Operation Analysis and Thermoeconomic Evaluation of a Cogeneration Power Plant Operating as a Self-Generator in the Ecuadorian Electrical Market and Sugar Industry

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
Washington Orlando Irrazabal Bohorquez ◽  
João Roberto Barbosa ◽  
Luiz Augusto Horta Nogueira
Keyword(s):  
Power Plant ◽  
Thermoelectric Power ◽  
Sugarcane Bagasse ◽  
Power Plants ◽  
Sugar Industry ◽  
Hydroelectric Power Plant ◽  
Hydroelectric Power ◽  
Operation Analysis ◽  
Productive Process ◽  
Thermoelectric Power Plants

This study evaluates the integral use of the sugarcane bagasse on the productive process of a cogeneration power plant in an Ecuadorian Sugar Company. Thermoelectric power plants burning biomass require a large initial investment and, for example, this initial investment requires $800/kW, which is double the initial investment of a conventional thermoelectric power plant that is $400/kW, and almost similar to the initial cost of a hydroelectric power plant that is $1000/kW. A thermoeconomic study was made on the production of electricity and the sales of the exceeding 27 MW average. From the results, it was concluded that generated electricity costs are $0.0443/kW h, in comparison with the costs of the supplied electricity through fossil power plants with values in the range $0.03–$0.15/kW h and hydroelectric power plants with a value of about $0.02/kW h. Cogeneration power plants burning sugarcane bagasse could contribute to the mitigation of climatic change. This specific case study shows the reduction of the prospective emissions of greenhouse effect gases in the amount of 55,188 ton of CO2 equivalent per year.

Functional Analysis and Exergoeconomic Evaluation for the Combined Production of Electromechanical Power and Useful Heat of a Cogeneration Power Plant

2011 ◽  
Author(s):  
Washington Orlando Irrazabal Bohorquez ◽  
Joa˜o Roberto Barbosa
Keyword(s):  
Power Plant ◽  
Electricity Market ◽  
Sugar Cane ◽  
Power Plants ◽  
Hydroelectric Power Plant ◽  
Sugar Cane Bagasse ◽  
Fuel Oil ◽  
Hydroelectric Power ◽  
The Us ◽  
Electrical Generation

In the Ecuadorian electrical market, several sugar plants, which significantly participate in the local electricity market, are producing their own energy and commercializing the surplus to the electrical market. This study evaluates the integral use of the sugar cane bagasse for productive process on a Cogeneration Power Plant in an Ecuadorian Sugar Company [8]. The electrical generation based on biomass requires a great initial investment. The cost is around US$ 800/kW installed, twice the US$ 400/kW initial investment of conventional thermoelectric power plant and almost equal to the US$ 1,000/kW initial cost of hydroelectric power plant [5]. A thermoeconomic study was carried out on the production of electricity and the sales of the surplus of 27 MWe average produced by the power plant. An operational analysis was made using instantaneous values from the estimated curves of demand and generation of electricity. From the results, it was concluded that the generated electricity costs are 0.0443 US$/kWh, while the costs of the electricity from Fossil Power Plants (burning fuel oil, diesel fuel and natural gas) are in the range 0.03–0.15 US$/kWh and from Hydroelectric Plants are about 0.02 US$/kWh. Cogeneration power plants burning sugar cane bagasse could contribute to the mitigation of climatic change. This specific case study shows the reduction of the prospective emissions of greenhouse gases, around 55,188 ton of CO2 equivalent yearly for this cogeneration power plant.

Small Scale Prototype Biomass Drying System for Co-Combustion With Coal

2013 ◽  
Author(s):  
Heather Roberts ◽  
Mitch Favrow ◽  
Jesse Coatney ◽  
David Yoe ◽  
Chenaniah Langness ◽  
...  
Keyword(s):  
Power Plant ◽  
Thermoelectric Power ◽  
Renewable Resources ◽  
Power Plants ◽  
Waste Heat ◽  
Coefficient Of Performance ◽  
Small Scale ◽  
Drying Time ◽  
Thermoelectric Power Plants ◽  
Drying System

