The Effect of Unequal Admission on the Performance and Loss Generation in a Double-Entry Turbocharger Turbine

2011 ◽  
Vol 134 (2) ◽  
Author(s):  
Colin D. Copeland ◽  
Peter J. Newton ◽  
Ricardo Martinez-Botas ◽  
Martin Seiler
Keyword(s):  
Cfd Model ◽  
Significant Drop ◽  
Turbine Wheel ◽  
Aerodynamic Loss ◽  
Reduced Frequency ◽  
Wide Range ◽  
Flow Features ◽  
Computational Fluid Dynamics Cfd ◽  
Double Entry ◽  
High Degree

The current work investigates a circumferentially divided turbine volute designed such that each gas inlet feeds a separate section of the turbine wheel. Although there is a small connecting interspace formed between the nozzle and the mixed-flow rotor inlet, this design does well to preserve the exhaust gas energy in a pulsed-charged application by largely isolating the two streams entering the turbine. However, this type of volute design produces some interesting flow features as a result of unequal flows driving the turbine wheel. To investigate the influence of unequal flows, experimental data from the turbocharger facility at Imperial College have been gathered over a wide range of steady-state, unequal admission conditions. These test results show a significant drop in turbine performance with increasing pressure difference between inlets. In addition, the swallowing capacities of each gas inlet are interdependent, thus indicating some flow interaction between entries. To understand the flow physics driving the observed performance, a full 3D computational fluid dynamics (CFD) model of the turbine was created. Results show a highly disturbed flow field as a consequence of the nonuniform admission. From these results, it is possible to identify the regions of aerodynamic loss responsible for the measured performance decrease. Given the unequal flows present in a double-entry design, each rotor passage sees an abrupt change in flow conditions as it rotates spanning the two feeding sectors. This operation introduces a high degree of unsteady flow into the rotor passage even when it operates in steady conditions. The amplitude and frequency of this unsteadiness will depend both on the level of unequal admission and the speed of rotor rotation. The reduced frequency associated with this disturbance supports the evidence that the flow in the rotor passage is unsteady. Furthermore, the CFD model indicates that the blade passage flow is unable to fully develop in the time available to travel between the two different sectors (entries).

The Effect of Unequal Admission on the Performance and Loss Generation in a Double-Entry Turbocharger Turbine

2010 ◽  
Author(s):  
Colin D. Copeland ◽  
Peter Newton ◽  
Ricardo Martinez-Botas ◽  
Martin Seiler
Keyword(s):  
Test Results ◽  
Cfd Model ◽  
Significant Drop ◽  
Turbine Wheel ◽  
Aerodynamic Loss ◽  
Reduced Frequency ◽  
Wide Range ◽  
Flow Features ◽  
Double Entry ◽  
High Degree

The current work investigates a circumferentially-divided turbine volute designed such that each gas inlet feeds a separate section of the turbine wheel. Although there is a small connecting interspace formed between the nozzle and the mixed flow rotor inlet, this design does well to preserve the exhaust gas energy in a pulsed-charged application by largely isolating the two streams entering the turbine. However, this type of volute design produces some interesting flow features as a result of unequal flows driving the turbine wheel. To investigate the influence of unequal flows, experimental data from the turbocharger facility at Imperial College has been gathered over a wide range of steady-state, unequal admission conditions. These test results show a significant drop in turbine performance with increasing pressure difference between inlets. In addition, the swallowing capacities of each gas inlet are interdependent, thus indicating some flow interaction between entries. To understand the flow physics driving the observed performance, a full 3-D CFD model of the turbine was created. Results show a highly disturbed flow field as a consequence of the non uniform admission. From these results, it is possible to identify the regions of aerodynamic loss responsible for the measured performance decrease. Given the unequal flows present in a double-entry design, each rotor passage sees an abrupt change in flow conditions as it rotates spanning the two feeding sectors. This operation introduces a high degree of unsteady flow into the rotor passage even when it operates in steady conditions. The amplitude and frequency of this unsteadiness will depend both on the level of unequal admission and the speed of rotor rotation. The reduced frequency associated with this disturbance supports the evidence that the flow in the rotor passage is unsteady. Furthermore, the CFD model indicates that the blade passage flow is unable to fully develop in the time available to travel between the two different sectors (entries).

