scholarly journals Characterizing Heterogeneous Properties of Cerebral Aneurysms With Unknown Stress-Free Geometry: A Precursor to In Vivo Identification

2011 ◽  
Vol 133 (5) ◽  
Author(s):  
Xuefeng Zhao ◽  
Madhavan L. Raghavan ◽  
Jia Lu
Keyword(s):  
Inverse Analysis ◽  
Cerebral Aneurysms ◽  
Strain Energy Function ◽  
Metric Tensor ◽  
Tissue Properties ◽  
Material Parameters ◽  
Biomechanical Behavior ◽  
Aneurysm Wall ◽  
Nodal Displacements

Knowledge of elastic properties of cerebral aneurysms is crucial for understanding the biomechanical behavior of the lesion. However, characterizing tissue properties using in vivo motion data presents a tremendous challenge. Aside from the limitation of data accuracy, a pressing issue is that the in vivo motion does not expose the stress-free geometry. This is compounded by the nonlinearity, anisotropy, and heterogeneity of the tissue behavior. This article introduces a method for identifying the heterogeneous properties of aneurysm wall tissue under unknown stress-free configuration. In the proposed approach, an accessible configuration is taken as the reference; the unknown stress-free configuration is represented locally by a metric tensor describing the prestrain from the stress-free configuration to the reference configuration. Material parameters are identified together with the metric tensor pointwisely. The paradigm is tested numerically using a forward-inverse analysis loop. An image-derived sac is considered. The aneurysm tissue is modeled as an eight-ply laminate whose constitutive behavior is described by an anisotropic hyperelastic strain-energy function containing four material parameters. The parameters are assumed to vary continuously in two assigned patterns to represent two types of material heterogeneity. Nine configurations between the diastolic and systolic pressures are generated by forward quasi-static finite element analyses. These configurations are fed to the inverse analysis to delineate the material parameters and the metric tensor. The recovered and the assigned distributions are in good agreement. A forward verification is conducted by comparing the displacement solutions obtained from the recovered and the assigned material parameters at a different pressure. The nodal displacements are found in excellent agreement.

Estimation of the distributions of anisotropic, elastic properties and wall stresses of saccular cerebral aneurysms by inverse analysis

2008 ◽  
Vol 464 (2092) ◽  
pp. 807-825 ◽  
Author(s):  
Martin Kroon ◽  
Gerhard A Holzapfel
Keyword(s):  
Elastic Properties ◽  
Inverse Analysis ◽  
Error Function ◽  
Cerebral Aneurysms ◽  
Structural Parameter ◽  
Constitutive Behaviour ◽  
Estimation Model ◽  
Collagen Fibres ◽  
Element Discretization ◽  
Aneurysm Wall

A new method is proposed for estimating the elastic properties of the inhomogeneous and anisotropic structure of saccular cerebral aneurysms by inverse analysis. The aneurysm is modelled as a membrane and the constitutive response of each individual layer of the passive tissue is characterized by a transversely isotropic strain energy function of exponential type. The collagen fibres in the aneurysm wall are assumed to govern the mechanical response. Four parameters characterize the constitutive behaviour of the tissue: two initial stiffnesses of the collagen fabric in the two in-plane principal directions, one parameter describing the degree of nonlinearity that the collagen fibres exhibit and the other structural parameter, i.e. the angle which defines the orientation of the collagen fibres. The parameter describing the fibre nonlinearity is assumed to be constant, while all others are assumed to vary continuously over the aneurysm surface. Two model aneurysms, with the same initial geometry, boundary and loading conditions, constitutive behaviour and finite-element discretization, are defined: a ‘reference model’ with known distributions of material and structural properties and an ‘estimation model’ whose properties are to be estimated. An error function is defined quantifying the deviations between the deformations from the reference and the estimation models. The error function is minimized with respect to the unknown parameters in the estimation model, and in this way the reference parameter distributions are re-established. In order to achieve a robust parameter estimation, a novel element partition method is employed. The accordance between the estimated and the reference distributions is satisfactory. The deviations of the maximum stress distributions between the two models are below 1%. Consequently, the wall stresses in the cerebral aneurysm estimated by inverse analysis are accurate enough to facilitate the assessment of the risk of aneurysm rupture.

