Contact Characteristics of Recess Action Worm Gear Drives With Double-Depth Teeth

2011 ◽  
Vol 133 (11) ◽  
Author(s):  
Wei-Liang Chen ◽  
Chung-Biau Tsay
Keyword(s):  
Worm Gear ◽  
Surface Topology ◽  
Design Parameters ◽  
Kinematic Error ◽  
Contact Ratio ◽  
Tooth Contact Analysis ◽  
Gear Drive ◽  
Contact Patterns ◽  
Bearing Contact ◽  
Gear Drives

Based on the previously developed mathematical model of a series of recess action (RA) worm gear drive (i.e., semi RA, full RA, and standard proportional tooth types) with double-depth teeth, the tooth contact analysis (TCA) technique is utilized to investigate the kinematic error (KE), contact ratio (CR), average contact ratio (ACR), instantaneous contact teeth (ICT) under different assembly conditions. Besides, the bearing contact and contact ellipse are studied by applying the surface topology method. Three numerical examples are presented to demonstrate the influence of the assembly errors and design parameters of the RA worm gear drive on the KE, CR, ACR, ICT, and contact patterns.

The Design, Generation, and Simulation of Meshing of Worm-Gear Drive With Longitudinally Localized Contacts

2000 ◽  
Vol 122 (2) ◽  
pp. 201-206 ◽  
Author(s):  
I. H. Seol
Keyword(s):  
Computer Program ◽  
Longitudinal Direction ◽  
Worm Gear ◽  
Contact Ratio ◽  
Transmission Errors ◽  
Gear Drive ◽  
Bearing Contact ◽  
Design Generation ◽  
Gear Drives

The design and simulation of meshing of a single enveloping worm-gear drive with a localized bearing contact is considered. The bearing contact has a longitudinal direction and two branches of contact path. The purpose of localization is to reduce the sensitivity of the worm-gear drive to misalignment. The author’s approach for localization of bearing contact is based on the proper mismatch of the surfaces of the hob and drive worm. The developed computer program allows the investigation of the influence of misalignment on the shift of the bearing contact and the determination of the transmission errors and the contact ratio. The developed approach has been applied for K type of single-enveloping worm-gear drives and the developed theory is illustrated with a numerical example. [S1050-0472(00)00502-X]

Computerized Design of Worm Gear Drives With Improved Conditions of Meshing and Bearing Contact

2006 ◽  
Author(s):  
Ignacio Gonzalez-Perez ◽  
Alfonso Fuentes ◽  
Faydor L. Litvin ◽  
Kenichi Hayasaka ◽  
Kenji Yukishima
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Worm Gear ◽  
Tooth Surface ◽  
Tooth Contact Analysis ◽  
Parabolic Profile ◽  
Gear Drive ◽  
Bearing Contact ◽  
Basic Ideas ◽  
Gear Drives

A new geometry of a cylindrical worm gear drive is proposed for: (i) reduction of sensitivity of the drive to errors of alignment, and (ii) observation of a favorable bearing contact. The basic ideas of new geometry are as follows: (i) the worm-gear is generated by a hob that is oversized in comparison with the worm of the drive and has a parabolic profile in normal section; (ii) the tooth surface of the worm of the drive is a conventional one. Due to deviation of the hob thread surface, the bearing contact of the worm and the worm-gear is localized. Reduction of sensitivity to misalignment and improved conditions of meshing are confirmed by application of TCA (Tooth Contact Analysis). Formation of bearing contact has been investigated by finite element method applied in 3D for more than one pair of contacting teeth. Developed ideas may be applied for various types of cylindrical worm gear drives.

Geometry and Investigation of Klingelnberg-Type Worm Gear Drive

2006 ◽  
Vol 129 (1) ◽  
pp. 17-22 ◽  
Author(s):  
Faydor L. Litvin ◽  
Kenji Yukishima ◽  
Kenichi Hayasaka ◽  
Ignacio Gonzalez-Perez ◽  
Alfonso Fuentes
Keyword(s):  
Contact Analysis ◽  
Worm Gear ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Numerical Examples ◽  
Gear Drive ◽  
Bearing Contact ◽  
Design Generation ◽  
Gear Drives

The computerized design, generation, and tooth contact analysis of a Klingelnberg-type cylindrical worm gear drive is considered wherein localization of contact is obtained by application of an oversized hob and mismatch geometries of hob and worm of the drive. A computerized approach for the determination of contacting surfaces and the investigation of their meshing and contact by tooth contact analysis is presented. The developed theory results in an improvement of bearing contact and reduction of sensitivity to misalignment. The theory is illustrated with numerical examples and may be applied for other types of cylindrical worm gear drives.

