Structural and Continuum Mechanics Approaches for a 3D Shear Deformable ANCF Beam Finite Element: Application to Static and Linearized Dynamic Examples

2012 ◽  
Vol 8 (2) ◽  
Author(s):  
Karin Nachbagauer ◽  
Peter Gruber ◽  
Johannes Gerstmayr
Keyword(s):  
Finite Element ◽  
Continuum Mechanics ◽  
Three Dimensional ◽  
Nonlinear Problems ◽  
Geometrically Nonlinear ◽  
Finite Element Software ◽  
Rod Theory ◽  
Elastic Forces ◽  
Nonlinear Rod Theory ◽  
Shear Deformable

In the present paper, a three-dimensional shear deformable beam finite element is presented, which is based on the absolute nodal coordinate formulation (ANCF). The orientation of the beam’s cross section is parameterized by means of slope vectors. Both a structural mechanics based formulation of the elastic forces based on Reissner’s nonlinear rod theory, as well as a continuum mechanics based formulation for a St. Venant Kirchhoff material are presented in this paper. The performance of the proposed finite beam element is investigated by the analysis of several static and linearized dynamic problems. A comparison to results provided in the literature, to analytical solutions, and to the solution found by commercial finite element software shows high accuracy and high order of convergence, and therefore the present element has high potential for geometrically nonlinear problems.

Improved Description of Elastic Forces for the Absolute Nodal Coordinate Based Plate Element

2005 ◽  
Author(s):  
Marko K. Matikainen ◽  
Aki M. Mikkola
Keyword(s):  
Finite Element ◽  
Continuum Mechanics ◽  
Absolute Nodal Coordinate Formulation ◽  
Three Dimensional ◽  
Plate Element ◽  
Absolute Nodal Coordinate ◽  
Finite Element Software ◽  
Elastic Forces ◽  
The Absolute ◽  
The Continuum

In this study, the improved description of elastic forces for the absolute nodal coordinate based plate element is introduced. The absolute nodal coordinate formulation, which utilizes global displacements and slope coordinates as nodal variables, can be used in large rotation and deformation dynamic analysis of beam and plate structures. The formulation avoids difficulties that arise when a rotation is interpolated in three-dimensional applications. In the absolute nodal coordinate formulation, a continuum mechanics approach has become the dominating procedure when elastic forces are defined. It has recently been perceived, however, that the continuum mechanics based absolute nodal coordinate elements suffer from serious shortcomings, including Poisson’s locking and poor convergence rate. These problems can be circumvented by modifying the displacement field of a finite element in the definition of elastic forces. This allows the use of the mixed type interpolation technique, leading to accurate and efficient finite element formulations. This approach has been previously applied to two- and three-dimensional absolute nodal coordinate based finite elements. In this study, the improved approach for elastic forces is extended to the absolute nodal coordinate plate element. The introduced plate element is compared in static examples to the continuum mechanics based absolute nodal coordinate plate element, as well as to commercial finite element software.

Structural and Continuum Mechanics Approaches for a 3D Shear Deformable ANCF Beam Finite Element: Application to Buckling and Nonlinear Dynamic Examples

2013 ◽  
Vol 9 (1) ◽  
Author(s):  
Karin Nachbagauer ◽  
Johannes Gerstmayr
Keyword(s):  
Finite Element ◽  
Finite Elements ◽  
Continuum Mechanics ◽  
Degrees Of Freedom ◽  
Mass Matrix ◽  
Finite Element Software ◽  
High Order Convergence ◽  
Dynamics Problems ◽  
Transverse Slope ◽  
Shear Deformable

For the modeling of large deformations in multibody dynamics problems, the absolute nodal coordinate formulation (ANCF) is advantageous since in general, the ANCF leads to a constant mass matrix. The proposed ANCF beam finite elements in this approach use the transverse slope vectors for the parameterization of the orientation of the cross section and do not employ an axial nodal slope vector. The geometric description, the degrees of freedom, and a continuum-mechanics-based and a structural-mechanics-based formulation for the elastic forces of the beam finite elements, as well as their usage in several static problems, have been presented in a previous work. A comparison to results provided in the literature to analytical solution and to the solution found by commercial finite element software shows accuracy and high order convergence in statics. The main subject of the present paper is to show the usability of the beam finite elements in dynamic and buckling applications.

