Hybrid LES Approach for Practical Turbomachinery Flows—Part II: Further Applications

2011 ◽  
Vol 134 (2) ◽  
Author(s):  
Paul Tucker ◽  
Simon Eastwood ◽  
Christian Klostermeier ◽  
Hao Xia ◽  
Prasun Ray ◽  
...  
Keyword(s):  
Navier Stokes ◽  
Jet Flows ◽  
Hybrid Strategy ◽  
Eddy Simulation ◽  
Wall Flows ◽  
Large Eddy ◽  
Blade Section ◽  
Transition Modeling ◽  
Fan Blade ◽  
Les Model

A hybrid large eddy simulation (LES) related technique is used to explore some key turbomachinery relevant flows. Near wall Reynolds-averaged Navier-Stokes (RANS) modeling is used to cover over especially small scales, the LES resolution of which is generally intractable with current computational power. Away from walls, large eddy type simulation is used but with no LES model (numerical LES (NLES)). Linking of the two model zones through a Hamilton–Jacobi equation is explored. The hybrid strategy is used to predict turbine and compressor end wall flows, flow around a fan blade section, jet flows, and a cutback trailing edge. Also, application of NLES to the flow in an idealized high pressure compressor drum cavity is considered. Generally, encouraging results are found. However, challenges remain, especially for flows where transition modeling is important.

Hybrid LES Approach for Practical Turbomachinery Flows: Part 2—Further Applications

2010 ◽  
Author(s):  
Paul Tucker ◽  
Simon Eastwood ◽  
Christian Klostermeier ◽  
Hao Xia ◽  
Prasun Ray ◽  
...  
Keyword(s):  
Jet Flows ◽  
Hybrid Strategy ◽  
Eddy Simulation ◽  
High Pressure Compressor ◽  
Large Eddy ◽  
Blade Section ◽  
Rans Modeling ◽  
Transition Modeling ◽  
Fan Blade ◽  
Les Model

A hybrid Large Eddy Simulation (LES) related technique is used to explore some key turbomachinery relevant flows. Near wall RANS modeling is used to cover over especially small scales, the LES resolution of which is generally intractable with current computational power. Away from walls, large eddy type simulation is used but with no LES model (NLES). Linking of the two model zones through a Hamilton-Jacobi equation is explored. The hybrid strategy is used to predict turbine and compressor endwall flows, flow around a fan blade section, jet flows and a cutback trailing edge. Also, application of NLES to the flow in an idealized high pressure compressor drum cavity is considered. Generally, encouraging results are found. However, challenges remain, especially for flows where transition modeling is important.

Hybrid LES Approach for Practical Turbomachinery Flows—Part I: Hierarchy and Example Simulations

2011 ◽  
Vol 134 (2) ◽  
Author(s):  
Paul Tucker ◽  
Simon Eastwood ◽  
Christian Klostermeier ◽  
Richard Jefferson-Loveday ◽  
James Tyacke ◽  
...  
Keyword(s):  
Convex Surface ◽  
Computational Cost ◽  
Companion Paper ◽  
Navier Stokes ◽  
Computationally Efficient ◽  
Turbulent Structures ◽  
Hybrid Strategy ◽  
Eddy Simulation ◽  
Related Approach ◽  
Les Model

Unlike Reynolds-averaged Navier–Stokes (RANS) models that need calibration for different flow classes, LES (where larger turbulent structures are resolved by the grid and smaller modeled in a fashion reminiscent of RANS) offers the opportunity to resolve geometry dependent turbulence as found in complex internal flows—albeit at substantially higher computational cost. Based on the results for a broad range of studies involving different numerical schemes, large eddy simulation (LES) models and grid topologies, an LES hierarchy and hybrid LES related approach is proposed. With the latter, away from walls, no LES model is used, giving what can be termed numerical LES (NLES). This is relatively computationally efficient and makes use of the dissipation present in practical industrial computational fluid dynamics (CFD) programs. Near walls, RANS modeling is used to cover over numerous small structures, the LES resolution of which is generally intractable with current computational power. The linking of the RANS and NLES zones through a Hamilton–Jacobi equation is advocated. The RANS-NLES hybridization makes further sense for compressible flow solvers, where, as the Mach number tends to zero at walls, excessive dissipation can occur. The hybrid strategy is used to predict flow over a rib roughened surface and a jet impinging on a convex surface. These cases are important for blade cooling and show encouraging results. Further results are presented in a companion paper.