Contact Characteristics of Circular-Arc Curvilinear Tooth Gear Drives

2009 ◽  
Vol 131 (8) ◽  
Author(s):  
Yi-Cheng Wu ◽  
Kuan-Yu Chen ◽  
Chung-Biau Tsay ◽  
Yukinori Ariga
Keyword(s):  
Contact Analysis ◽  
Surface Topology ◽  
Contact Ratio ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Circular Arc ◽  
Numerical Examples ◽  
Gear Drive ◽  
Tooth Gear ◽  
Gear Drives

In this paper, the circular-arc curvilinear tooth gear drive is proposed. The gear and pinion tooth surfaces are generated by two complemented circular-arc rack cutters with curvilinear tooth-traces. According to the theory of gearing, the mathematical model of the proposed gear is developed. The tooth contact analysis technique is utilized to investigate the kinematical errors of circular-arc curvilinear tooth gear drives under different assembly errors. Contact patterns of the circular-arc curvilinear tooth gear drive are simulated by the developed computer-aided tooth contact analysis programs and surface topology method. Numerical examples are presented to show the kinematical errors of the circular-arc curvilinear tooth gear set under different assembly conditions. Relations among the circular-arc tooth profile, curvilinear tooth-trace, contact ratio, contact pattern, and kinematical error are also demonstrated by numerical examples.

Computerized Design, Generation and Simulation of Meshing and Contact of Modified Flender Worm-Gear Drives

1996 ◽  
Author(s):  
I. H. Seol ◽  
Faydor L. Litvin
Keyword(s):  
Gear Tooth ◽  
Worm Gear ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Gear Drive ◽  
Bearing Contact ◽  
Tooth Surfaces ◽  
Design Generation ◽  
Computerized Simulation ◽  
Gear Drives

Abstract The worm and worm-gear tooth surfaces of existing design of Flender gear drive are in line contact at every instant and the gear drive is very sensitive to misalignment. Errors of alignment cause the shift of the bearing contact and transmission errors. The authors propose : (1) Methods for computerized simulation of meshing and contact of misaligned worm-gear drives of existing design (2) Methods of modification of geometry of worm-gear drives that enable to localize and stabilize the bearing contact and reduce the sensitivity of drives to misalignment (3) Methods for computerized simulation of meshing and contact of worm-gear drives with modified geometry The proposed approach was applied as well for the involute (David Brown) and Klingelnberg type of worm-gear drives. Numerical examples that illustrate the developed theory are provided.

scholarly journals Stresses Analysis of Roller Gear Drive

2021 ◽  
Vol 2141 (1) ◽  
pp. 012001
Author(s):  
Zih-Chun Dai
Keyword(s):  
Power Efficiency ◽  
Industrial Applications ◽  
Worm Gear ◽  
Heavy Duty ◽  
Contact Ratio ◽  
Optimization Scheme ◽  
Gear Drive ◽  
High Reduction ◽  
And Performance ◽  
Gear Drives

Abstract The roller worm gear drives have been widely adopted in numerous industrial applications such as robot joint reducer, heavy-duty production line. This study is to improve the performance of a roller gear drive by utilizing an iterative optimization scheme to improve the tooth profile of the hourglass worm gear in the roller gear drive. Dedicated design of the variable-pitch slot on the hourglass worm gear can remedy the power efficiency of the roller gear drive by enhancing the contact ratio dramatically. This research showed that the roller gear drive is a better mechanism for the high reduction ratio reducers. The CAD design and performance analysis of a roller gear drive by SolidWorks have provided the engineers an optimizing methodology.

Computerized Design and Generation of Worm Gear Drives with Stable Bearing Contact and Low Transmission Errors

1999 ◽  
Vol 121 (4) ◽  
pp. 573-578 ◽  
Author(s):  
M. De Donno ◽  
F. L. Litvin
Keyword(s):  
Low Noise ◽  
Worm Gear ◽  
Force Transmission ◽  
New Approach ◽  
Transmission Errors ◽  
Gear Drive ◽  
Bearing Contact ◽  
Computerized Simulation ◽  
Gear Drives ◽  
Favorable Conditions

The authors propose a new approach for design and generation of low-noise, stable bearing contact gear drive with cylindrical worm. The approach is based on application of an oversized hob and varied plunging of worm generating tool. It is discovered that without plunging positive transmission errors occur (that are unacceptable for favorable conditions of force transmission). A predesigned parabolic function is provided that is able to absorb transmission errors caused by misalignment and reduce the level of vibrations, especially in the case of application of multi-thread worms. The developed approach is tested by computerized simulation of meshing and contact by the developed computer program. The investigation is accomplished for a worm-gear drive with the Klingelnberg type of the worm that is ground by a circular cone, but the proposed approach may be applied for other types of worm gear drives with cylindrical worms.