Hemodynamics of Elastase-Induced Aneurysms in Rabbit: A New High Flow Bifurcation Model

2011 ◽  
Author(s):  
Zijing Zeng ◽  
David F. Kallmes ◽  
Yong Hong Ding ◽  
Ramanathan Kadirvel ◽  
Debra A. Lewis ◽  
...  
Keyword(s):  
Animal Models ◽  
Pathological Condition ◽  
Cerebral Arteries ◽  
Cerebral Aneurysms ◽  
Vascular Wall ◽  
Patient Specific ◽  
Aneurysm Wall ◽  
Risk Of Rupture ◽  
The Impact

An intracranial aneurysm (IA) is a pathological condition of cerebral arteries characterized by local enlargements of the arterial wall, typically into a saccular shape. Rupture of the aneurysm sac can result in devastating cerebral hemorrhage. Hemodynamic factors are believed to play an important role in initiation, development and rupture of IAs [1–3]. However, the coupling between hemodynamics and aneurysm pathophysiology is complex and remains poorly understood. Patient specific diagnostics regarding risk of rupture can be substantially advanced by improving our understanding of the in-vivo response of the aneurysm wall to intra-saccular hemodynamic stresses. A mechanism for fundamental studies of the impact of chronically altered WSS on the intact vascular wall is provided by animal models. However, cerebral aneurysms have not been shown to occur naturally in animals. Thus, a number of animal models have been created for studying aneurysm pathogenesis including those in mice, rats, rabbits, canines, swine and primates. To make meaningful use of these models, it is important to evaluate their relevance to human biomechanics and pathophysiology.

scholarly journals Morphological and Hemodynamic Changes during Cerebral Aneurysm Growth

2021 ◽  
Vol 11 (4) ◽  
pp. 520
Author(s):  
Emily R. Nordahl ◽  
Susheil Uthamaraj ◽  
Kendall D. Dennis ◽  
Alena Sejkorová ◽  
Aleš Hejčl ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Kinetic Energy ◽  
Swirling Flow ◽  
Morphological Changes ◽  
Cerebral Aneurysms ◽  
Patient Specific ◽  
Aneurysm Wall ◽  
Aneurysm Growth ◽  
Computational Fluid Dynamics Cfd

Computational fluid dynamics (CFD) has grown as a tool to help understand the hemodynamic properties related to the rupture of cerebral aneurysms. Few of these studies deal specifically with aneurysm growth and most only use a single time instance within the aneurysm growth history. The present retrospective study investigated four patient-specific aneurysms, once at initial diagnosis and then at follow-up, to analyze hemodynamic and morphological changes. Aneurysm geometries were segmented via the medical image processing software Mimics. The geometries were meshed and a computational fluid dynamics (CFD) analysis was performed using ANSYS. Results showed that major geometry bulk growth occurred in areas of low wall shear stress (WSS). Wall shape remodeling near neck impingement regions occurred in areas with large gradients of WSS and oscillatory shear index. This study found that growth occurred in areas where low WSS was accompanied by high velocity gradients between the aneurysm wall and large swirling flow structures. A new finding was that all cases showed an increase in kinetic energy from the first time point to the second, and this change in kinetic energy seems correlated to the change in aneurysm volume.

A Hybrid Coil/Polymer Device for Occlusion of Cerebral Aneurysms

2009 ◽  
Vol 3 (4) ◽  
Author(s):  
Fangmin Xu ◽  
Kevin Hart ◽  
Claire E. Flanagan ◽  
John C. Nacker ◽  
Roham Moftakhar ◽  
...  
Keyword(s):  
Cerebral Aneurysms ◽  
In Vitro Models ◽  
In Vivo Studies ◽  
Polymer Shell ◽  
Device Implantation ◽  
Occlusion Device ◽  
Aneurysm Occlusion ◽  
Aneurysm Model

