Numerical Solution of 3-D Water Entry Problems With a Constrained Interpolation Profile Method

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
Qingyong Yang ◽  
Wei Qiu
Keyword(s):  
Numerical Solutions ◽  
Stokes Equations ◽  
Type Equation ◽  
Water Entry ◽  
Navier Stokes ◽  
Time Step ◽  
Constrained Interpolation ◽  
Navier Stokes Equations ◽  
Highly Nonlinear ◽  
Calm Water

This paper presents the numerical solutions of slamming problems for 3D bodies entering calm water with vertical and oblique velocities. The highly nonlinear water entry problems are governed by the Navier-Stokes equations and were solved by a constrained interpolation profile (CIP)-based finite difference method on a fixed Cartesian grid. In the computation, the 3D CIP method was employed for the advection calculations and a pressure-based algorithm was applied for the nonadvection calculations. The solid body and the free surface interfaces were captured by density functions. For the pressure computation, a Poisson-type equation was solved at each time step by using the conjugate gradient iterative method. Validation studies were carried out for a 3D wedge, a cusped body vertically entering calm water, and the oblique entry of a sphere into calm water. The predicted hydrodynamic forces on the wedge, the cusped body, and the sphere were compared with experimental data.

Computation of Slamming Forces on 3-D Bodies With a CIP Method

2010 ◽  
Author(s):  
Qingyong Yang ◽  
Wei Qiu
Keyword(s):  
Numerical Solutions ◽  
Stokes Equations ◽  
Type Equation ◽  
Navier Stokes ◽  
Cip Method ◽  
Time Step ◽  
Constrained Interpolation ◽  
Navier Stokes Equations ◽  
Highly Nonlinear ◽  
Calm Water

This paper presents the numerical solutions of slamming problems for 3D bodies entering calm water. The highly nonlinear water entry problems are governed by the Navier-Stokes equations and were solved by a Constrained Interpolation Profile (CIP)-based finite difference method on a fixed Cartesian grid. In the computation, the 3D CIP method was employed for the advection calculations and a pressured-based algorithm was applied for non-advection calculations. The solid body and the free surface interfaces were captured by density functions. For the pressure computation, a Poisson-type equation was solved at each time step by the Conjugate Gradient iterative method. Validation studies were carried out for a 3D wedge entering calm water and the entry of a sphere into calm water at both vertical and horizontal velocities. The predicted hydrodynamic forces on the wedge and the sphere were compared with experimental data.

NUMERICAL SOLUTIONS OF 2D AND 3D SLAMMING PROBLEMS

2021 ◽  
Vol 153 (A2) ◽  
Author(s):  
Q Yang ◽  
W Qiu
Keyword(s):  
Free Surface ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Type Equation ◽  
The Body ◽  
Navier Stokes ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Highly Nonlinear ◽  
2D And 3D

Slamming forces on 2D and 3D bodies have been computed based on a CIP method. The highly nonlinear water entry problem governed by the Navier-Stokes equations was solved by a CIP based finite difference method on a fixed Cartesian grid. In the computation, a compact upwind scheme was employed for the advection calculations and a pressure-based algorithm was applied to treat the multiple phases. The free surface and the body boundaries were captured using density functions. For the pressure calculation, a Poisson-type equation was solved at each time step by the conjugate gradient iterative method. Validation studies were carried out for 2D wedges with various deadrise angles ranging from 0 to 60 degrees at constant vertical velocity. In the cases of wedges with small deadrise angles, the compressibility of air between the bottom of the wedge and the free surface was modelled. Studies were also extended to 3D bodies, such as a sphere, a cylinder and a catamaran, entering calm water. Computed pressures, free surface elevations and hydrodynamic forces were compared with experimental data and the numerical solutions by other methods.

scholarly journals Numerical Investigation on the Water Entry of Several Different Bow-Flared Sections

2020 ◽  
Vol 10 (22) ◽  
pp. 7952
Author(s):  
Qiang Wang ◽  
Boran Zhang ◽  
Pengyao Yu ◽  
Guangzhao Li ◽  
Zhijiang Yuan
Keyword(s):  
Stokes Equations ◽  
Water Entry ◽  
Navier Stokes ◽  
Hydrodynamic Characteristics ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Surface Evolution ◽  
Mesh Method ◽  
The Difference ◽  
Dynamics Method

The bow-flared section may be simplified in the prediction of slamming loads and whipping responses of ships. However, the difference of hydrodynamic characteristics between the water entry of the simplified sections and that of the original section has not been well documented. In this study, the water entry of several different bow-flared sections was numerically investigated using the computational fluid dynamics method based on Reynolds-averaged Navier–Stokes equations. The motion of the grid around the section was realized using the overset mesh method. Reasonable grid size and time step were determined through convergence studies. The application of the numerical method in the water entry of bow-flared sections was validated by comparing the present predictions with previous numerical and experimental results. Through a comparative study on the water entry of one original section and three simplified sections, the influences of simplification of the bow-flared section on hydrodynamic characteristics, free surface evolution, pressure field, and impact force were investigated and are discussed here.

