Direct Numerical Simulation of Single and Multiple Square Jets in Cross-Flow

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
Y. Yao ◽  
M. Maidi

Direct numerical simulations (DNSs) have been carried out for single and multiple square jets issuing normally into a cross-flow, with the primary aim of studying the flow structures and interaction mechanisms associated with the jet in cross-flow (JICF) problems. The single JICF configuration follows a similar study previously done by Sau et al. (2004, Phys. Rev. E, 69, p. 066302) and the multiple JICF configurations are arranged side-by-side in the spanwise direction with a jet-to-jet adjacent edge distance (H) for the twin-jet case and an additional third jet downstream along the centerline with a jet-to-jet adjacent edge distance (L) for the triple-jet case. Simulations are performed for two twin-jet cases with H=1D,2D, respectively, and for one triple-jet case with H=1D, L=2D, where D is the jet exit width. Flow conditions similar to Sau et al. are considered, i.e., the jet to the cross-flow velocity ratio R=2.5 and the Reynolds number 225, based on the freestream velocity and the jet exit width. For the single jet in cross-flow, the vortical structures from our DNS are in good qualitative agreement with the findings of Sau et al. For the side-by-side twin-jet configuration, results have shown that the merging process of the two initially separated counter-rotating vortex pairs (CRVPs) from each jet hole exit is strongly dependent on the jet-to-jet adjacent edge distance H with earlier merging observed for the case H=1D. Downstream, the flow is dominated by a larger CRVP structure, accompanied by a smaller inner vortex pair. The inner vortex pair is found not to survive in the far-field as it rapidly dissipates before exiting the computational domain. These observations are in good agreement with the experimental findings in the literature. Simulations of the triple-jet in cross-flow case have shown some complicated jet-jet and jet-cross-flow interactions with three vortex pairs observed downstream, significantly different from that seen in the twin-jet cases. The evidence of these flow structures and interaction characteristics could provide a valuable reference database for future in-depth flow physics studies of laboratory experimental and numerical investigations.

Author(s):  
Aravind Kishore ◽  
Urmila Ghia ◽  
K. N. Ghia

Numerical simulations have been carried out for a dual-jet exhaust system issuing perpendicularly into a cross flow. The jets are of equal diameter, and the distance between the jets is four times the jet diameter, with effective velocity ratio of 5 for each jet. Visual evidence of the complex flow field developed is presented. The presence of a jet inside the region of influence of another jet is seen to produce coherent flow structures different from the structures seen in the single jet in cross flow configuration. It is observed that neither the jet center planes nor the plane mid-way between the jets act as symmetry planes. Hence, modeling multiple jets with the jet centre plane as a symmetry boundary may not be consistent with the physics involved. Results show that the dual-jet system does not penetrate into the cross flow as much as a single jet does. This behavior will significantly affect performance of multiple jet systems used for improved mixing.


Author(s):  
Mostafa Esmaeili ◽  
Asghar Afshari ◽  
Farhad A. Jaberi

An Eulerian–Lagrangian mathematical/computational methodology is employed for large-eddy simulation (LES) and detailed study of turbulent mixing in jet in cross-flow (JICF) configuration. Accurate prediction of mixing in JICF is crucially important to the development of advanced combustion systems. A high-order multiblock finite difference (FD) computational algorithm is used to solve the Eulerian velocity and pressure equations in a generalized coordinate system. The composition field, describing the mixing, is obtained from the filtered mass density function (FMDF) and its stochastic Lagrangian Monte-Carlo (MC) solver. Our simulations are shown to accurately predict the important flow features present in JICF such as the counter-rotating vortex pair (CVP), horseshoe, shear layer, and wake vortices. The consistency of the FD and MC parts of the hybrid LES/FMDF model is established for the simulated JICF in various conditions, indicating the numerical accuracy of the model. The effects of parameters influencing the jet penetration, entrainment, and turbulent mixing such as the jet velocity profile, and jet pulsation are investigated. The results show that the jet exit velocity profile significantly changes the trajectory and mixing of injected fluid. The jet pulsation is also shown to enhance the mixing depending on the flow Strouhal number. The LES/FMDF results are shown to be in good agreement with the available experimental data, confirming the reliability of LES/FMDF method for numerical simulation of turbulent mixing in complex flow configurations.


Author(s):  
Kalyana C. Gottiparthi ◽  
Ramanan Sankaran ◽  
Anthony M. Ruiz ◽  
Guilhem Lacaze ◽  
Joseph C. Oefelein

Author(s):  
Aaron F. Shinn ◽  
S. Pratap Vanka

Large Eddy Simulations were performed to study the effect of a micro-ramp on an inclined turbulent jet interacting with a cross-flow in a film-cooling configuration. The micro-ramp vortex generator is placed downstream of the film-cooling jet. Changes in vortex structure and film-cooling effectiveness are evaluated and the genesis of the counter-rotating vortex pair in the jet is discussed. Results are reported with the jet modeled using a plenum/pipe configuration. This configuration was designed based on previous wind tunnel experiments at NASA Glenn Research Center, and the present results are meant to supplement those experiments. It is found that the micro-ramp improves film-cooling effectiveness by generating near-wall counter-rotating vortices which help entrain coolant from the jet and transport it to the surface. The pair of vortices generated by the micro-ramp are of opposite sense to the vortex pair embedded in the jet.


Sign in / Sign up

Export Citation Format

Share Document