A Geometry Generation Framework for Contoured Endwalls

2019 ◽  
Author(s):  
L. E. Wood ◽  
R. R. Jones ◽  
O. J. Pountney ◽  
J. A. Scobie ◽  
D. A. S. Rees ◽  
...  
Keyword(s):  
Secondary Flow ◽  
Three Dimensional ◽  
Aerodynamic Loss ◽  
Construction Methods ◽  
Novel Approach ◽  
Wide Range ◽  
Blade Row ◽  
Flow Features ◽  
Flow Effects ◽  
Geometric Variation

Abstract The mainstream, or primary, flow in a gas turbine annulus is characteristically two-dimensional over the mid-span region of the blading, where the radial flow is almost negligible. Contrastingly, the flow in the endwall and tip regions of the blading is highly three-dimensional, characterised by boundary layer effects, secondary flow features and interaction with cooling flows. Engine designers employ geometric contouring of the endwall region in order to reduce secondary flow effects and subsequently minimise their contribution to aerodynamic loss. Such is the geometric variation of vane and blade profiles — which has become a proprietary art form — the specification of an effective endwall geometry is equally unique to each blade-row. Endwall design methods, which are often directly coupled to aerodynamic optimisers, are widely developed to assist with the generation of contoured surfaces. Most of these construction methods are limited to the blade-row under investigation, while few demonstrate the controllability required to offer a universal platform for endwall design. This paper presents a Geometry Generation Framework (GGF) for the generation of contoured endwalls. The framework employs an adaptable meshing strategy, capable of being applied to any vane or blade, and a versatile function-based approach to defining the endwall shape. The flexibility of this novel approach is demonstrated by recreating a selection of endwalls from the literature, which were selected for their wide-range of contouring approaches.

Three-Dimensional CFD Analysis of a Spring-Loaded Pressure Safety Valve From Opening to Re-Closure

2010 ◽  
Author(s):  
Xue Guan Song ◽  
Lei Cui ◽  
Young Chul Park
Keyword(s):  
Safety Valve ◽  
Three Dimensional ◽  
Cfd Model ◽  
Flow Features ◽  
Valve Opening ◽  
Computational Fluid Dynamics Cfd ◽  
Multiple Domains ◽  
Future Work ◽  
Mesh Technique ◽  
Detailed Picture

We describe the dynamic analysis of a spring-loaded pressure safety valve (PSV) using a moving mesh technique and transient analysis in computational fluid dynamics (CFD). Multiple domains containing pure structural meshes are generated to ensure that the correlative mesh could change properly without negative volumes. With a geometrically accurate CFD model including the PSV and vessel rather than only the PSV, the entire process from valve opening to valve re-closure is presented. A detailed picture of the compressible fluid flowing through the PSV is obtained, including flow features in the very small seat region. In addition, the forces on the disc and its motion are monitored. Results from the model were very useful in investigating the dynamic and fluid characteristics of the PSV. Our practical CFD model has the potential to reduce the costs and risks associated with the development of new pressure safety valve designs. Future work will focus on improving the spring stiffness and seat region to eliminate or reduce vibration during the re-closure process.

scholarly journals An experimental and theoretical investigation of flow in a gross pollutant trap

2009 ◽  
Vol 59 (6) ◽  
pp. 1117-1127 ◽  
Author(s):  
J. T. Madhani ◽  
N. A. Kelson ◽  
R. J. Brown
Keyword(s):  
Free Surface ◽  
Cross Sections ◽  
Experimental Approach ◽  
Detailed Comparison ◽  
Cfd Modelling ◽  
Wide Range ◽  
Significant Difference ◽  
Flow Features ◽  
Computational Fluid Dynamics Cfd ◽  
Near Wall

Flow through a gross pollutant trap (GPT) with fully blocked screens is investigated experimentally and theoretically using computational fluid dynamics (CFD). Due to the wide range of possible flow regimes, an experimental approach is developed which uses a downstream weir arrangement to control the nature of the flow and the variation in free surface height. To determine the overall flow structure, measurements are taken at a fixed depth throughout the trap with an Acoustic Doppler Velocimeter (ADV), including velocity profile data across three cross sections of the GPT suitable for more detailed comparison with simulations. Observations of the near-wall flow features at the free surface are also taken, due to their likely importance for understanding litter capture and retention in the GPT. Complementary CFD modelling (using Fluent 6.3) is performed using a two-dimensional k−ɛ turbulence model along with either standard wall law boundary conditions or enhanced near-wall modelling approaches. Comparison with experiments suggest that neither CFD modelling approach could be considered as clearly superior to the other, despite the significant difference in near-wall mesh refinement and modelling that is involved. The experimental approach taken here is found useful to control the flow regime in the GPT and further experiments are recommended to study a greater range of flow conditions.