scholarly journals LES and RANS Investigations Into Buoyancy-Affected Convection in a Rotating Cavity With a Central Axial Throughflow

2006 ◽  
Author(s):  
Zixiang Sun ◽  
Klas Lindblad ◽  
John W. Chew ◽  
Colin Young
Keyword(s):  
Heat Transfer ◽  
Tangential Velocity ◽  
Navier Stokes ◽  
Test Cases ◽  
Test Rig ◽  
Rotating Disc ◽  
Eddy Simulation ◽  
Rotating Cavity ◽  
Large Eddy ◽  
Les Model

The buoyancy-affected flow in rotating disc cavities, such as occurs in compressor disc stacks, is known to be complex and difficult to predict. In the present work large eddy simulation (LES) and unsteady Reynolds-averaged Navier-Stokes (RANS) solutions are compared with other workers’ measurements from an engine representative test rig. The Smagorinsky-Lilly model was employed in the LES simulations, and the RNG k-ε turbulence model was used in the RANS modelling. Three test cases were investigated in a range of Grashof number Gr = 1.87 to 7.41×108 and buoyancy number Bo = 1.65 to 11.5. Consistent with experimental observation, strong unsteadiness was clearly observed in the results of both models, however the LES results exhibited a finer flow structure than the RANS solution. The LES model also achieved significantly better agreement with velocity and heat transfer measurements than the RANS model. Also, temperature contours obtained from the LES results have a finer structure than the tangential velocity contours. Based on the results obtained in this work, further application of LES to flows of industrial complexity is recommended.

Wind-Driven Natural Ventilation in an Areaway-Attached Basement with a Single-Sided Opening for Residential Purposes

2011 ◽  
Vol 383-390 ◽  
pp. 5344-5349
Author(s):  
Zhen Bu
Keyword(s):  
Natural Ventilation ◽  
Ventilation Rate ◽  
Navier Stokes ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Effective Ventilation ◽  
The Mean ◽  
Ventilation Rates ◽  
Les Model ◽  
Good Agreement

This paper discusses the sustainability of the areaway-attached basement concept with the attentions focused on wind-driven single-sided natural ventilation. First, numerical simulations were performed on an areaway-attached basement with a single-sided opening. Two CFD approaches: Reynolds averaged Navier-Stokes (RANS) and large-eddy simulation (LES) were used and compared with the previous experimental results of effective ventilation rate. A good agreement between the measurement and LES model was found and RANS model tends to underestimate the ventilation rates. Furthermore, Based on LES with the inflow turbulent fluctuations, the mean airflow patterns within and around the areaway-attached basement was investigated for different wind incidence angles to examine the influences of wind direction on ventilation performances.

On the Investigation of Flow around the Square Cylinder Based on Different LES Models

2012 ◽  
Vol 594-597 ◽  
pp. 2676-2679
Author(s):  
Zhe Liu
Keyword(s):  
Flow Characteristics ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Square Cylinder ◽  
Rans Model ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Reynolds Averaged Navier Stokes ◽  
Les Model

Although the conventional Reynolds-averaged Navier–Stokes (RANS) model has been widely applied in the industrial and engineering field, it is worthwhile to study whether these models are suitable to investigate the flow filed varying with the time. With the development of turbulence models, the unsteady Reynolds-averaged Navier–Stokes (URANS) model, detached eddy simulation (DES) and large eddy simulation (LES) compensate the disadvantage of RANS model. This paper mainly presents the theory of standard LES model, LES dynamic model and wall-adapting local eddy-viscosity (WALE) LES model. And the square cylinder is selected as the research target to study the flow characteristics around it at Reynolds number 13,000. The influence of different LES models on the flow field around the square cylinder is compared.

