Aerodynamic and Endwall Film-Cooling Investigations of a Gas Turbine Nozzle Guide Vane Applying Temperature-Sensitive Paint

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
Martin Kunze ◽  
Konrad Vogeler ◽  
Glenn Brown ◽  
Chander Prakash ◽  
Kenneth Landis
Keyword(s):  
Heat Conduction ◽  
Gas Turbine ◽  
Film Cooling ◽  
Guide Vane ◽  
Temperature Sensitive ◽  
Test Plate ◽  
Nozzle Guide Vane ◽  
Temperature Sensitive Paint ◽  
Nozzle Guide ◽  
Endwall Film Cooling

Endwall film-cooling investigations are conducted with a single row of fan-shaped holes in a low-speed, six-bladed linear cascade. The incidence of the inlet flow was changed between −5 deg and 40 deg to achieve higher loading conditions, which results in an intensification of the secondary flow and enhanced interaction with the injected coolant. The investigated profile is based on a near-hub section of the nozzle guide vane of a highly loaded gas turbine. The aerodynamic performance was investigated using pneumatic probes. The film-cooling effectiveness distribution is determined using the temperature-sensitive paint technique. Carbon dioxide was used as coolant to provide elevated density ratios of about 1.4. Although low thermal conductivity material is used for the endwall test plate, the measured temperature fields show influences of 3D-heat conduction inside the test plate. To measure film effectiveness and the heat transfer separately, an adiabatic test surface is needed. Therefore, the effects of heat conduction are modeled using the finite-element-method. With the resulting convective heat flux pattern derived from the computations, the endwall film-cooling measurements are corrected. Furthermore, this approach is applied to evaluate the heat loss inside the holes and the film discharge temperature at the hole exit.

Aerodynamic and End-Wall Film Cooling Investigations of a Gas Turbine Nozzle Guide Vane Applying Temperature-Sensitive Paint

2009 ◽  
Author(s):  
Martin Kunze ◽  
Konrad Vogeler ◽  
Glenn Brown ◽  
Chander Prakash ◽  
Kenneth Landis
Keyword(s):  
Heat Conduction ◽  
Gas Turbine ◽  
Film Cooling ◽  
Guide Vane ◽  
Temperature Sensitive ◽  
Test Plate ◽  
Nozzle Guide Vane ◽  
Temperature Sensitive Paint ◽  
Nozzle Guide ◽  
Endwall Film Cooling

This paper presents endwall film cooling investigations with a single row of fanshaped holes in a low-speed, six-bladed linear cascade. The variation of the cascade loading was achieved by changing the incidence. The investigated profile is based on a nozzle guide vane of a highly loaded gas turbine. The aerodynamic performance was investigated using pneumatic probes. The film-cooling effectiveness distribution is determined using the temperature-sensitive paint technique (TSP). Carbon dioxide was used as coolant to provide elevated density ratios of about 1.4. Although low thermal conductivity material is used for the endwall test plate, the measured temperature fields show influences of 3D heat conduction inside the test plate. To measure film effectiveness and the heat transfer separately, an adiabatic test surface is needed. Therefore the effects of heat conduction are modeled using the FE-method. With the resulting convective heat flux pattern derived from the computations, the endwall film cooling measurements are corrected. Furthermore this approach is applied to evaluate the heat loss inside the holes and the film discharge temperature at the hole exit.

A Method for Correlating the Influence of External Crossflow on the Discharge Coefficients of Film Cooling Holes

2000 ◽  
Vol 123 (2) ◽  
pp. 258-265 ◽  
Author(s):  
D. A. Rowbury ◽  
M. L. G. Oldfield ◽  
G. D. Lock
Keyword(s):  
Gas Turbine ◽  
Film Cooling ◽  
Discharge Coefficient ◽  
Guide Vane ◽  
Discharge Coefficients ◽  
Nozzle Guide Vane ◽  
Aero Engine ◽  
Nozzle Guide ◽  
Film Cooling Holes ◽  
Asme Paper