Development of Elastic Forces for a Large Deformation Plate Element Based on the Absolute Nodal Coordinate Formulation

2005 ◽  
Vol 1 (2) ◽  
pp. 103-108 ◽  
Author(s):  
Aki M. Mikkola ◽  
Marko K. Matikainen
Keyword(s):  
Finite Element ◽  
Dynamic Analysis ◽  
Continuum Mechanics ◽  
Absolute Nodal Coordinate Formulation ◽  
Three Dimensional ◽  
Plate Element ◽  
Absolute Nodal Coordinate ◽  
Elastic Forces ◽  
The Absolute ◽  
The Continuum

Dynamic analysis of large rotation and deformation can be carried out using the absolute nodal coordinate formulation. This formulation, which utilizes global displacements and slope coordinates as nodal variables, make it possible to avoid the difficulties that arise when a rotation is interpolated in three-dimensional applications. In the absolute nodal coordinate formulation, a continuum mechanics approach has become the dominating procedure when elastic forces are defined. It has recently been perceived, however, that the continuum mechanics based absolute nodal coordinate elements suffer from serious shortcomings, including Poisson’s locking and poor convergence rate. These problems can be circumvented by modifying the displacement field of a finite element in the definition of elastic forces. This allows the use of the mixed type interpolation technique, leading to accurate and efficient finite element formulations. This approach has been previously applied to two- and three-dimensional absolute nodal coordinate based finite elements. In this study, the improved approach for elastic forces is extended to the absolute nodal coordinate plate element. The introduced plate element is compared in static examples to the continuum mechanics based absolute nodal coordinate plate element, as well as to commercial finite element software. A simple dynamic analysis is performed using the introduced element in order to demonstrate the capability of the element to conserve energy.

Numerical solutions for strain-softening surrounding rock under three-dimensional principal stress condition

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Sheng Yu-ming ◽  
Li Chao ◽  
Xia Ming-yao ◽  
Zou Jin-feng
Keyword(s):  
Finite Element ◽  
Principal Stress ◽  
Stress Condition ◽  
Strain Softening ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Strength Criterion ◽  
Surrounding Rock ◽  
Flow Rule ◽  
Finite Element Software

Abstract In this study, elastoplastic model for the surrounding rock of axisymmetric circular tunnel is investigated under three-dimensional (3D) principal stress states. Novel numerical solutions for strain-softening surrounding rock were first proposed based on the modified 3D Hoek–Brown criterion and the associated flow rule. Under a 3D axisymmetric coordinate system, the distributions for stresses and displacement can be effectively determined on the basis of the redeveloped stress increment approach. The modified 3D Hoek–Brown strength criterion is also embedded into finite element software to characterize the yielding state of surrounding rock based on the modified yield surface and stress renewal algorithm. The Euler implicit constitutive integral algorithm and the consistent tangent stiffness matrix are reconstructed in terms of the 3D Hoek–Brown strength criterion. Therefore, the numerical solutions and finite element method (FEM) models for the deep buried tunnel under 3D principal stress condition are presented, so that the stability analysis of surrounding rock can be conducted in a direct and convenient way. The reliability of the proposed solutions was verified by comparison of the principal stresses obtained by the developed numerical approach and FEM model. From a practical point of view, the proposed approach can also be applied for the determination of ground response curve of the tunnel, which shows a satisfying accuracy compared with the measuring data.

Research on Mesh Optimization of the Finite Element Calculation about Three-Dimensional Foundation Pit

2012 ◽  
Vol 487 ◽  
pp. 855-859
Author(s):  
Shi Lun Feng ◽  
Yu Ming Zhou ◽  
Pu Lin Li ◽  
Jun Li ◽  
Zhi Yong Li ◽  
...  
Keyword(s):  
Finite Element ◽  
Complex Geometry ◽  
Three Dimensional ◽  
Mesh Optimization ◽  
Design Calculation ◽  
Foundation Pit ◽  
3D Design ◽  
Finite Element Software ◽  
Core Language ◽  
Grid Division

Abaqus finite element software can implement three-dimensional excavation design calculation, so authors used Python of Abaqus core language made the 3D design of foundation pit supporting program come ture and also did intensive study of mesh optimization during the process. Authors also did intensive comparison and analysis about grid division of the complex geometry foundation pit, through a regularization partion about a variety of special-shaped pit, we made the automatic division about the structural grid of all kinds of shapes foundation pit successful. On this basis, we achieved better calculation effects of the model. The article will introduce problems about optimization of grid in procedure.