Thermoelectric power plants burn thousands of tons of non-renewable resources every day to heat water and create steam, which drives turbines that generate electricity. This causes a significant drain on local resources by diverting water for irrigation and residential usage into the production of energy. Moreover, the use of fossil reserves releases significant amounts of greenhouse and hazardous gases into the atmosphere. As electricity consumption continues to grow and populations rise, there is a need to find other avenues of energy production while conserving water resources. Co-combusting biomass with coal is one potential route that promotes renewable energy while reducing emissions from thermoelectric power plants. In order to move in this direction, there is a need for a low-energy and low-cost system capable of drying materials to a combustion appropriate level in order to replace a significant fraction of the fossil fuel used. Biomass drying is an ancient process often involving the preservation of foods using passive means, which is economically efficient but slow and impractical for large-scale fuel production. This effort, accomplished as an undergraduate capstone design project, instead implements an active drying system for poplar wood using theorized waste heat from the power plant and potentially solar energy. The use of small-scale prototypes demonstrate the principles of the system at a significantly reduced cost while allowing for calculation of mass and energy balances in the analysis of drying time, Coefficient of Performance, and the economics of the process. Experimental tests illustrate the need to distribute air and heat evenly amongst the biomass for consistent drying. Furthermore, the rotation of biomass is critical in order to address the footprint of the system when placing next to an existing thermoelectric power plant. The final design provides a first step towards the refinement and development of a system capable of efficiently returning an amount of biomass large enough to replace non-renewable resources. Finally, an innovative methodology applied to the dryer is discussed that could recover water evaporated from the biomass and utilize it for agricultural purposes or within the power plant thermodynamic cycle.

scholarly journals Rancang Bangun Miniatur Pembangkit Listrik Tenaga Mikrohidro Dibengkel Teknik Listrik Universitas Batanghari Jambi

2020 ◽  
Vol 2 (2) ◽  
pp. 41
Author(s):  
Ottentri Ottentri ◽  
Hendi Matalata
Keyword(s):  
Power Plant ◽  
Rural Areas ◽  
Power Plants ◽  
Water Discharge ◽  
Hydroelectric Power Plant ◽  
Electrical Energy ◽  
Hydroelectric Power ◽  
Mountainous Areas ◽  
Know How ◽  
Essential Components

The need for electrical energy is a necessity that can not be ditawar–tawar anymore for a life worthy of every person in this day. Generally, remote rural areas located in mountainous areas have a large potential of water energy, so that the hydroelectric power plant is one of the energy sources that can be developed. Jambi is an area covered with Batanghari River flows. This research aims to know how the work process of Microhydro power plant.  Components of the essential components of miniature microhydro power plants are reservoirs, rapid pipes, turbines, generators where these components are not loose bias, interrelated to one another. Round of Tubin obtained from the experiment is 400 rpm with water discharge 0.0016 m3/s. The maximum voltage generated by the generator is 18 volts. Voltage generated from the generator to charging the Batrai used inverter of 13.1 volts. The load will remain on even though the main energy source is the generator stop in the same, because the energy of the second is Batrai.

scholarly journals Hydroelectric Power Plants ’ Re Servoirs And Their Impact On The Environment

2015 ◽  
Vol 1 ◽  
pp. 171 ◽  
Author(s):  
M. I. Balzannikov ◽  
E. G. Vyshkin
Keyword(s):  
Renewable Energy ◽  
Power Plant ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Hydroelectric Power Plant ◽  
Energy Sources ◽  
Hydroelectric Power ◽  
Hydroelectric Power Plants ◽  
Different Types ◽  
The Way

The paper presents the analysis of different types of impact the hydroelectric power plants’ reservoirs could make on the environment. Hydroelectric power plants (HPP) produce ecologically safe energy and correspond to the modern striving for sustainability because they are operated on renewable energy sources. At the same time they can provoke various potential dangers for the environment. The objective of the investigation is to demonstrate the interrelation between the type and structure of a hydroelectric power plant and the way its reservoir may impact on the nature surrounding the plant. These effects may be direct and indirect, positive and negative and vary from insignificant that can be easily fixed to those that are irreversible and catastrophic. The latter should be taken into account during the design of HPP.

scholarly journals SAVING RESOURCES IN THE CONSTRUCTION OF HYDROELECTRIC POWER PLANTS

2019 ◽  
Vol 1 ◽  
pp. 20
Author(s):  
Mikhail Balzannikov
Keyword(s):  
Power Plant ◽  
Peak Power ◽  
Power Plants ◽  
Hydroelectric Power Plant ◽  
Operating Conditions ◽  
Hydroelectric Power ◽  
Construction Work ◽  
Construction Costs ◽  
Suction Pipe ◽  
Hydroelectric Power Plants

