scholarly journals Modeling of Magnetorheological Fluids by the Discrete Element Method

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Mickaël Kargulewicz ◽  
Ivan Iordanoff ◽  
Victor Marrero ◽  
John Tichy
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Discrete Element Method ◽  
Discrete Element ◽  
Magnetic Interactions ◽  
Time Interval ◽  
Mr Fluid ◽  
Carrier Fluid ◽  
Mr Fluids ◽  
Element Method

Magnetorheological (MR) fluids are fluids whose properties vary in response to an applied magnetic field. Such fluids are typically composed of microscopic iron particles (~1-20μm diameter, 20-40% by volume) suspended in a carrier fluid such as mineral oil or water. MR fluids are increasingly proposed for use in various mechanical system applications, many of which fall in the domain of tribology, such as smart dampers and clutches, prosthetic articulations, and controllable polishing fluids. The goal of this study is to present an overview of the topic to the tribology audience, and to develop an MR fluid model from the microscopic point of view using the discrete element method (DEM), with a long range objective to better optimize and understand MR fluid behavior in such tribological applications. As in most DEM studies, inter-particle forces are determined by a force-displacement law and trajectories are calculated using Newton’s second law. In this study, particle magnetization and magnetic interactions between particles have been added to the discrete element code. The global behavior of the MR fluid can be analyzed by examining the time evolution of the ensemble of particles. Microscopically, the known behavior is observed: particles align themselves with the external magnetic field. Macroscopically, averaging over a number of particles and a significant time interval, effective viscosity increases significantly when an external magnetic field is applied. These preliminary results would appear to establish that the DEM is a promising method to study MR fluids at the microscopic and macroscopic scales as an aid to tribological design.

Magnetorheological Fluids Behaviour in Tension Loading Mode

2008 ◽  
Vol 47-50 ◽  
pp. 242-245 ◽  
Author(s):  
Saiful Amri Mazlan ◽  
Ahmed Issa ◽  
Abdul Ghani Olabi
Keyword(s):  
Magnetic Field ◽  
Tensile Stress ◽  
Magnetic Particles ◽  
Electrical Current ◽  
High Ratio ◽  
Solid Particles ◽  
Mr Fluid ◽  
Carrier Fluid ◽  
Mr Fluids ◽  
Water Based

In this paper, the behaviours of three types of MR fluids under quasi-static loadings in tension mode were investigated. One type of water-based and two types of hydrocarbon-based MR fluids were activated by a magnetic field generated by a coil using a constant value of DC electrical current. Experimental results in terms of stress-strain relationships showed that the MR fluids had distinct unique behaviours during the tension process. A high ratio of solid particles to carrier liquid in the MR fluid is an indication of high magnetic properties. The water-based MR fluid had a relatively large solid-to-liquid ratio. At a given applied current, a significant increase in tensile stress was obtained in this fluid type. On the other hand, the hydrocarbon-based MR fluids had relatively lower solid to liquid ratios, whereby, less increases in tensile stress were obtained. The behaviours of MR fluids were dependent on the relative movement between the solid magnetic particles and the carrier fluid. A complication occurs because, in the presence of a magnetic field, there will be a tendency of the carrier fluid to stick with the magnetic particle

Discrete element method to model cracking for two layer systems

TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 101-108
Author(s):  
Daniel Varney ◽  
Douglas Bousfield
Keyword(s):  
Discrete Element Method ◽  
Flexural Modulus ◽  
Single Layer ◽  
Discrete Element ◽  
Flexural Stress ◽  
Layer System ◽  
Three Point Bending ◽  
Moving Force ◽  
Coating Layers ◽  
Element Method

Cracking at the fold is a serious issue for many grades of coated paper and coated board. Some recent work has suggested methods to minimize this problem by using two or more coating layers of different properties. A discrete element method (DEM) has been used to model deformation events for single layer coating systems such as in-plain and out-of-plain tension, three-point bending, and a novel moving force picking simulation, but nothing has been reported related to multiple coating layers. In this paper, a DEM model has been expanded to predict the three-point bending response of a two-layer system. The main factors evaluated include the use of different binder systems in each layer and the ratio of the bottom and top layer weights. As in the past, the properties of the binder and the binder concentration are input parameters. The model can predict crack formation that is a function of these two sets of factors. In addition, the model can predict the flexural modulus, the maximum flexural stress, and the strain-at-failure. The predictions are qualitatively compared with experimental results reported in the literature.

Discrete element method–computational fluid dynamics analyses of flexible fibre fluidization

2021 ◽  
Vol 910 ◽  
Author(s):  
Yiyang Jiang ◽  
Yu Guo ◽  
Zhaosheng Yu ◽  
Xia Hua ◽  
Jianzhong Lin ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Discrete Element Method ◽  
Discrete Element ◽  
Dynamics Analyses ◽  
Element Method

Abstract

scholarly journals Numerical simulation on coal loading process of shearer drum based on discrete element method

2021 ◽  
pp. 014459872110135
Author(s):  
Zhen Tian ◽  
Shuangxi Jing ◽  
Lijuan Zhao ◽  
Wei Liu ◽  
Shan Gao
Keyword(s):  
Numerical Simulation ◽  
Discrete Element Method ◽  
Loading Rate ◽  
Low Cost ◽  
Element Model ◽  
Discrete Element ◽  
Helix Angle ◽  
Loading Process ◽  
Coal Particles ◽  
Element Method

The drum is the working mechanism of the coal shearer, and the coal loading performance of the drum is very important for the efficient and safe production of coal mine. In order to study the coal loading performance of the shearer drum, a discrete element model of coupling the drum and coal wall was established by combining the results of the coal property determination and the discrete element method. The movement of coal particles and the mass distribution in different areas were obtained, and the coal particle velocity and coal loading rate were analyzed under the conditions of different helix angles, rotation speeds, traction speeds and cutting depths. The results show that with the increase of helix angle, the coal loading first increases and then decreases; with the increase of cutting depth and traction speed, the coal loading rate decreases; the increase of rotation speed can improve the coal loading performance of drum to a certain extent. The research results show that the discrete element numerical simulation can accurately reflect the coal loading process of the shearer drum, which provides a more convenient, fast and low-cost method for the structural design of shearer drum and the improvement of coal loading performance.

Sign in / Sign up

Export Citation Format

Share Document