Modeling of Thermoplastic Materials for the Process-Simulation of Press-Fit Interconnections on Moulded Interconnected Devices

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Thomas Fellner ◽  
Elena Zukowski ◽  
Jürgen Wilde ◽  
H. Kück ◽  
H. Richter ◽  
...  
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Base Material ◽  
Creep Model ◽  
Assembly Process ◽  
Temperature Dependent ◽  
Reliability Modeling ◽  
Finite Element Software ◽  
Press Fit ◽  
Temperature Loads

This investigation is aimed at the modeling of both the fabrication process and the reliability of press-fit interconnections on moulded interconnect devices (MID). These are multifunctional three-dimensional substrates, produced by thermoplastic injection moulding for large-series applications. The assembly process and subsequently the durability of press-fit interconnections has been modeled and proved with a finite element software. Especially, a simulation tool for process optimizations was created and applied. In order to obtain realistic results, a creep model for the investigated base material, a liquid-crystal polymer (LCP), was generated and verified by experiments. Required friction coefficients between metal pin and base material were determined by adapting simulations and experiments. Retention forces of pins pressed into substrate holes during as well after the assembly process, and after temperature loads were predicted by simulations. Additionally, the decreasing extraction forces over time due to creep in the thermoplastic base material have been predicted for different storage temperatures as well with finite element analyses. Following, the numerical results of the process and reliability modeling were verified by experiments. It is concluded that the behavior of the mechanical contact of the pin-substrate system, can be suitably described time- and temperature-dependent.

Effect of Pile-Soil-Structure Interaction on the Cable-Stayed Bridge in Response to the Earthquake

2014 ◽  
Vol 539 ◽  
pp. 731-735 ◽  
Author(s):  
Yu Chen
Keyword(s):  
Finite Element ◽  
Seismic Response ◽  
Soil Structure ◽  
Response Spectrum ◽  
Three Dimensional ◽  
Soil Structure Interaction ◽  
Structure Interaction ◽  
Finite Element Software ◽  
Cable Stayed Bridge ◽  
Three Dimensional Finite Element

In this thesis, based on the design of a 140+90m span unusual single tower and single cable plane cable-stayed bridge, free vibration characteristics and seismic response are investigated; three dimensional finite element models of a single tower cable-stayed bridge with and without the pile-soil-structure interaction are established respectively by utilizing finite element software MIDAS/CIVIL, seismic response of Response spectrum and Earthquake schedule are analyzed respectively and compared. By the comparison of the data analysis, for small stiffness span cable-stayed bridge, the pile-soil-structure interaction can not be ignored with calculation and analysis of seismic response.

Finite Element Analysis of the Effect of Surface Hardening Depth in Port Crane Wheel

2011 ◽  
Vol 291-294 ◽  
pp. 3282-3286 ◽  
Author(s):  
Jiang Wei Wu ◽  
Peng Wang
Keyword(s):  
Finite Element ◽  
Surface Hardening ◽  
Three Dimensional ◽  
Element Model ◽  
Contact Stresses ◽  
Numerical Results ◽  
Element Analysis ◽  
Finite Element Software ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

In port crane industry, the surface hardening technique is widely used in order to improve the strength of wheel. But the hardening depth is chosen only by according to the experience, and the effect of different hardened depths is not studied theoretically. In this paper, the contact stresses in wheel with different hardening depth have been analyzed by applying three-dimensional finite element model. Based on this model, the ANSYS10.0 finite element software is used. The elastic wheel is used to verify the numerical results with the Hertz’s theory. Three different hardening depths, namely 10mm, 25mm and whole hardened wheel, under three different vertical loads were applied. The effect of hardening depth of a surface hardened wheel is discussed by comparing the contact stresses and contact areas from the numerical results.

Sign in / Sign up

Export Citation Format

Share Document