A Geometry Generation Framework for Contoured Endwalls

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Liam E. Wood ◽  
Robin R. Jones ◽  
Oliver J. Pountney ◽  
James A. Scobie ◽  
D. Andrew S. Rees ◽  
...  
Keyword(s):  
Secondary Flow ◽  
Three Dimensional ◽  
Aerodynamic Loss ◽  
Construction Methods ◽  
Novel Approach ◽  
Wide Range ◽  
Blade Row ◽  
Flow Features ◽  
Flow Effects ◽  
Geometric Variation

Abstract The mainstream, or primary, flow in a gas turbine annulus is characteristically two-dimensional over the midspan region of the blading, where the radial flow is almost negligible. Contrastingly, the flow in the endwall and tip regions of the blading is highly three-dimensional (3D), characterized by boundary layer effects, secondary flow features, and interaction with cooling flows. Engine designers employ geometric contouring of the endwall region in order to reduce secondary flow effects and subsequently minimize their contribution to aerodynamic loss. Such is the geometric variation of vane and blade profiles—which has become a proprietary art form—the specification of an effective endwall geometry is equally unique to each blade row. Endwall design methods, which are often directly coupled to aerodynamic optimizers, are widely developed to assist with the generation of contoured surfaces. Most of these construction methods are limited to the blade row under investigation, while few demonstrate the controllability required to offer a universal platform for endwall design. This paper presents a geometry generation framework (GGF) for the generation of contoured endwalls. The framework employs an adaptable meshing strategy, capable of being applied to any vane or blade, and a versatile function-based approach to defining the endwall shape. The flexibility of this novel approach is demonstrated by recreating a selection of endwalls from the literature, which were selected for their wide range of contouring approaches.

Profiling and modelling of thermal changes in a large waste stabilisation pond

2005 ◽  
Vol 51 (12) ◽  
pp. 163-172 ◽  
Author(s):  
D.G. Sweeney ◽  
J.B. Nixon ◽  
N.J. Cromar ◽  
H.J. Fallowfield
Keyword(s):  
Wind Shear ◽  
Inlet Temperature ◽  
Outlet Temperature ◽  
Prevailing Wind ◽  
Cfd Model ◽  
Thermal Changes ◽  
Thermal Profiling ◽  
Computational Fluid Dynamics Cfd ◽  
High Degree ◽  
The Impact

A thermal profiling study was undertaken at four depths at each of nine sites, and at the inlets and outlets of a large waste stabilisation pond (WSP). Results were collected simultaneously using a network of 42 thermistors and dataloggers. Profiles at each site were categorised as either “stratified” or “unstratified”, and persistence analysis was used to determine the frequency and persistence of stratification events at each of the nine sites. Stratification was found to persist most strongly at the site furthest upwind in the WSP, with respect to prevailing wind during the study, leading to the conclusion that stratification induced short-circuiting will be greatest in this region of the WSP. A computational fluid dynamics (CFD) model was constructed of the WSP, including an energy balance to predict the bulk stratification gradient in the pond. Environmental conditions and WSP inlet temperature during one day in June 2001 were used as boundary conditions. The pond thermal profiles measured during the profiling study, together with outlet temperature during the day, were used to validate the CFD model results. The model predicted mean pond temperature with a high degree of accuracy (r2=0.92). However it was evident that even modest winds (≥1.5 m/s) partially broke down stratification, leading to poor prediction of the gradient by the CFD model, which did not directly account for the impact of wind shear stress on mixing in the WSP.

Understanding Conformational Entropy in Small Molecules

2020 ◽  
Author(s):  
Lucian Chan ◽  
Garrett Morris ◽  
Geoffrey Hutchison
Keyword(s):  
Small Molecules ◽  
Degrees Of Freedom ◽  
Absolute Error ◽  
Low Energy ◽  
Standard Entropy ◽  
Free Energies ◽  
Conformational Entropy ◽  
Wide Range ◽  
High Degree ◽  
Empirical Corrections

The calculation of the entropy of flexible molecules can be challenging, since the number of possible conformers grows exponentially with molecule size and many low-energy conformers may be thermally accessible. Different methods have been proposed to approximate the contribution of conformational entropy to the molecular standard entropy, including performing thermochemistry calculations with all possible stable conformations, and developing empirical corrections from experimental data. We have performed conformer sampling on over 120,000 small molecules generating some 12 million conformers, to develop models to predict conformational entropy across a wide range of molecules. Using insight into the nature of conformational disorder, our cross-validated physically-motivated statistical model can outperform common machine learning and deep learning methods, with a mean absolute error ≈4.8 J/mol•K, or under 0.4 kcal/mol at 300 K. Beyond predicting molecular entropies and free energies, the model implies a high degree of correlation between torsions in most molecules, often as- sumed to be independent. While individual dihedral rotations may have low energetic barriers, the shape and chemical functionality of most molecules necessarily correlate their torsional degrees of freedom, and hence restrict the number of low-energy conformations immensely. Our simple models capture these correlations, and advance our understanding of small molecule conformational entropy.