Large Eddy Simulation of Aerodynamic Forces on a Bridge Pylon

2011 ◽  
Vol 243-249 ◽  
pp. 1578-1582
Author(s):  
Xu Yong Ying ◽  
Fu You Xu ◽  
Zhe Zhang ◽  
Yong Gang Tan
Keyword(s):  
Large Eddy Simulation ◽  
Bluff Body ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Wind Tunnel Test ◽  
Navier Stokes ◽  
Aerodynamic Forces ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Les Model

In this study, aerodynamic forces on a bridge pylon are investigated by three-dimensional computational fluid dynamics using Large eddy simulation (LES) technology. The main objective is to identify the wind load parameters of the pylon and examine the accuracy of LES model applied to the bluff-body flows. The numerical results were compared with the available wind tunnel test results. Also, a comparison between using LES and Reynolds averaged Navier-Stokes equations with the RNG model have been made. It is found that the LES model competes the RNG model in accuracy for predictions of aerodynamic forces on the pylon.

Propulsive jets and their acoustics

2007 ◽  
Vol 365 (1859) ◽  
pp. 2443-2467 ◽  
Author(s):  
Alexander N Secundov ◽  
Stanley F Birch ◽  
Paul G Tucker
Keyword(s):  
Navier Stokes ◽  
Jet Flows ◽  
Complex Flow ◽  
Flow Physics ◽  
Eddy Simulation ◽  
Daunting Task ◽  
Wide Range ◽  
Large Eddy ◽  
Computational Resources ◽  
Hybrid Forms

The complex flow physics challenges and asks questions regarding these challenges a wide range of jet flows found in aerospace engineering. Hence, the daunting task facing Reynolds-averaged Navier–Stokes (RANS) technology, for which the time average of the turbulent flow field is solved, is set out. Despite the clear potential of large eddy simulation (LES)-related methods and hybrid forms involving some RANS modelling, numerous current deficiencies, mostly related to the limitations of computational resources, are identified. It is concluded that currently, these limitations make LES and hybrids most useful for understanding flow physics and refining RANS technology. The use of LES in conjunction with a ray-tracing model to elucidate the physics of acoustic wave transmission in jets and thus improved RANS technology is described. It is argued that, as a stopgap measure, pure RANS simulations can be a valuable part of the design process and can now predict acoustics spectra and directivity diagrams with useful accuracy. Ultimately, hybrid RANS–LES-type methods, and then pure LES, will dominate, but the time-scales for this transition suggests that improvements to RANS technology should not be ignored.

A Novel Fix to Reduce the Log-Layer Mismatch in Wall-Modeled Large-Eddy Simulations of Turbulent Channel Flow

2016 ◽  
Author(s):  
Rey DeLeon ◽  
Inanc Senocak
Keyword(s):  
Pressure Gradient ◽  
Channel Flow ◽  
Friction Velocity ◽  
Turbulent Channel Flow ◽  
Navier Stokes ◽  
Gradient Term ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Mean Pressure ◽  
Les Model

The log-layer mismatch arises when a Reynolds-averaged Navier-Stokes (RANS) model is blended with a large-eddy simulation (LES) model in a hybrid fashion. Numerous researchers have tackled this problem by simulating a turbulent channel flow. We show that the log-layer mismatch in hybrid RANS-LES can be reduced substantially by splitting the mean pressure gradient term in the wall-normal direction in a manner that keeps the mass flow rate constant. Additionally, an analysis of the wall-normal variation of the friction velocity shows a constant value is recovered in the resolved LES region different than the value at the wall. Second-order turbulence statistics agree very well with direct numerical simulation (DNS) benchmarks when scaled with the friction velocity extracted from the resolved LES region. In light of our findings, we suggest that the current convention to drive a turbulent periodic channel flow with a uniform mean pressure gradient be revisited in testing eddy-viscosity-based hybrid RANS-LES models as it appears to be the culprit behind the log-layer mismatch.