The treatment of cerebral aneurysms is frequently accomplished via endovascular delivery of metal coils in order to occlude the aneurysm and prevent rupture. This procedure involves imprecise packing of large lengths of wire into the aneurysm and often results in high rates of aneurysm recanalization. Over time, this incomplete aneurysm occlusion can lead to aneurysm enlargement, which may have fatal consequences. This report describes the fabrication and preliminary testing of a novel aneurysm occlusion device composed of a single metal coil surrounded by a biocompatible polymer shell. These coil-in-shell devices were tested under flow conditions in synthetic in vitro models of saccular aneurysms and deployed in vivo in a short-term porcine aneurysm model to study occlusion efficacy. A single nickel titanium shape memory wire was used to deploy a biocompatible, elastic polymeric shell, leading to aneurysmal sac filling in both in vitro and in vivo aneurysm models. The deployment of this coil-in-shell device in synthetic aneurysm models in vitro resulted in varying degrees of aneurysm occlusion, with less than 2% of trials resulting in significant leakage of fluid into the aneurysm. Meanwhile, in vivo coil-in-shell device implantation in a porcine aneurysm model provided proof-of-concept for successful occlusion, as both aneurysms were completely occluded by the devices. Both in vitro and in vivo studies demonstrated that this coil-in-shell device may be attractive as an alternative to traditional coil embolization methods in some cases, allowing for a more precise and controlled aneurysm occlusion.

Bioprinted Nanoparticles for Tissue Engineering Applications

2009 ◽  
Author(s):  
Kivilcim Buyukhatipoglu ◽  
Robert Chang ◽  
Wei Sun ◽  
Alisa Morss Clyne
Keyword(s):  
Tissue Engineering ◽  
Tissue Growth ◽  
Bioactive Components ◽  
Engineering Applications ◽  
Tissue Properties ◽  
Native Tissue ◽  
3D Architecture

Tissue engineering may require precise patterning of cells and bioactive components to recreate the complex, 3D architecture of native tissue. However, it is difficult to image and track cells and bioactive factors once they are incorporated into the tissue engineered construct. These bioactive factors and cells may also need to be moved during tissue growth in vitro or after implantation in vivo to achieve the desired tissue properties, or they may need to be removed entirely prior to implantation for biosafety concerns.

scholarly journals Cure Kinetics and Inverse Analysis of Epoxy-Amine Based Adhesive Used for Fastening Systems

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3853
Author(s):  
Bilen Emek Abali ◽  
Michele Zecchini ◽  
Gilda Daissè ◽  
Ivana Czabany ◽  
Wolfgang Gindl-Altmutter ◽  
...  
Keyword(s):  
Inverse Analysis ◽  
Building Materials ◽  
Cure Kinetics ◽  
Accurate Estimation ◽  
Curing Process ◽  
Degree Of Cure ◽  
Material Parameters ◽  
Epoxy Amine ◽  
Thermosetting Polymers ◽  
Material Equation

Thermosetting polymers are used in building materials, for example adhesives in fastening systems. They harden in environmental conditions with a daily temperature depending on the season and location. This curing process takes hours or even days effected by the relatively low ambient temperature necessary for a fast and complete curing. As material properties depend on the degree of cure, its accurate estimation is of paramount interest and the main objective in this work. Thus, we develop an approach for modeling the curing process for epoxy based thermosetting polymers. Specifically, we perform experiments and demonstrate an inverse analysis for determining parameters in the curing model. By using calorimetry measurements and implementing an inverse analysis algorithm by using open-source packages, we obtain 10 material parameters describing the curing process. We present the methodology for two commercial, epoxy based products, where a statistical analysis provides independence of material parameters leading to the conclusion that the material equation is adequately describing the material response.

scholarly journals Suitability of diffusion approximation for an inverse analysis of diffuse reflectance spectra from human skin in vivo

OSA Continuum ◽  
2019 ◽  
Vol 2 (3) ◽  
pp. 905 ◽  
Author(s):  
Peter Naglič ◽  
Luka Vidovič ◽  
Matija Milanič ◽  
Lise L. Randeberg ◽  
Boris Majaron
Keyword(s):  
Human Skin ◽  
Diffusion Approximation ◽  
Inverse Analysis ◽  
Diffuse Reflectance ◽  
Reflectance Spectra ◽  
Diffuse Reflectance Spectra

scholarly journals On the recovery of the stress-free configuration of the human cornea