Cerebellotrigeminal Dermal Dysplasia (Gómez-López-Hernández Syndrome)

2018 ◽  
Vol 16 (05) ◽  
pp. 362-368 ◽  
Author(s):  
Federica Sullo ◽  
Agata Polizzi ◽  
Stefano Catanzaro ◽  
Selene Mantegna ◽  
Francesco Lacarrubba ◽  
...  
Keyword(s):  
De Novo ◽  
Chromosomal Rearrangements ◽  
Number Of Patients ◽  
Wide Range ◽  
Visual Problems ◽  
Neurodevelopmental Abnormalities ◽  
Clinical Triad ◽  
High Degree ◽  
Motor Handicap

Cerebellotrigeminal dermal (CTD) dysplasia is a rare neurocutaneous disorder characterized by a triad of symptoms: bilateral parieto-occipital alopecia, facial anesthesia in the trigeminal area, and rhombencephalosynapsis (RES), confirmed by cranial magnetic resonance imaging. CTD dysplasia is also known as Gómez-López-Hernández syndrome. So far, only 35 cases have been described with varying symptomatology. The etiology remains unknown. Either spontaneous dominant mutations or de novo chromosomal rearrangements have been proposed as possible explanations. In addition to its clinical triad of RES, parietal alopecia, and trigeminal anesthesia, CTD dysplasia is associated with a wide range of phenotypic and neurodevelopmental abnormalities.Treatment is symptomatic and includes physical rehabilitation, special education, dental care, and ocular protection against self-induced corneal trauma that causes ulcers and, later, corneal opacification. The prognosis is correlated to the mental development, motor handicap, corneal–facial anesthesia, and visual problems. Follow-up on a large number of patients with CTD dysplasia has never been reported and experience is limited to few cases to date. High degree of suspicion in a child presenting with characteristic alopecia and RES has a great importance in diagnosis of this syndrome.

Effects of Over Fire Air on the Combustion and NOx Emission Characteristics of a 600 MW Opposed Swirling Fired Boiler

2012 ◽  
Vol 512-515 ◽  
pp. 2135-2142 ◽  
Author(s):  
Yu Peng Wu ◽  
Zhi Yong Wen ◽  
Yue Liang Shen ◽  
Qing Yan Fang ◽  
Cheng Zhang ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Empirical Method ◽  
Nox Emission ◽  
Emission Characteristics ◽  
Cfd Model ◽  
Nitrogen Release ◽  
Computational Fluid Dynamics Cfd ◽  
Low Nox Emission

A computational fluid dynamics (CFD) model of a 600 MW opposed swirling coal-fired utility boiler has been established. The chemical percolation devolatilization (CPD) model, instead of an empirical method, has been adapted to predict the nitrogen release during the devolatilization. The current CFD model has been validated by comparing the simulated results with the experimental data obtained from the boiler for case study. The validated CFD model is then applied to study the effects of ratio of over fire air (OFA) on the combustion and nitrogen oxides (NOx) emission characteristics. It is found that, with increasing the ratio of OFA, the carbon content in fly ash increases linearly, and the NOx emission reduces largely. The OFA ratio of 30% is optimal for both high burnout of pulverized coal and low NOx emission. The present study provides helpful information for understanding and optimizing the combustion of the studied boiler

scholarly journals Controlling Teleportation-Based Locomotion in Virtual Reality with Hand Gestures: A Comparative Evaluation of Two-Handed and One-Handed Techniques

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 715
Author(s):  
Alexander Schäfer ◽  
Gerd Reis ◽  
Didier Stricker
Keyword(s):  
Virtual Reality ◽  
Virtual Worlds ◽  
User Preferences ◽  
Interaction Techniques ◽  
Hand Gestures ◽  
Wide Range ◽  
Effectiveness And Efficiency ◽  
High Degree ◽  
Additional Hardware ◽  
Comprehensive Study

Virtual Reality (VR) technology offers users the possibility to immerse and freely navigate through virtual worlds. An important component for achieving a high degree of immersion in VR is locomotion. Often discussed in the literature, a natural and effective way of controlling locomotion is still a general problem which needs to be solved. Recently, VR headset manufacturers have been integrating more sensors, allowing hand or eye tracking without any additional required equipment. This enables a wide range of application scenarios with natural freehand interaction techniques where no additional hardware is required. This paper focuses on techniques to control teleportation-based locomotion with hand gestures, where users are able to move around in VR using their hands only. With the help of a comprehensive study involving 21 participants, four different techniques are evaluated. The effectiveness and efficiency as well as user preferences of the presented techniques are determined. Two two-handed and two one-handed techniques are evaluated, revealing that it is possible to move comfortable and effectively through virtual worlds with a single hand only.

Sign in / Sign up

Export Citation Format

Share Document