An empirical means of predicting the discharge coefficients of film cooling holes in an operating engine has been developed. The method quantifies the influence of the major dimensionless parameters, namely hole geometry, pressure ratio across the hole, coolant Reynolds number, and the freestream Mach number. The method utilizes discharge coefficient data measured on both a first-stage high-pressure nozzle guide vane from a modern aero-engine and a scale (1.4 times) replica of the vane. The vane has over 300 film cooling holes, arranged in 14 rows. Data was collected for both vanes in the absence of external flow. These noncrossflow experiments were conducted in a pressurized vessel in order to cover the wide range of pressure ratios and coolant Reynolds numbers found in the engine. Regrettably, the proprietary nature of the data collected on the engine vane prevents its publication, although its input to the derived correlation is discussed. Experiments were also conducted using the replica vanes in an annular blowdown cascade which models the external flow patterns found in the engine. The coolant system used a heavy foreign gas (SF6 /Ar mixture) at ambient temperatures which allowed the coolant-to-mainstream density ratio and blowing parameters to be matched to engine values. These experiments matched the mainstream Reynolds and Mach numbers and the coolant Mach number to engine values, but the coolant Reynolds number was not engine representative (Rowbury, D. A., Oldfield, M. L. G., and Lock, G. D., 1997, “Engine-Representative Discharge Coefficients Measured in an Annular Nozzle Guide Vane Cascade,” ASME Paper No. 97-GT-99, International Gas Turbine and Aero-Engine Congress & Exhibition, Orlando, Florida, June 1997; Rowbury, D. A., Oldfield, M. L. G., Lock, G. D., and Dancer, S. N., 1998, “Scaling of Film Cooling Discharge Coefficient Measurements to Engine Conditions,” ASME Paper No. 98-GT-79, International Gas Turbine and Aero-Engine Congress & Exhibition, Stockholm, Sweden, June 1998). A correlation for discharge coefficients in the absence of external crossflow has been derived from this data and other published data. An additive loss coefficient method is subsequently applied to the cascade data in order to assess the effect of the external crossflow. The correlation is used successfully to reconstruct the experimental data. It is further validated by successfully predicting data published by other researchers. The work presented is of considerable value to gas turbine design engineers as it provides an improved means of predicting the discharge coefficients of engine film cooling holes.

Aero-Thermal Aspects of Film Cooled Nozzle Guide Vane Endwalls: Part 2 — Thermal Measurements

2020 ◽  
Author(s):  
Mahmood H. Alqefl ◽  
Kedar P. Nawathe ◽  
Pingting Chen ◽  
Rui Zhu ◽  
Yong W. Kim ◽  
...  
Keyword(s):  
Film Cooling ◽  
Guide Vane ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Complex Flow ◽  
Cooling Flows ◽  
Thermal Measurements ◽  
Nozzle Guide Vane ◽  
Nozzle Guide ◽  
Endwall Film Cooling

Abstract Flow over gas turbine endwalls is complex and highly three-dimensional. As boundaries for modern engine designs are pushed, this already-complex flow is affected by aggressive application of film cooling flows that actively interact. This two-part study describes, experimentally, the aero-thermal interaction of cooling flows near the endwall of a first stage nozzle guide vane passage. The approach flow conditions represent flow exiting a low-NOx combustor. The test section includes geometric and cooling details of a combustor-turbine interface in addition to endwall film cooling flows injected upstream of the passage. The first part of this study describes in detail, the passage aerodynamics as affected by injection of cooling flows. It reveals a system of secondary flows, including the newly-discovered Impingement Vortex, which redefines our understanding of the aerodynamics of flow in a modern, film-cooled, first-stage vane row. The second part investigates, through thermal measurements, the distribution, mixing and disruption of cooling flows over the endwall. Measurements are made with and without active endwall film cooling. Descriptions are made through adiabatic surface effectiveness measurements and correlations with in-passage velocity (presented in part one) and thermal fields. Results show that the newly-discovered impingement vortex has a positive effect on coolant distribution through passage vortex suppression and by carrying the coolant to hard-to-cool regions in the passage, including the pressure surface near the endwall.

Effects of Endwall Film Coolant Flowrate on Secondary Flows and Coolant Mixing in a First Stage Nozzle Guide Vane

2021 ◽  
Vol 143 (3) ◽  
Author(s):  
Mahmood H. Alqefl ◽  
Kedar P. Nawathe ◽  
Pingting Chen ◽  
Rui Zhu ◽  
Yong W. Kim ◽  
...  
Keyword(s):  
Test Section ◽  
Film Cooling ◽  
Gas Turbines ◽  
Thermal Loading ◽  
Guide Vane ◽  
Secondary Flows ◽  
Cooling Flows ◽  
Nozzle Guide Vane ◽  
Nozzle Guide ◽  
Endwall Film Cooling

Abstract Modern gas turbines are subjected to very high thermal loading. This leads to a need for aggressive cooling to protect components from damage. Endwalls are particularly challenging to cool due to a complex system of secondary flows near them that wash and disrupt the protective coolant films. This highly three-dimensional flow not only affects but is also affected by the momentum of film cooling flows, whether injected just upstream of the passage to intentionally cool the endwall or as combustor cooling flows injected further upstream in the engine. This complex interaction between the different cooling flows and passage aerodynamics has been recently studied in a first stage nozzle guide vane. The present paper presents a detailed study on the sensitivity of aero-thermal interactions to endwall film cooling mass flow to mainstream flow ratio. The test section represents a first stage nozzle guide vane with a contoured endwall and endwall film cooling injected just upstream of it. The test section also includes an engine-representative combustor–turbine interface geometry with combustor cooling flows injected at a constant rate. The approach flow conditions represent flow exiting a low-NOx combustor. Adiabatic surface thermal measurements and in-passage velocity and thermal field measurements are presented and discussed. The results show the dynamics of passage vortex suppression and the increase of impingement vortex strength as MFR changes. The effects of these changes of secondary flows on coolant distribution are presented.

