Partially Averaged Navier–Stokes (PANS) Method for Turbulence Simulations: Flow Past a Circular Cylinder

2010 ◽  
Vol 132 (12) ◽  
Author(s):  
Sunil Lakshmipathy ◽  
Sharath S. Girimaji
Keyword(s):  
Circular Cylinder ◽  
Navier Stokes ◽  
Length Scale ◽  
Detached Eddy Simulation ◽  
Mean Flow ◽  
Closure Model ◽  
Variable Resolution ◽  
Eddy Simulation ◽  
Flow Past ◽  
High Reynolds

The objective of this study is to evaluate the capability of the partially averaged Navier–Stokes (PANS) method in a moderately high Reynolds number (ReD 1.4×105) turbulent flow past a circular cylinder. PANS is a bridging closure model purported for use at any level of resolution ranging from Reynolds-averaged Navier–Stokes to direct numerical simulations. The closure model is sensitive to the length-scale cut-off via the ratios of unresolved-to-total kinetic energy (fk) and unresolved-to-total dissipation (fε). Several simulations are performed to study the effect of the cut-off length-scale on computed closure model results. The results from various resolutions are compared against experimental data, large eddy simulation, and detached eddy simulation solutions. The quantities examined include coefficient of drag (Cd), Strouhal number (St), and coefficient of pressure distribution (Cp) along with the mean flow statistics and flow structures. Based on the computed results for flow past circular cylinder presented in this paper and analytical attributes of the closure model, it is reasonable to conclude that the PANS bridging method is a theoretically sound and computationally viable variable resolution approach for practical flow computations.

Detailed Investigation of Detached-Eddy Simulation for the Flow Past a Circular Cylinder at Re=3900

2012 ◽  
Vol 232 ◽  
pp. 471-476 ◽  
Author(s):  
Rui Zhao ◽  
Chao Yan
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Flow Structures ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Flow Past ◽  
Large Eddy ◽  
Mesh Resolution ◽  
Physical Phenomena

The flow past a circular cylinder at a subcritical Reynolds number 3900 was simulated by the method of detached-eddy simulation (DES). The objective of this present work is not to investigate the physical phenomena of the flow but to study modeling as well as numerical aspects which influence the quality of DES solutions in detail. Firstly, four typical spanwise lengths are chosen and the results are systematically compared. The trend of DES results along the span increment is different from previous large-eddy simulation (LES) investigation. A wider spanwise length does not necessary improve the results. Then, the influence of mesh resolution is studied and found that both too coarse and over refined grids will deteriorate the performance of DES. Finally, different orders of numerical schemes are applied in the inviscid fluxes and the viscous terms. The discrepancies among different schemes are found tiny. However, the instantaneous flow structures produced by 5th order WENO with 4th order central differencing scheme are more abundant than the others. That is, for the time-averaged quantities, the second-order accurate schemes are effective enough, whereas the higher-order accurate methods are needed to resolve the transient characteristics of the flow.

A Comparative Study of DES and URANS in a Two-Pass Internal Cooling Duct With Normal Ribs

2005 ◽  
Author(s):  
Aroon K. Viswanathan ◽  
Danesh K. Tafti
Keyword(s):  
Heat Transfer ◽  
Secondary Flows ◽  
Navier Stokes ◽  
Internal Cooling ◽  
Detached Eddy Simulation ◽  
Mean Flow ◽  
Streamline Curvature ◽  
Eddy Simulation ◽  
Flow And Heat Transfer ◽  
Developing Flow

The capabilities of the Detached Eddy Simulation (DES) and the Unsteady Reynolds Averaged Navier-Stokes (URANS) versions of the 1988 κ-ω model in predicting the turbulent flow field and the heat transfer in a two-pass internal cooling duct with normal ribs is presented. The flow is dominated by the separation and reattachment of shear layers; unsteady vorticity induced secondary flows and strong streamline curvature. The techniques are evaluated in predicting the developing flow at the entrance to the duct and downstream of the 180° bend, fully-developed regime in the first pass, and in the 180° bend. Results of mean flow quantities, secondary flows, friction and heat transfer are compared to experiments and Large-Eddy Simulations (LES). DES predicts a slower flow development than LES, while URANS predicts it much earlier than LES computations and experiments. However it is observed that as fully developed conditions are established, the capability of the base model in predicting the flow and heat transfer is enhanced by switching to the DES formulation. DES accurately predicts the flow and heat transfer both in the fully-developed region as well as the 180° bend of the duct. URANS fails to predict the secondary flows in the fully-developed region of the duct and is clearly inferior to DES in the 180° bend.

