Large Eddy Simulations of Thermal Boundary Layer Spatial Development in a Turbulent Channel Flow

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Marc Sanchez ◽  
Frédéric Aulery ◽  
Adrien Toutant ◽  
Françoise Bataille
Keyword(s):  
Boundary Layer ◽  
Channel Flow ◽  
Thermal Boundary Layer ◽  
Turbulent Channel Flow ◽  
Spatial Development ◽  
Large Eddy Simulations ◽  
Boundary Layer Development ◽  
Large Eddy ◽  
The Mean ◽  
Heat Transfers

This article presents Large Eddy Simulations of thermal boundary layer spatial development in a low-Mach number turbulent channel flow. A coupling between isothermal biperiodic channel and anisothermal open channel is done to obtain a fully developed turbulent inlet. The interaction between a high temperature gradient and a turbulent flow is studied during the thermal boundary layer development. Turbulence and temperature quantities are analyzed for both streamwise and wall-normal directions. The results show how the asymmetrical heating modifies the velocity of the flow. The correlation between turbulence and heat transfers is studied. The mean and the fluctuation profiles are found to be asymmetrical. They evolve along the channel and are perturbed by the thermal gradient. Fluctuation destruction and creation areas in the length of the channel are highlighted.

scholarly journals Large-Eddy Simulations of a Drizzling, Stratocumulus-Topped Marine Boundary Layer

2009 ◽  
Vol 137 (3) ◽  
pp. 1083-1110 ◽  
Author(s):  
Andrew S. Ackerman ◽  
Margreet C. vanZanten ◽  
Bjorn Stevens ◽  
Verica Savic-Jovcic ◽  
Christopher S. Bretherton ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Marine Boundary Layer ◽  
Cloud Water ◽  
Large Eddy Simulations ◽  
Cloud Base ◽  
Entrainment Rate ◽  
Liquid Water Path ◽  
Average Maximum ◽  
Large Eddy ◽  
The Mean

Abstract Cloud water sedimentation and drizzle in a stratocumulus-topped boundary layer are the focus of an intercomparison of large-eddy simulations. The context is an idealized case study of nocturnal stratocumulus under a dry inversion, with embedded pockets of heavily drizzling open cellular convection. Results from 11 groups are used. Two models resolve the size distributions of cloud particles, and the others parameterize cloud water sedimentation and drizzle. For the ensemble of simulations with drizzle and cloud water sedimentation, the mean liquid water path (LWP) is remarkably steady and consistent with the measurements, the mean entrainment rate is at the low end of the measured range, and the ensemble-average maximum vertical wind variance is roughly half that measured. On average, precipitation at the surface and at cloud base is smaller, and the rate of precipitation evaporation greater, than measured. Including drizzle in the simulations reduces convective intensity, increases boundary layer stratification, and decreases LWP for nearly all models. Including cloud water sedimentation substantially decreases entrainment, decreases convective intensity, and increases LWP for most models. In nearly all cases, LWP responds more strongly to cloud water sedimentation than to drizzle. The omission of cloud water sedimentation in simulations is strongly discouraged, regardless of whether or not precipitation is present below cloud base.

scholarly journals Evaluation of large-eddy simulations forced with mesoscale model output for a multi-week period during a measurement campaign

2017 ◽  
Vol 17 (11) ◽  
pp. 7083-7109 ◽  
Author(s):  
Rieke Heinze ◽  
Christopher Moseley ◽  
Lennart Nils Böske ◽  
Shravan Kumar Muppa ◽  
Vera Maurer ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Mesoscale Model ◽  
Large Eddy Simulations ◽  
Model Output ◽  
Synoptic Scale ◽  
High Definition ◽  
Shallow Cumulus ◽  
Large Eddy ◽  
Lidar Measurements ◽  
The Mean

Abstract. Large-eddy simulations (LESs) of a multi-week period during the HD(CP)2 (High-Definition Clouds and Precipitation for advancing Climate Prediction) Observational Prototype Experiment (HOPE) conducted in Germany are evaluated with respect to mean boundary layer quantities and turbulence statistics. Two LES models are used in a semi-idealized setup through forcing with mesoscale model output to account for the synoptic-scale conditions. Evaluation is performed based on the HOPE observations. The mean boundary layer characteristics like the boundary layer depth are in a principal agreement with observations. Simulating shallow-cumulus layers in agreement with the measurements poses a challenge for both LES models. Variance profiles agree satisfactorily with lidar measurements. The results depend on how the forcing data stemming from mesoscale model output are constructed. The mean boundary layer characteristics become less sensitive if the averaging domain for the forcing is large enough to filter out mesoscale fluctuations.

Sign in / Sign up

Export Citation Format

Share Document