A finite element method for the Navier-Stokes equations in moving domain with application to hemodynamics of the left ventricle

2017 ◽  
Vol 32 (4) ◽  
Author(s):  
Alexander Danilov ◽  
Alexander Lozovskiy ◽  
Maxim Olshanskii ◽  
Yuri Vassilevski
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Left Ventricle ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Computed Tomography Images ◽  
Time Dependent Domain ◽  
Element Method

AbstractThe paper introduces a finite element method for the Navier-Stokes equations of incompressible viscous fluid in a time-dependent domain. The method is based on a quasi-Lagrangian formulation of the problem and handling the geometry in a time-explicit way. We prove that numerical solution satisfies a discrete analogue of the fundamental energy estimate. This stability estimate does not require a CFL time-step restriction. The method is further applied to simulation of a flow in a model of the left ventricle of a human heart, where the ventricle wall dynamics is reconstructed from a sequence of contrast enhanced Computed Tomography images.

A numerical study of the interaction between unsteay free-stream disturbances and localized variations in surface geometry

1989 ◽  
Vol 209 ◽  
pp. 285-308 ◽  
Author(s):  
R. J. Bodonyi ◽  
W. J. C. Welch ◽  
P. W. Duck ◽  
M. Tadjfar
Keyword(s):  
Numerical Solutions ◽  
Free Stream ◽  
Stokes Equations ◽  
Numerical Study ◽  
Navier Stokes ◽  
Surface Geometry ◽  
Navier Stokes Equations ◽  
S Waves ◽  
Tollmien Schlichting

A numerical study of the generation of Tollmien-Schlichting (T–S) waves due to the interaction between a small free-stream disturbance and a small localized variation of the surface geometry has been carried out using both finite–difference and spectral methods. The nonlinear steady flow is of the viscous–inviscid interactive type while the unsteady disturbed flow is assumed to be governed by the Navier–Stokes equations linearized about this flow. Numerical solutions illustrate the growth or decay of the T–S waves generated by the interaction between the free-stream disturbance and the surface distortion, depending on the value of the scaled Strouhal number. An important result of this receptivity problem is the numerical determination of the amplitude of the T–S waves.

Subsidence of the Ekofisk Platforms: Wave in Deck Impact Study — Various Wave Models and Computational Methods

2002 ◽  
Author(s):  
Bogdan Iwanowski ◽  
Henrik Grigorian ◽  
Ingar Scherf
Keyword(s):  
Computational Methods ◽  
Stokes Equations ◽  
Type Equation ◽  
Navier Stokes ◽  
Stokes Wave ◽  
Wave Loads ◽  
Wave Impact ◽  
Navier Stokes Equations ◽  
Wave Models ◽  
Displacement Approach

Subsidence of the Ekofisk platforms creates several operational challenges. For safety of the platforms, it is of great importance to find the wave impact loads acting on the platforms’ decks. The paper describes how such loads can be computed. Three theoretical wave models are discussed in the paper: the Airy wave, Airy wave modified through Wheeler stretching and the 5th order non-linear Stokes wave. The wave loads for these wave models are computed by various methods. The method based on momentum displacement approach and Morison-type equation developed by Dr. Kaplan is used as a reference point. The loads are also computed through a solution of complete Navier-Stokes equations, with the Volume of Fluid (VOF) method used to trace motion of the fluid’s free surface. Results of different wave models and different computational methods are compared and discussed.

scholarly journals Spectral Direction Splitting Schemes for the Incompressible Navier-Stokes Equations

2011 ◽  
Vol 1 (3) ◽  
pp. 215-234 ◽  
Author(s):  
Lizhen Chen ◽  
Jie Shen ◽  
Chuanju Xu
Keyword(s):  
Stokes Equations ◽  
Navier Stokes ◽  
Splitting Schemes ◽  
Time Step ◽  
Order Of Accuracy ◽  
Navier Stokes Equations ◽  
Pressure Stabilization ◽  
Legendre Spectral Method ◽  
Direction Splitting ◽  
The Stability

AbstractWe propose and analyze spectral direction splitting schemes for the incompressible Navier-Stokes equations. The schemes combine a Legendre-spectral method for the spatial discretization and a pressure-stabilization/direction splitting scheme for the temporal discretization, leading to a sequence of one-dimensional elliptic equations at each time step while preserving the same order of accuracy as the usual pressure-stabilization schemes. We prove that these schemes are unconditionally stable, and present numerical results which demonstrate the stability, accuracy, and efficiency of the proposed methods.

scholarly journals Fluid-kinetic modelling for respiratory aerosols with variable size and temperature

2020 ◽  
Vol 67 ◽  
pp. 100-119 ◽  
Author(s):  
Laurent Boudin ◽  
Céline Grandmont ◽  
Bérénice Grec ◽  
Sébastien Martin ◽  
Amina Mecherbet ◽  
...  
Keyword(s):  
Stokes Equations ◽  
Kinetic Modelling ◽  
Type Equation ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Aerosol Dynamics ◽  
Convection Diffusion Equation ◽  
Time Marching ◽  
Branched Structure ◽  
The Impact

In this paper, we propose a coupled fluid-kinetic model taking into account the radius growth of aerosol particles due to humidity in the respiratory system. We aim to numerically investigate the impact of hygroscopic effects on the particle behaviour. The air flow is described by the incompressible Navier-Stokes equations, and the aerosol by a Vlasov-type equation involving the air humidity and temperature, both quantities satisfying a convection-diffusion equation with a source term. Conservations properties are checked and an explicit time-marching scheme is proposed. Twodimensional numerical simulations in a branched structure show the influence of the particle size variations on the aerosol dynamics.

Sign in / Sign up

Export Citation Format

Share Document