scholarly journals Study and Analysis of Anti Vibratory Passive and Active Methods Applied to Complex Mechanical System

2012 ◽  
Vol 7 (2) ◽  
Author(s):  
Cédric Lopez ◽  
François Malburet ◽  
André Barraco
Keyword(s):  
Experimental Study ◽  
Comparative Analysis ◽  
Mechanical System ◽  
High Speed ◽  
Test Bench ◽  
Minimization Method ◽  
Controlled System ◽  
Proper Frequency ◽  
Different Parts ◽  
Methods Of Control

This paper studies problematic of a mechanical system composed of different coupled parts submitted to a high speed shock and proposes analysis of anti vibratory passive and active methods based on an experimental and theoretical coupled approach. After a shock, different parts of the system oscillate. If one of them is excited at a particular frequency, such as its proper frequency, important oscillations appear and can lead to the deterioration of the system by introducing important stresses. In this paper, we propose an analysis in order to understand this kind of problem and what we can do to avoid it. Firstly, we discuss problematic and we expose the studied system. In a second time, we develop two approaches of modeling that allow us to understand the phenomenon by carrying out numerical simulations. Then cross checking of model is completed via experimental study on drop test bench. Passive minimization method of vibrations based on experimental and theoretical coupled approach is exposed. Finally, a comparative analysis of different methods of control and experimental results of controlled system are presented.

Analysis of Anti Vibratory Passive and Active Methods Applied to Complex Mechanical System

2007 ◽  
Author(s):  
Ce´dric Lopez ◽  
Franc¸ois Malburet ◽  
Andre` Barraco
Keyword(s):  
Experimental Study ◽  
Comparative Analysis ◽  
Numerical Simulations ◽  
Mechanical System ◽  
High Speed ◽  
Test Bench ◽  
Minimization Method ◽  
Proper Frequency ◽  
Different Parts ◽  
Methods Of Control

This paper studies problematic of a mechanical system composed of different coupled parts submitted to a high speed shock and proposes analysis of anti vibratory passive and active methods based on an experimental and theoretical coupled approach. After a shock, different parts of the system oscillate. If one of them is excited at a particular frequency, such as its proper frequency, important oscillations appear and can lead to the deterioration of the system by introducing important stresses. In this paper, we propose an analysis in order to understand this kind of problem and what we can do to avoid it. Firstly we discuss problematic and we expose the studied system. In a second time, we develop two approaches of modeling that allow us to understand the phenomenon by carrying out numerical simulations. Then cross checking of model is completed via experimental study on drop test bench. Passive minimization method of vibrations based on experimental and theoretical coupled approach is exposed. Finally a comparative analysis of different methods of control is presented.

A simulation apparatus for the experimental study of batch reactor control methods

1986 ◽  
Vol 51 (6) ◽  
pp. 1259-1267
Author(s):  
Josef Horák ◽  
Petr Beránek
Keyword(s):  
Experimental Study ◽  
Closed Loop ◽  
Dynamic Properties ◽  
Batch Reactor ◽  
Exothermic Reaction ◽  
Electric Heating ◽  
Batch Reactors ◽  
Exchange Area ◽  
The Stability ◽  
Methods Of Control

A simulation apparatus for the experimental study of the methods of control of batch reactors is devised. In this apparatus, the production of heat by an exothermic reaction is replaced by electric heating controlled by a computer in a closed loop; the reactor is cooled with an external cooler whose dynamic properties can be varied while keeping the heat exchange area constant. The effect of the cooler geometry on its dynamic properties is investigated and the effect of the cooler inertia on the stability and safety of the on-off temperature control in the unstable pseudostationary state is examined.

Experimental study on laminated glass responses of high-speed trains subject to windblown sand particles loading

2021 ◽  
Vol 300 ◽  
pp. 124332
Author(s):  
Gongxun Deng ◽  
Wen Ma ◽  
Yong Peng ◽  
Shiming Wang ◽  
Song Yao ◽  
...  
Keyword(s):  
Experimental Study ◽  
High Speed ◽  
Laminated Glass ◽  
Windblown Sand ◽  
High Speed Trains ◽  
Sand Particles

Experimental Study of Turbulent Macroinstabilities in an Agitated System with Axial High-Speed Impeller and with Radial Baffles

1996 ◽  
Vol 61 (6) ◽  
pp. 856-867 ◽  
Author(s):  
Oldřich Brůha ◽  
Ivan Fořt ◽  
Pavel Smolka ◽  
Milan Jahoda
Keyword(s):  
Experimental Study ◽  
Flow Field ◽  
High Speed ◽  
Experimental Results ◽  
Turbulent Regime ◽  
Frequency Of Occurrence ◽  
Visualization Method ◽  
Entire Flow

The frequency of turbulent macroinstability occurrence was measured in liquids agitated in a cylindrical baffled vessel. As it has been proved by preceding experimental results of the authors, the stochastic quantity with frequency of occurrence of 10-1 to 100 s-1 is concerned. By suitable choosing the viscosity of liquids and frequency of impeller revolutins, the region of Reynolds mixing numbers was covered from the pure laminar up to fully developed turbulent regime. In addition to the equipment making it possible to record automatically the macroinstability occurrence, also the visualization method and videorecording were employed. It enabled us to describe in more detail the form of entire flow field in the agitated system and its behaviour in connection with the macroinstability occurrence. It follows from the experiments made that under turbulent regime of flow of agitated liquids the frequency of turbulent macroinstability occurrence is the same as the frequency of the primary circulation of agitated liquid.

Research on Internet-Based Reconfigurable Distance Mechanical System Fault Diagnosis

2011 ◽  
Vol 52-54 ◽  
pp. 109-114
Author(s):  
Yun Jie Xu
Keyword(s):  
Fault Diagnosis ◽  
Mechanical System ◽  
High Speed ◽  
Structural Model ◽  
Component Technology ◽  
The Internet ◽  
Diagnostic Systems ◽  
Diagnosis System ◽  
J2ee Framework ◽  
Fault Diagnosis System

In order to meet requirements of increasingly high-speed, large and intelligent mechanical equipments on fault diagnosis, the Internet-based reconfigurable mechanical system fault diagnosis program was presented. The overall structure and networking schema of distance mechanical fault diagnosis system were analyzed, and the distance fault diagnosis network model based on J2EE framework was also described. The structural model and reconfigurable manner of the reconfigurable distance diagnosis system was provided, which used CORBA component technology to achieve reconfiguration. The detail steps of system that take some type of diesel engine as diagnosis object was described, and the intelligent diagnosing methods were also researched. The Internet-based fault diagnosis technology effectively improves the efficiency and accuracy of diagnostic systems.

Sign in / Sign up

Export Citation Format

Share Document