The article describes run-of-the-river hydroelectric power plants. The authors specify the importance of performing technical and economic calculations in justifying the large-sized units of the water-supplying channel of a run-of-the-river hydroelectric power plant: turbine pits and suction (discharge) pipes. The study shows that the amount of construction work and the total cost of building a hydroelectric power plant depend on the size of these water supply units. The research objective is to analyze the validity of establishing the main dimensions of the suction pipes for modern technical and economic conditions. The researchers use the discounted income method. The calculations are performed for a hydroelectric power plant with an elbow suction pipe. The analysis of how the operating conditions of a hydroelectric power plant influence the savings of construction resources is carried out. The analysis shows that saving construction resources by reducing the length of the suction pipe is justified if the hydroelectric power plamt is designed to work only at peak power loads. For hydroelectric power plants operating at semi-peak or base power loads, the additional construction costs would be appropriate if leading to the decrease in pressure loss and to the increase in electricity generation.

scholarly journals Use of portable environmental sensors in the monitoring of the thermoelectric power plants operation

2020 ◽  
Vol 11 (6) ◽  
pp. 178-201
Author(s):  
Joaci Dos Santos Cerqueira ◽  
Helder Neves de Albuquerque ◽  
Mário Luiz Farias Cavalcanti ◽  
Francisco De Assis Salviano de Sousa
Keyword(s):  
Wind Speed ◽  
Power Plant ◽  
Thermoelectric Power ◽  
Power Plants ◽  
Dew Point ◽  
Environmental Sensors ◽  
Point Temperature ◽  
Dew Point Temperature ◽  
Thermoelectric Power Plants ◽  
Thermoelectric Power Plant

Thermoelectric power plants can directly cause environmental impacts with respect to emissions of atmospheric gases caused by combustion for operation, being the main agents: unburned hydrocarbons, carbon oxides, sulfur oxides, nitrogen oxides, volatile organic compounds and material particulate. Thus, this research aimed to measure and compare the instantaneous levels of the chemical compounds CO2, CO, SO2, noise, air temperature, relative humidity, dew point temperature, wind speed and luminescence in two peri-urban areas of the surrounding a thermoelectric power plant in the interior of Paraíba, Brazil. To this end, data were collected using environmental sensors (a Garmin Gpsmap 62sc GPS camera 5mp; a Canon powershot SX60HS 16.1MP LCD 3.0 semi-professional digital camera, 65x optical zoom; an ITMCO2-600 meter for measuring CO2 and CO; one ITMP-600 multifunctional meter for AVG/MAX/MIN/DIF measurement, temperature measurement, humidity measurement, sound level measurement, luminescence measurement and wind speed measurement; and a GasAlert Extreme SO2 Gas detector to measure concentrations of sulfur in the environment), from October 2015 to March 2017, during daytime, between 7:00am to 9:00am, with weekly frequency, with instantaneous sampling measurements being collected at the collection points, near the thermoelectric power plant (Area 1) and close to the BR/104 highway (Area 2). The results showed that the records through the environmental sensors were not significant among the areas surveyed regarding the values of CO, CO2, SO2, air temperature, relative humidity, dew point temperature and luminescence. Regarding the wind speed, the two areas showed little variation. The noise levels in Area 1, on the other hand, during the operation of the thermoelectric power plant in its fullness, there was an increase above the permitted level, according to current Brazilian regulations, causing damage to the health of the inhabitants of its surroundings, in addition to harming the fauna of the surrounding area. around, mainly, the birds that are driven away by the noise, and, consequently, reducing the diversity of the avifauna surrounding the Thermoelectric. Thus, the use of environmental sensors to monitor the air quality of this area is very important, thus serving as a comparative support for future studies, as well as establishing the genesis for an environmental database in this metropolitan region of Campina Grande/PB, Brazil.

scholarly journals Risk Based Maintenance in the Hydroelectric Power Plants

Energies ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1502 ◽  
Author(s):  
Evrencan Özcan ◽  
Rabia Yumuşak ◽  
Tamer Eren
Keyword(s):  
Power Plant ◽  
Energy Supply ◽  
Power Plants ◽  
Low Cost ◽  
Hydroelectric Power Plant ◽  
Planning Problem ◽  
Maintenance Planning ◽  
Hydroelectric Power ◽  
Risk Levels ◽  
Hydroelectric Power Plants