2020 ◽  
Vol 2 (4) ◽  
pp. 11-33
Author(s):  
Anna Pandolfi ◽  
Andrea Montanino
Keyword(s):  
Numerical Simulations ◽  
Inverse Analysis ◽  
Material Model ◽  
Free State ◽  
Human Cornea ◽  
Material Models ◽  
Material Parameters ◽  
Optimal Values ◽  
Stress Free State ◽  
Actual Stress

Purpose: The geometries used to conduct numerical simulations of the biomechanics of the human cornea are reconstructed from images of the physiological configuration of the system, which is not in a stress-free state because of the interaction with the surrounding tissues. If the goal of the simulation is a realistic estimation of the mechanical engagement of the system, it is mandatory to obtain a stress-free configuration to which the external actions can be applied. Methods: Starting from a unique physiological image, the search of the stress-free configuration must be based on methods of inverse analysis. Inverse analysis assumes the knowledge of one or more geometrical configurations and, chosen a material model, obtains the optimal values of the material parameters that provide the numerical configurations closest to the physiological images. Given the multiplicity of available material models, the solution is not unique. Results: Three exemplary material models are used in this study to demonstrate that the obtained, non-unique, stress-free configuration is indeed strongly dependent on both material model and on material parameters. Conclusion: The likeliness of recovering the actual stress-free configuration of the human cornea can be improved by using and comparing two or more imaged configurations of the same cornea.

scholarly journals Effect of Aneurysm and Patient Characteristics on Intracranial Aneurysm Wall Thickness

2021 ◽  
Vol 8 ◽  
Author(s):  
Jason M. Acosta ◽  
Anne F. Cayron ◽  
Nicolas Dupuy ◽  
Graziano Pelli ◽  
Bernard Foglia ◽  
...  
Keyword(s):  
Intracranial Aneurysm ◽  
Wall Thickness ◽  
Positive Family History ◽  
Patient Characteristics ◽  
Western World ◽  
University Hospitals ◽  
Thickness Uniformity ◽  
Neck Size ◽  
Aneurysm Wall

Background: The circle of Willis is a network of arteries allowing blood supply to the brain. Bulging of these arteries leads to formation of intracranial aneurysm (IA). Subarachnoid hemorrhage (SAH) due to IA rupture is among the leading causes of disability in the western world. The formation and rupture of IAs is a complex pathological process not completely understood. In the present study, we have precisely measured aneurysmal wall thickness and its uniformity on histological sections and investigated for associations between IA wall thickness/uniformity and commonly admitted risk factors for IA rupture.Methods: Fifty-five aneurysm domes were obtained at the Geneva University Hospitals during microsurgery after clipping of the IA neck. Samples were embedded in paraffin, sectioned and stained with hematoxylin-eosin to measure IA wall thickness. The mean, minimum, and maximum wall thickness as well as thickness uniformity was measured for each IA. Clinical data related to IA characteristics (ruptured or unruptured, vascular location, maximum dome diameter, neck size, bottleneck factor, aspect and morphology), and patient characteristics [age, smoking, hypertension, sex, ethnicity, previous SAH, positive family history for IA/SAH, presence of multiple IAs and diagnosis of polycystic kidney disease (PKD)] were collected.Results: We found positive correlations between maximum dome diameter or neck size and IA wall thickness and thickness uniformity. PKD patients had thinner IA walls. No associations were found between smoking, hypertension, sex, IA multiplicity, rupture status or vascular location, and IA wall thickness. No correlation was found between patient age and IA wall thickness. The group of IAs with non-uniform wall thickness contained more ruptured IAs, women and patients harboring multiple IAs. Finally, PHASES and ELAPSS scores were positively correlated with higher IA wall heterogeneity.Conclusion: Among our patient and aneurysm characteristics of interest, maximum dome diameter, neck size and PKD were the three factors having the most significant impact on IA wall thickness and thickness uniformity. Moreover, wall thickness heterogeneity was more observed in ruptured IAs, in women and in patients with multiple IAs. Advanced medical imaging allowing in vivo measurement of IA wall thickness would certainly improve personalized management of the disease and patient care.

Sign in / Sign up

Export Citation Format

Share Document