scholarly journals Volumetric Stress-Strain Analysis of Optohydrodynamically Suspended Biological Cells

2010 ◽  
Vol 133 (1) ◽  
Author(s):  
Sean S. Kohles ◽  
Yu Liang ◽  
Asit K. Saha
Keyword(s):  
Single Cells ◽  
Strain Analysis ◽  
Optical Tweezer ◽  
Three Dimensions ◽  
Shear Stresses ◽  
Strain Response ◽  
Biological Cells ◽  
Two Dimensional ◽  
Stress Strain ◽  
Volumetric Stress

Ongoing investigations are exploring the biomechanical properties of isolated and suspended biological cells in pursuit of understanding single-cell mechanobiology. An optical tweezer with minimal applied laser power has positioned biologic cells at the geometric center of a microfluidic cross-junction, creating a novel optohydrodynamic trap. The resulting fluid flow environment facilitates unique multiaxial loading of single cells with site-specific normal and shear stresses resulting in a physical albeit extensional state. A recent two-dimensional analysis has explored the cytoskeletal strain response due to these fluid-induced stresses [Wilson and Kohles, 2010, “Two-Dimensional Modeling of Nanomechanical Stresses-Strains in Healthy and Diseased Single-Cells During Microfluidic Manipulation,” J Nanotechnol Eng Med, 1(2), p. 021005]. Results described a microfluidic environment having controlled nanometer and piconewton resolution. In this present study, computational fluid dynamics combined with multiphysics modeling has further characterized the applied fluid stress environment and the solid cellular strain response in three dimensions to accompany experimental cell stimulation. A volumetric stress-strain analysis was applied to representative living cell biomechanical data. The presented normal and shear stress surface maps will guide future microfluidic experiments as well as provide a framework for characterizing cytoskeletal structure influencing the stress to strain response.

Delamination in the scoring and folding of paperboard

TAPPI Journal ◽  
2012 ◽  
Vol 11 (1) ◽  
pp. 61-66 ◽  
Author(s):  
DOEUNG D. CHOI ◽  
SERGIY A. LAVRYKOV ◽  
BANDARU V. RAMARAO
Keyword(s):  
Finite Element ◽  
Plane Deformation ◽  
Strain Analysis ◽  
Local Strain ◽  
Uniaxial Stress ◽  
Material Model ◽  
Element Model ◽  
Plastic Behavior ◽  
Stress Strain ◽  
Strain Fields

Delamination between layers occurs during the creasing and subsequent folding of paperboard. Delamination is necessary to provide some stiffness properties, but excessive or uncontrolled delamination can weaken the fold, and therefore needs to be controlled. An understanding of the mechanics of delamination is predicated upon the availability of reliable and properly calibrated simulation tools to predict experimental observations. This paper describes a finite element simulation of paper mechanics applied to the scoring and folding of multi-ply carton board. Our goal was to provide an understanding of the mechanics of these operations and the proper models of elastic and plastic behavior of the material that enable us to simulate the deformation and delamination behavior. Our material model accounted for plasticity and sheet anisotropy in the in-plane and z-direction (ZD) dimensions. We used different ZD stress-strain curves during loading and unloading. Material parameters for in-plane deformation were obtained by fitting uniaxial stress-strain data to Ramberg-Osgood plasticity models and the ZD deformation was modeled using a modified power law. Two-dimensional strain fields resulting from loading board typical of a scoring operation were calculated. The strain field was symmetric in the initial stages, but increasing deformation led to asymmetry and heterogeneity. These regions were precursors to delamination and failure. Delamination of the layers occurred in regions of significant shear strain and resulted primarily from the development of large plastic strains. The model predictions were confirmed by experimental observation of the local strain fields using visual microscopy and linear image strain analysis. The finite element model predicted sheet delamination matching the patterns and effects that were observed in experiments.

Stress-Strain Analysis and Simulation for Estimation of Cutting Forces on the Skin

2015 ◽  
Vol 9 (6) ◽  
pp. 583
Author(s):  
Dario German Buitrago ◽  
Luis Carlos Ruíz ◽  
Olga Lucia Ramos
Keyword(s):  
Cutting Forces ◽  
Strain Analysis ◽  
Stress Strain

Experimental Characterization of Mechanical Behavior of Cord-Rubber Composites

1982 ◽  
Vol 10 (1) ◽  
pp. 37-54 ◽  
Author(s):  
M. Kumar ◽  
C. W. Bert
Keyword(s):  
Response Characteristic ◽  
Cord Compression ◽  
Complete Characterization ◽  
Strain Response ◽  
Strain Gages ◽  
Experimental Characterization ◽  
Rubber Composites ◽  
Stress Strain ◽  
Strain Data

Abstract Unidirectional cord-rubber specimens in the form of tensile coupons and sandwich beams were used. Using specimens with the cords oriented at 0°, 45°, and 90° to the loading direction and appropriate data reduction, we were able to obtain complete characterization for the in-plane stress-strain response of single-ply, unidirectional cord-rubber composites. All strains were measured by means of liquid mercury strain gages, for which the nonlinear strain response characteristic was obtained by calibration. Stress-strain data were obtained for the cases of both cord tension and cord compression. Materials investigated were aramid-rubber, polyester-rubber, and steel-rubber.

scholarly journals BMS field theories and Weyl anomaly

2021 ◽  
Vol 2021 (7) ◽  
Author(s):  
Arjun Bagchi ◽  
Sudipta Dutta ◽  
Kedar S. Kolekar ◽  
Punit Sharma
Keyword(s):  
Three Dimensions ◽  
Field Theories ◽  
Partition Functions ◽  
Two Dimensional ◽  
Speed Of Light ◽  
Asymptotically Flat ◽  
Weyl Invariance ◽  
Flat Spacetimes ◽  
Liouville Action ◽  
Null Surfaces

Abstract Two dimensional field theories with Bondi-Metzner-Sachs symmetry have been proposed as duals to asymptotically flat spacetimes in three dimensions. These field theories are naturally defined on null surfaces and hence are conformal cousins of Carrollian theories, where the speed of light goes to zero. In this paper, we initiate an investigation of anomalies in these field theories. Specifically, we focus on the BMS equivalent of Weyl invariance and its breakdown in these field theories and derive an expression for Weyl anomaly. Considering the transformation of partition functions under this symmetry, we derive a Carrollian Liouville action different from ones obtained in the literature earlier.

scholarly journals P19.01: Application of different frame rates in two-dimensional speckle-tracking in fetal echocardiography and their influence on strain analysis

2017 ◽  
Vol 50 ◽  
pp. 214-214
Author(s):  
C. Enzensberger ◽  
L. Rostock ◽  
F. Achterberg ◽  
O. Graupner ◽  
A. Wolter ◽  
...  
Keyword(s):  
Speckle Tracking ◽  
Fetal Echocardiography ◽  
Strain Analysis ◽  
Two Dimensional
Sign in / Sign up

Export Citation Format

Share Document