In this study, maintenance planning problem is handled in one of the hydroelectric power plants which directly affect Turkey’s energy supply security with a fifth share in the total generation. In this study, a result is obtained by taking into consideration the multi-objective and multi-criteria structure of the maintenance planning in the hydroelectric power plants with thousands of complex equipment and the direct effect of this equipment on uninterrupted and low-cost electricity generation. In the first stage, the risk levels of the equipment in terms of the power plant are obtained with the combination of AHP (Analytical Hierarchy Process) and TOPSIS (technique for order preference by similarity to ideal solution) which are frequently used in the literature due to their advantages. Department-based maintenance plans of all equipment for periodic and revision maintenance strategies are formed by integrating these values into the time allocated for maintenance and the number of employees constraints. As a result of the application of this methodology which is designed for the first time in the literature with the integration of multi-criteria decision-making methods for the maintenance planning problem in a hydroelectric power plant, all elements that prevent the sustainable energy supply in the power plant are eliminated.

scholarly journals A Data-Driven Approach to Extend Failure Analysis: A Framework Development and a Case Study on a Hydroelectric Power Plant

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6400
Author(s):  
Sara Antomarioni ◽  
Marjorie Maria Bellinello ◽  
Maurizio Bevilacqua ◽  
Filippo Emanuele Ciarapica ◽  
Renan Favarão da Silva ◽  
...  
Keyword(s):  
Power Plant ◽  
Failure Analysis ◽  
Power Plants ◽  
Failure Modes ◽  
Real Life ◽  
Hydroelectric Power Plant ◽  
Data Driven ◽  
Hydroelectric Power ◽  
Data Driven Approach

Power plants are required to supply the electric demand efficiently, and appropriate failure analysis is necessary for ensuring their reliability. This paper proposes a framework to extend the failure analysis: indeed, the outcomes traditionally carried out through techniques such as the Failure Mode and Effects Analysis (FMEA) are elaborated through data-driven methods. In detail, the Association Rule Mining (ARM) is applied in order to define the relationships among failure modes and related characteristics that are likely to occur concurrently. The Social Network Analysis (SNA) is then used to represent and analyze these relationships. The main novelty of this work is represented by support in the maintenance management process based not only on the traditional failure analysis but also on a data-driven approach. Moreover, the visual representation of the results provides valuable support in terms of comprehension of the context to implement appropriate actions. The proposed approach is applied to the case study of a hydroelectric power plant, using real-life data.

AC/DC/AC converter in a small hydroelectric power plant

2011 ◽  
Vol 59 (4) ◽  
pp. 507-511 ◽  
Author(s):  
A. Sikorski ◽  
M. Korzeniewski
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Power Grid ◽  
Hydroelectric Power Plant ◽  
Induction Generator ◽  
Hydroelectric Power ◽  
Transient States ◽  
Voltage Decay ◽  
Start Up ◽  
Hydroelectric Power Plants

AC/DC/AC converter in a small hydroelectric power plant The article discusses application of AC/DC/AC converter cooperating with an induction generator in small hydroelectric power plants. The induction generator works with power grid or a separated group of receivers, enabling to generate power even at low speeds of the turbine. The article provides also results of the investigation concerning the functioning of the generator coupled with AC/DC/AC converter in steady and transient states during start-up and voltage decay.

scholarly journals Design and Construction of Single Phase Radial Flux Permanent Magnet Generators for Pico hydro Scale Power Plants Using Propeller Turbines in Water Pipes

2020 ◽  
Vol 188 ◽  
pp. 00006
Author(s):  
Eko Yohanes Setyawan ◽  
Yusuf Ismail Nakhoda ◽  
Awan Uji Krismanto ◽  
Lalu Mustiadi ◽  
Erkata Yandri ◽  
...  
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Permanent Magnets ◽  
Water Pressure ◽  
Hydroelectric Power Plant ◽  
Small Scale ◽  
Hydroelectric Power ◽  
Special Profile ◽  
Water Turbine ◽  
Main Components

Pico hydro or a small scale hydroelectric power plant is used as the rotating energy of the generator. Pico hydro is a hydroelectric power plant that has a power of less than 5 kW. Technically, Pico hydro has three main components namely water, turbine and generator. Turbine type propeller reaction has a special profile that causes a decrease in water pressure during the blades. This pressure difference exerts force on the blade so that the runner (rotating part of the turbine) can rotate. Permanent magnets are used to produce magnetic flux. Permanent magnets used are rare-eatrhrod magnet material, neodymium-iron-boron NdFeB with N35 type. The planned generator released is 36.85 V, 500 rpm, 50 hz. This designed water turbine has four blades which cannot change its angle. As for the measurement results produce a voltage of 35.1 V with a manufacturing efficiency of 95 %. Charging the battery voltage must be more than 12 V, therefore the generator must be turned at least 200 rpm with a voltage of 14 V to be used for charging batteries.

Sign in / Sign up

Export Citation Format

Share Document