower rates of exposure, which characterize bilingual individuals, full-form representations do not start to develop.

Sign in / Sign up

Export Citation Format

Share Document