Designing and loaded tooth contact analysis of an Archimedean worm gear drive focusing for the connecting teeth of the worm wheel by loaded torques

2020 ◽  
Vol 21 (4) ◽  
pp. 405
Author(s):  
Sándor Bodzás
Keyword(s):  
Main Property ◽  
Worm Gear ◽  
Tooth Contact Analysis ◽  
Normal Deformation ◽  
Gear Drive ◽  
Contact Points ◽  
Worm Wheel ◽  
Loaded Tooth Contact Analysis ◽  
Gear Drives

The cylindrical worm gear drives are widely used in different mechanical construction such as in the vehicle industry, the robotics, the medical appliances etc. The main property of them is the perpendicular and space bypass axes arrangement. Quite high transmission ratio could be achieved because of the high number of teeth of the worm-wheel and a little number of threads of the worm. More teeth are connected on the worm-wheel at the same time that is why higher loads and power could be transferred. In this research an Archimedean type cylindrical worm gear drive was designed. After the determination of the geometric parameters the computer-aided models were created for the LTCA analysis. Knowing of the kinematic motions of the elements the contact points of the wrapping surfaces could be determined by mathematical way. The necessary coordinate system's arrangements and matrixes were also determined. Different torques were applied during the LTCA. The changing of the distribution of the normal stress and normal deformation into different directions was followed on each connecting tooth of the worm-wheel by the torques. Based on the results consequences were determined by the created diagrams which contain the torques and the analysed mechanical parameter for each tooth.

Optimum Tooth-Surface Modification for Axis-Displaced Worm-Gear Drive With Cylindrical ZA Worm

2007 ◽  
Author(s):  
Takashi Matsuda ◽  
Motohiro Sato ◽  
Satoshi Matsui
Keyword(s):  
Surface Modification ◽  
Relative Motion ◽  
Worm Gear ◽  
Tooth Surface ◽  
Design System ◽  
Gear Drive ◽  
Bearing Contact ◽  
Maximum Tolerance ◽  
Gear Drives ◽  
Tooth Surface Modification

Gear drives, which have larger misalignment than the maximum tolerance of misalignment for gear drives with parallel axes in the Standard of Japanese Gear Manufacture’s Association (JGMA Standard 114-02), are designated as axis-displaced gear drives in this study. So, axis-displacement is used in place of the misalignment. In this study, design system of optimum tooth-surface modification is developed for axis-displaced worm-gear drives with cylindrical ZA worm, which is sensitive to gear misalignments, to reduce the sensitivity to misalignment and to provide the high productivity and reliability. The system is composed by; (1) Axis-displaced wheel tooth-surface is defined as the envelope of worm tooth-surface family in their regular motion transmission (zero transmission error) under an axis-displacement. (2) Basic wheel tooth-surface is built by combining the axis-displaced tooth-surfaces under various axis-displacements. (3) Rack, whose pitch plane rolls on pitch cylinder of wheel, is introduced and then basic rack tooth-surface is obtained as the envelope of the basic wheel tooth-surface family in their regular relative motion. (4) It is illustrated how to get optimum rack tooth-surface from the basic rack tooth-surface. (5) Optimum wheel tooth-surface is generated as the envelope of the optimum rack tooth-surface family in their regular relative motion. (6) The performances of the axis-displaced worm-gear drive having the optimum wheel tooth-surface are analyzed by TCA (Tooth Contact Analysis) program which is developed for analysis of meshing and tooth bearing contact. The above-mentioned system is illustrated with its application for testing worm-gear drive. As a result, it is presented that the system can provide the testing worm-gear drive favorable tooth bearing contact and motion transmission, even in the maximum tolerance of misalignment in JGMA Standard 114-02.

Application and Investigation of Modified Helical Gears With Several Types of Geometry

2007 ◽  
Author(s):  
Ignacio Gonzalez-Perez ◽  
Alfonso Fuentes ◽  
Faydor L. Litvin ◽  
Kenichi Hayasaka ◽  
Kenji Yukishima
Keyword(s):  
Gear Tooth ◽  
Tooth Surface ◽  
Contact Ratio ◽  
Tooth Contact Analysis ◽  
Helical Gears ◽  
Transmission Errors ◽  
Advantages And Disadvantages ◽  
Bearing Contact ◽  
Tooth Surfaces ◽  
Gear Drives

Involute helical gears with modified geometry for transformation of rotation between parallel axes are considered. Three types of topology of geometry are considered: (1) crowning of pinion tooth surface is provided only partially by application of a grinding disk; (2) double crowning of pinion tooth surface is obtained applying a grinding disk; (3) concave-convex pinion and gear tooth surfaces are provided (similar to Novikov-Wildhaber gears). Localization of bearing contact is provided for all three types of topology. Computerized TCA (Tooth Contact Analysis) is performed for all three types of topology to obtain: (i) path of contact on pinion and gear tooth surfaces; (ii) negative function of transmission errors for misaligned gear drives (that allows the contact ratio to be increased). Stress analysis is performed for the whole cycle of meshing. Finite element models of pinion and gear with several pairs of teeth are applied. A relative motion is imposed to the pinion model that allows friction between contact surfaces to be considered. Numerical examples have confirmed the advantages and disadvantages of the applied approaches for generation and design.

Sign in / Sign up

Export Citation Format

Share Document