scholarly journals The Effects of Combustor Cooling Features on Nozzle Guide Vane Film Cooling Experiments

2018 ◽  
Author(s):  
Nicholas E. Holgate ◽  
Peter T. Ireland ◽  
Eduardo Romero
Keyword(s):  
Film Cooling ◽  
Guide Vane ◽  
Stagnation Region ◽  
Airfoil Surface ◽  
Cooling Performance ◽  
Nozzle Guide Vane ◽  
Effectiveness Measurement ◽  
Extraneous Radiation ◽  
Nozzle Guide ◽  
Endwall Film Cooling

Recent advances in experimental methods have allowed researchers to study nozzle guide vane film cooling in the presence of combustor dilution ports and endwall films. The dilution injection creates nonuniformities in temperature, velocity, and turbulence, and an understanding of the vane film cooling performance is complicated by competing influences. In this study, dilution port temperature profiles have been measured in the absence of vane film cooling and compared to film effectiveness measurements in the presence of both films and dilution, illustrating the effects of the dilution port turbulence on film cooling performance. It is found that dilution port injection can create significant effectiveness benefits at the difficult-to-cool vane stagnation region, due to the more turbulent hot mainstream enhancing the mixing of film coolant jets that have left the airfoil surface. Also explored are the implications of endwall film cooling for infrared vane surface temperature measurements. The reduced endwall temperatures reduce the thermal emissions from this surface, so reducing the amount of extraneous radiation reflected from the vane surface where measurements are being made. The results of a detailed calibration show that the maximum local film effectiveness measurement error could be up to 0.05 if this effect were to go unaccounted for.

scholarly journals An Enhanced Flow-Thermo-Structural Modeling and Validation for the Integrated Analysis of a Film Cooling Nozzle Guide Vane

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2775 ◽  
Author(s):  
Peng Guan ◽  
Yan-Ting Ai ◽  
Cheng-Wei Fei
Keyword(s):  
Thermal Stress ◽  
Film Cooling ◽  
Guide Vane ◽  
Integrated Design ◽  
Integrated Analysis ◽  
Inlet Temperature ◽  
Temperature Sensitive ◽  
Computational Accuracy ◽  
Nozzle Guide Vane ◽  
Nozzle Guide

The target of this paper is to develop an enhanced flow-thermo-structural (FTS) model with high computational accuracy, to perform the integrated analysis of film cooling nozzle guide vane (NGV). An efficient turbulence model and weak spring approach are utilized in the enhanced FTS model. In respect of the power balance principle of aeroengine rotor shaft and temperature test of a typical combustor, the mean temperature inlet and five normalization temperature curves were confirmed, respectively. The temperature-sensitive paint (TSP) technology was used to verify the numerical simulation. From this study, we find that the predicted temperature caters for the TSP test well, between which the maximum error is less than 6%, and the maximum thermal stress is 758 MPa around the hole edges and the location of stress concentration keeps the consistency with that of the cracks. The maximum thermal stress increases by 10% with the increasing inlet temperature and reduces by about 16% with the shifting of flame peak from the outer to inner hub. The prediction provides general information on the initiation of cracks on a vane segment. The developed enhanced FTS model is validated to be workable and precise in the integrated analysis of film cooling NGV. The efforts of this study provide an integrated analysis approach of film cooling NGV and are promising to provide guidance for the integrated design of film cooling components besides NGV.

AERO-THERMAL ASPECTS OF FILM COOLED NOZZLE GUIDE VANE ENDWALLS - PART 2: THERMAL MEASUREMENTS

2021 ◽  
pp. 1-39
Author(s):  
Mahmood H. Alqefl ◽  
Kedar P. Nawathe ◽  
Pingting Chen ◽  
Rui Zhu ◽  
Yong Kim ◽  
...  
Keyword(s):  
Film Cooling ◽  
Guide Vane ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Complex Flow ◽  
Cooling Flows ◽  
Thermal Measurements ◽  
Nozzle Guide Vane ◽  
Nozzle Guide ◽  
Endwall Film Cooling