scholarly journals Predictive Large Eddy Simulation for Jet Aeroacoustics–Current Approach and Industrial Application

2017 ◽  
Vol 139 (8) ◽  
Author(s):  
James Tyacke ◽  
Iftekhar Naqavi ◽  
Zhong-Nan Wang ◽  
Paul Tucker ◽  
Peer Boehning
Keyword(s):  
Numerical Methods ◽  
Large Eddy Simulation ◽  
Jet Noise ◽  
Current Approach ◽  
Navier Stokes ◽  
Jet Flows ◽  
Installation Effects ◽  
Eddy Simulation ◽  
Large Eddy ◽  
The Cost

The major techniques for measuring jet noise have significant drawbacks, especially when including engine installation effects such as jet–flap interaction noise. Numerical methods including low order correlations and Reynolds-averaged Navier–Stokes (RANS) are known to be deficient for complex configurations and even simple jet flows. Using high fidelity numerical methods such as large eddy simulation (LES) allows conditions to be carefully controlled and quantified. LES methods are more practical and affordable than experimental campaigns. The potential to use LES methods to predict noise, identify noise risks, and thus modify designs before an engine or aircraft is built is a possibility in the near future. This is particularly true for applications at lower Reynolds numbers such as jet noise of business jets and jet-flap interaction noise for under-wing engine installations. Hence, we introduce our current approaches to predicting jet noise reliably and contrast the cost of RANS–numerical-LES (RANS–NLES) with traditional methods. Our own predictions and existing literature are used to provide a current guide, encompassing numerical aspects, meshing, and acoustics processing. Other approaches are also briefly considered. We also tackle the crucial issues of how codes can be validated and verified for acoustics and how LES-based methods can be introduced into industry. We consider that hybrid RANS–(N)LES is now of use to industry and contrast costs, indicating the clear advantages of eddy resolving methods.

scholarly journals LES and RANS Investigations Into Buoyancy-Affected Convection in a Rotating Cavity With a Central Axial Throughflow

2006 ◽  
Vol 129 (2) ◽  
pp. 318-325 ◽  
Author(s):  
Zixiang Sun ◽  
Klas Lindblad ◽  
John W. Chew ◽  
Colin Young
Keyword(s):  
Tangential Velocity ◽  
Rotating Disk ◽  
Navier Stokes ◽  
Test Cases ◽  
Eddy Simulation ◽  
Rotating Cavity ◽  
Large Eddy ◽  
Rans Modeling ◽  
Les Model ◽  
Compressor Disk

The buoyancy-affected flow in rotating disk cavities, such as occurs in compressor disk stacks, is known to be complex and difficult to predict. In the present work, large eddy simulation (LES) and unsteady Reynolds-averaged Navier-Stokes (RANS) solutions are compared to other workers’ measurements from an engine representative test rig. The Smagorinsky-Lilly model was employed in the LES simulations, and the RNG k-ε turbulence model was used in the RANS modeling. Three test cases were investigated in a range of Grashof number Gr=1.87 to 7.41×108 and buoyancy number Bo=1.65 to 11.5. Consistent with experimental observation, strong unsteadiness was clearly observed in the results of both models; however, the LES results exhibited a finer flow structure than the RANS solution. The LES model also achieved significantly better agreement with velocity and heat transfer measurements than the RANS model. Also, temperature contours obtained from the LES results have a finer structure than the tangential velocity contours. Based on the results obtained in this work, further application of LES to flows of industrial complexity is recommended.

Sign in / Sign up

Export Citation Format

Share Document