Detached-Eddy Simulations and Reynolds-Averaged Navier-Stokes Simulations of Delta Wing Vortical Flowfields

2002 ◽  
Vol 124 (4) ◽  
pp. 924-932 ◽  
Author(s):  
Scott Morton ◽  
James Forsythe ◽  
Anthony Mitchell ◽  
David Hajek
Keyword(s):  
Vortex Breakdown ◽  
Delta Wing ◽  
Turbulence Models ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Fighter Aircraft ◽  
Eddy Simulation ◽  
Reynolds Averaged Navier Stokes ◽  
High Reynolds

An understanding of vortical structures and vortex breakdown is essential for the development of highly maneuverable vehicles and high angle of attack flight. This is primarily due to the physical limits these phenomena impose on aircraft and missiles at extreme flight conditions. Demands for more maneuverable air vehicles have pushed the limits of current CFD methods in the high Reynolds number regime. Simulation methods must be able to accurately describe the unsteady, vortical flowfields associated with fighter aircraft at Reynolds numbers more representative of full-scale vehicles. It is the goal of this paper to demonstrate the ability of detached-eddy Simulation (DES), a hybrid Reynolds-averaged Navier-Stokes (RANS)/large-eddy Simulation (LES) method, to accurately predict vortex breakdown at Reynolds numbers above 1×106. Detailed experiments performed at Onera are used to compare simulations utilizing both RANS and DES turbulence models.

Viscous oscillatory flow about a circular cylinder at small to moderate Strouhal number

1995 ◽  
Vol 303 ◽  
pp. 215-232 ◽  
Author(s):  
H. M. Badr ◽  
S. C. R. Dennis ◽  
S. Kocabiyik ◽  
P. Nguyen
Keyword(s):  
Circular Cylinder ◽  
Strouhal Number ◽  
Transient Flow ◽  
Stokes Equations ◽  
Inviscid Flow ◽  
Navier Stokes ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Method Of Solution ◽  
High Reynolds

The transient flow field caused by an infinitely long circular cylinder placed in an unbounded viscous fluid oscillating in a direction normal to the cylinder axis, which is at rest, is considered. The flow is assumed to be started suddenly from rest and to remain symmetrical about the direction of motion. The method of solution is based on an accurate procedure for integrating the unsteady Navier–Stokes equations numerically. The numerical method has been carried out for large values of time for both moderate and high Reynolds numbers. The effects of the Reynolds number and of the Strouhal number on the laminar symmetric wake evolution are studied and compared with previous numerical and experimental results. The time variation of the drag coefficients is also presented and compared with an inviscid flow solution for the same problem. The comparison between viscous and inviscid flow results shows a better agreement for higher values of Reynolds and a Strouhal numbers. The mean flow for large times is calculated and is found to be in good agreement with previous predictions based on boundary-layer theory.

Experimental and numerical analyses of gas–solid-multiphase jet in cross-flow

2012 ◽  
Vol 227 (1) ◽  
pp. 61-79 ◽  
Author(s):  
Yao Fu ◽  
Tong Wang ◽  
Chuangang Gu
Keyword(s):  
Flow Field ◽  
Transient Flow ◽  
Cross Flow ◽  
Jet Flow ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Calculation Methods ◽  
Mean Flow ◽  
Eddy Simulation ◽  
Reynolds Averaged Navier Stokes

In this article, jet influence on a gas–solid-multiphase channel flow was experimentally and numerically studied. The jet flow was found to have a diameter-selective controlling effect on the particles’ distribution. Jet flow formed a gas barrier in the channel for particles. While tiny particles could travel around and large particles could travel through, only particles on the 10 -µm scale were obviously affected. Three different calculation methods, Reynolds averaged Navier–Stokes, unsteady Reynolds averaged Navier–Stokes, and detached eddy simulation, were used to simulate this multiphase flow. By comparing the calculation results to the experimental results, it is found that all the three calculation methods could capture the basic phenomenon in the mean flow field. Nevertheless, there exist great differences in the transient flow field and particle distribution.