Abstract Flow over gas turbine endwalls is complex and highly three-dimensional. As boundaries for modern engine designs are pushed, this already-complex flow is affected by aggressive application of film cooling flows that actively interact. This two-part study describes, experimentally, the aero-thermal interaction of cooling flows near the endwall of a first stage nozzle guide vane passage. The approach flow conditions represent flow exiting a low-NOx combustor. The test section includes geometric and cooling details of a combustor-turbine interface in addition to endwall film cooling flows injected upstream of the passage. The first part of this study describes in detail, the passage aerodynamics as affected by injection of cooling flows. It reveals a system of secondary flows, including the newly-discovered Impingement Vortex, which redefines our understanding of the aerodynamics of flow in a modern, film-cooled, first-stage vane row. The second part investigates, through thermal measurements, the distribution, mixing and disruption of cooling flows over the endwall. Measurements are made with and without active endwall film cooling. Descriptions are made through adiabatic surface effectiveness measurements and correlations with in-passage velocity (presented in part one) and thermal fields. Results show that the newly-discovered impingement vortex has a positive effect on coolant distribution through passage vortex suppression and by carrying the coolant to hard-to-cool regions in the passage, including the pressure surface near the endwall.

Aero-Thermal Aspects of Film Cooled Nozzle Guide Vane Endwalls: Part 1 — Aerodynamics

2020 ◽  
Author(s):  
Mahmood H. Alqefl ◽  
Kedar P. Nawathe ◽  
Pingting Chen ◽  
Rui Zhu ◽  
Yong W. Kim ◽  
...  
Keyword(s):  
Film Cooling ◽  
Guide Vane ◽  
Three Dimensional ◽  
Leading Edge ◽  
Secondary Flows ◽  
Protective Film ◽  
Cooling Flows ◽  
Nozzle Guide Vane ◽  
Nozzle Guide ◽  
Endwall Film Cooling

Abstract The first stage turbine of a modern gas turbine is subjected to high thermal loads which lead to a need for aggressive cooling schemes to protect its components from melting. Endwalls are particularly challenging to cool due to the complex system of secondary flows near them that wash the protective film coolants into the mainstream. This paper shows that without including combustor cooling, the complex secondary flow physics are not representative of modern engines. Aggressive injection of all cooling flows upstream of the passage is expected to interact and change passage aerodynamics and, subsequently, mixing and transport of coolants. This study describes, experimentally, the aero-thermal interaction of cooling flows near the endwall of a first stage nozzle guide vane passage. The test section involves an engine-representative combustor-turbine interface geometry, combustor coolant flow and endwall film cooling flow injected upstream of a linear cascade. The approach flow conditions represent flow exiting a cooled, low-NOx combustor. This first part of this two-part study aims to understand the complex aerodynamics near the endwall through detailed measurements of passage three-dimensional velocity fields with and without endwall film cooling. The aerodynamic measurements reveal a dominant vortex in the passage, named here as the Impingement Vortex, that opposes the passage vortex formed at the airfoil leading edge plane. This Impingement Vortex completely changes our description of flow over a modern film cooled endwall.

Aero-thermal Aspects of Film Cooled Nozzle Guide Vane Endwall - Part 1: Aerodynamics

2021 ◽  
pp. 1-54
Author(s):  
Mahmood H. Alqefl ◽  
Kedar P. Nawathe ◽  
Pingting Chen ◽  
Rui Zhu ◽  
Yong W. Kim ◽  
...  
Keyword(s):  
Film Cooling ◽  
Guide Vane ◽  
Three Dimensional ◽  
Leading Edge ◽  
Secondary Flows ◽  
Protective Film ◽  
Cooling Flows ◽  
Nozzle Guide Vane ◽  
Nozzle Guide ◽  
Endwall Film Cooling

Abstract The first stage turbine of a modern gas turbine is subjected to high thermal loads which lead to a need for aggressive cooling schemes to protect its components from melting. Endwalls are particularly challenging to cool due to the complex system of secondary flows near them that wash the protective film coolants into the mainstream. This paper shows that without including combustor cooling, the complex secondary flow physics are not representative of modern engines. Aggressive injection of all cooling flows upstream of the passage is expected to interact and change passage aerodynamics and, subsequently, mixing and transport of coolants. This study describes, experimentally, the aero-thermal interaction of cooling flows near the endwall of a first stage nozzle guide vane passage. The test section involves an engine-representative combustor-turbine interface geometry, combustor coolant flow and endwall film cooling flow injected upstream of a linear cascade. The approach flow conditions represent flow exiting a cooled, low-NOx combustor. This first part of this two-part study aims to understand the complex aerodynamics near the endwall through detailed measurements of passage three-dimensional velocity fields with and without endwall film cooling. The aerodynamic measurements reveal a dominant vortex in the passage, named here as the Impingement Vortex, that opposes the passage vortex formed at the airfoil leading edge plane. This Impingement Vortex completely changes our description of flow over a modern film cooled endwall.

Sign in / Sign up

Export Citation Format

Share Document