scholarly journals Closure to “Discussions of ‘Stresses and Displacements in a Rotating Conical Shell’” (1943, ASME J. Appl. Mech., 10, pp. A233–A234)

1943 ◽  
Vol 10 (4) ◽  
pp. A234
Author(s):  
J. L. Meriam
Keyword(s):  
Conical Shell ◽  
Rotating Conical Shell

Stresses and Displacements in a Rotating Conical Shell

1943 ◽  
Vol 10 (2) ◽  
pp. A53-A61
Author(s):  
J. L. Meriam
Keyword(s):  
Conical Shell ◽  
Body Force ◽  
Theory Of Elasticity ◽  
Common Type ◽  
The Body ◽  
Surface Loading ◽  
Thin Walled Structures ◽  
Special Cases ◽  
Engineering Problems ◽  
Rotating Conical Shell

Abstract The analysis of shells is an important subdivision of the general theory of elasticity, and its application is useful in the solution of engineering problems involving thin-walled structures. A common type of shell is one which possesses symmetry with respect to an axis of revolution. A theory for such shells has been developed by various investigators (1, 2, 3, 6) and applied to a few simple cases such as the cylindrical, spherical, and conical shapes. Boundary conditions, for the most part, have been simple static ones, and conditions of surface loading have been included in certain special cases. This paper extends the theory of axially symmetrical shells by including the body force of rotation about the axis and applies the results to the rotating conical shell. The analysis follows a pattern established by several investigators (1, 2, 3, 6) and for this reason is abbreviated to a considerable extent. Only where the inclusion of the body force makes elucidation advisable or where a slightly different method of approach is used are the steps presented in more detail.

ANALYSIS OF THE INFLUENCE OF DIMENSIONS OF THE ROPE MIDWATER TRAWLS ON THEIR PERFORMANCE SUBJECT TO GEOMETRIC PROPERTIES OF CONE SHELLS

2017 ◽  
pp. 25-33
Author(s):  
Alexander Vasilievich Dvernik
Keyword(s):  
Surface Properties ◽  
Conical Shell ◽  
Side Surface ◽  
Theoretic Analysis ◽  
Good Convergence ◽  
Large Size ◽  
Quality Coefficient ◽  
Geometric Quality ◽  
The Relationship ◽  
Parameters Calculation

The article studies different shell constructions of mid-water trawls and their properties. The problem settled is suggested to be solved taking into account real geometric interrelations between spacious and surface properties of cone shells. The author suggests to accept a so-called geometric quality coefficient as a criterion of the properties of a conical shell, which represents the ratio of the shell to the area of its side surface and by analogy to use it to the shell of the trawl. The relationship between the trawl dimensions and geometric quality coefficient have been studied. Comparing these figures with the actual characteristics of trawls showed good convergence. According to the results of theoretic analysis and parameters calculation, trawl large-size shells will always have advantages in geometric characteristics over mid-size and, especially, small-size shells. The results of the analysis can be used for approximate calculations of the parameters of the trawl and justification of ways to improve the performance of existing mid-water trawls.

Stability and vibration analysis of an axially moving thin walled conical shell

2021 ◽  
pp. 107754632199760
Author(s):  
Hossein Abolhassanpour ◽  
Faramarz Ashenai Ghasemi ◽  
Majid Shahgholi ◽  
Arash Mohamadi
Keyword(s):  
Natural Frequency ◽  
Conical Shell ◽  
Shell Theory ◽  
Cone Angle ◽  
Theory Of Elasticity ◽  
Lower Velocity ◽  
Motion Equations ◽  
Conical Shells ◽  
Divergence Instability ◽  
Axially Moving

This article deals with the analysis of free vibration of an axially moving truncated conical shell. Based on the classical linear theory of elasticity, Donnell shell theory assumptions, Hamilton principle, and Galerkin method, the motion equations of axially moving truncated conical shells are derived. Then, the perturbation method is used to obtain the natural frequency of the system. One of the most important and controversial results in studies of axially moving structures is the velocity detection of critical points. Therefore, the effect of velocity on the creation of divergence instability is investigated. The other important goal in this study is to investigate the effect of the cone angle. As a novelty, our study found that increasing or decreasing the cone angle also affects the critical velocity of the structure in addition to changing the natural frequency, meaning that with increasing the cone angle, the instability occurs at a lower velocity. Also, the effect of other parameters such as aspect ratio and mechanical properties on the frequency and instability points is investigated.

Sign in / Sign up

Export Citation Format

Share Document