Numerical Prediction of Bare and Straked Cylinder VIV

2006 ◽  
Author(s):  
Yiannis Constantinides ◽  
Owen H. Oakley
Keyword(s):  
Turbulence Models ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Numerical Studies ◽  
Vortex Induced Vibrations ◽  
Computational Fluid Dynamics Cfd ◽  
Offshore Industry ◽  
High Reynolds ◽  
Cfd Method

The prediction of deepwater riser Vortex Induced Vibrations (VIV) is one of the most challenging areas in the offshore industry. Numerous experimental and numerical studies have been performed in an effort to improve the understanding and prediction of cylinder VIV behavior. This paper presents the numerical simulation of rigid circular sections, both bare and fitted with strakes, using a second order accurate finite element computational fluid dynamics (CFD) method. Two turbulence models are examined: the Spalart-Allmaras Reynolds Averaged Navier Stokes (RANS) and the Detached Eddy Simulation (DES). Pragmatic high Reynolds number simulations of fixed and moving cylinders are presented and compared with laboratory experiments. Flow visualization provides insights on how strakes mitigate VIV. Comparisons between RANS and DES results are also presented and discussed.

Assessment of improved delayed detached eddy simulation in predicting unsteady flows and sound around a circular cylinder

2021 ◽  
pp. 2150384
Author(s):  
Bo Luo ◽  
Wuli Chu ◽  
Song Yan ◽  
Zhengjing Shen ◽  
Haoguang Zhang
Keyword(s):  
Circular Cylinder ◽  
Unsteady Flows ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Numerical Resolution ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Unsteady Wake ◽  
Large Eddy ◽  
Computational Resources

Unsteady flows in the field of engineering are usually calculated by the Unsteady Reynolds-Averaged Navier–Stokes (URANS) owing to the low requirements for computational efforts. However, the numerical resolution of URANS, especially in predicting the unsteady wake flows and sound, is still questionable. In this work, unsteady flow and sound calculations of a circular cylinder are carried out using Improved Delayed Detached Eddy Simulation (IDDES) and the Ffowcs Williams–Hawkings (FW-H) analogy. The predicted results of this calculation are compared with those from the previous studies in the literature in terms of the mean and RMS of the velocity components as well as the sound pressure. The results show that IDDES retains much of the numerical accuracy of the Large Eddy Simulation (LES) approach in predicting unsteady flows and noise while requiring a reduced computational resources in comparison to LES. It is believed that the IDDES can be applied to calculate the complex unsteady flows and flow generated sound with reasonable accuracy in engineering field, which can be used as a promising method for scale-resolving simulations to avoid the expensive computational requirements of LES.

A Comparative Study of DES and URANS for Flow Prediction in a Two-Pass Internal Cooling Duct

2006 ◽  
Vol 128 (6) ◽  
pp. 1336-1345 ◽  
Author(s):  
Aroon K. Viswanathan ◽  
Danesh K. Tafti
Keyword(s):  
Secondary Flows ◽  
Navier Stokes ◽  
Internal Cooling ◽  
Detached Eddy Simulation ◽  
Mean Flow ◽  
Streamline Curvature ◽  
Eddy Simulation ◽  
Developing Flow ◽  
Large Eddy ◽  
First Pass

The capabilities of the detached eddy simulation (DES) and the unsteady Reynolds averaged Navier-Stokes (URANS) versions of the 1988 k-ω model in predicting the turbulent flow field in a two-pass internal cooling duct with normal ribs is presented. The flow is dominated by the separation and reattachment of shear layers; unsteady vorticity induced secondary flows and strong streamline curvature. The techniques are evaluated in predicting the developing flow at the entrance to the duct and downstream of the 180deg bend, fully developed regime in the first pass, and in the 180deg bend. Results of mean flow quantities, secondary flows, and the average friction factor are compared to experiments and large-eddy simulations (LES). DES predicts a slower flow development than LES, whereas URANS predicts it much earlier than LES computations and experiments. However, it is observed that as fully developed conditions are established, the capability of the base model in predicting the flow is enhanced by the DES formulation. DES accurately predicts the flow both in the fully developed region as well as the 180deg bend of the duct. URANS fails to predict the secondary flows in the fully developed region of the duct and is clearly inferior to DES in the 180deg bend.

Sign in / Sign up

Export Citation Format

Share Document