Temperature Created by a Tilted Moving Heat Source: Heating Line and Cylinder

2010 ◽  
Vol 133 (2) ◽  
Author(s):  
Valerian Nemchinsky
Keyword(s):  
Heat Source ◽  
Tilt Angle ◽  
Narrow Range ◽  
Numerical Calculations ◽  
Moving Heat Source ◽  
Shape Variation ◽  
Method Of Calculation ◽  
Tilted Line ◽  
Analytical Expressions

Temperatures created by a moving tilted line and a moving tilted cylinder are considered. Analytical expressions for low Peclet (Pe⪡1) and high Peclet (Pe⪢1) numbers are obtained for the whole range of possible tilt angles. These expressions almost overlap: It is shown that these analytical expressions describe very well the results of numerical calculations at any Peclet numbers except for a very narrow range of Pe close to unity. A method of calculation of the cut shape (variation of the tilt angle inside the cut) is discussed.

scholarly journals Analysis of hyperbolic Pennes bioheat equation in perfused homogeneous biological tissue subject to the instantaneous moving heat source

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Ali Kabiri ◽  
Mohammad Reza Talaee
Keyword(s):  
Heat Source ◽  
Closed Form ◽  
Method Comparison ◽  
Closed Form Solution ◽  
Form Solution ◽  
Temperature Profiles ◽  
Moving Heat Source ◽  
Bioheat Equation ◽  
Perfusion Rate

AbstractThe one-dimensional hyperbolic Pennes bioheat equation under instantaneous moving heat source is solved analytically based on the Eigenvalue method. Comparison with results of in vivo experiments performed earlier by other authors shows the excellent prediction of the presented closed-form solution. We present three examples for calculating the Arrhenius equation to predict the tissue thermal damage analysis with our solution, i.e., characteristics of skin, liver, and kidney are modeled by using their thermophysical properties. Furthermore, the effects of moving velocity and perfusion rate on temperature profiles and thermal tissue damage are investigated. Results illustrate that the perfusion rate plays the cooling role in the heating source moving path. Also, increasing the moving velocity leads to a decrease in absorbed heat and temperature profiles. The closed-form analytical solution could be applied to verify the numerical heating model and optimize surgery planning parameters.

Temperature field in a hollow finite-length cylinder with an arbitrarily moving heat source

1972 ◽  
Vol 22 (3) ◽  
pp. 381-385 ◽  
Author(s):  
L. A. Brichkin ◽  
Yu. V. Darinskii ◽  
L. M. Pustyl'nikov
Keyword(s):  
Temperature Field ◽  
Heat Source ◽  
Finite Length ◽  
Moving Heat Source

Generalized Thermoelastic Responses of a Piezoelectric Rod Subjected to a Moving Heat Source

2007 ◽  
Vol 353-358 ◽  
pp. 1149-1152
Author(s):  
Tian Hu He ◽  
Li Cao
Keyword(s):  
Numerical Calculation ◽  
Heat Source ◽  
Laplace Transformation ◽  
Moving Heat Source ◽  
Governing Equations ◽  
Laplace Inversion ◽  
Thermally Induced ◽  
Numerical Laplace Inversion ◽  
Generalized Thermoelastic ◽  
Elastic Responses

Based on the Lord and Shulman generalized thermo-elastic theory, the dynamic thermal and elastic responses of a piezoelectric rod fixed at both ends and subjected to a moving heat source are investigated. The generalized piezoelectric-thermoelastic coupled governing equations are formulated. By means of Laplace transformation and numerical Laplace inversion the governing equations are solved. Numerical calculation for stress, displacement and temperature within the rod is carried out and displayed graphically. The effect of moving heat source speed on temperature, stress and temperature is studied. It is found from the distributions that the temperature, thermally induced displacement and stress of the rod are found to decrease at large source speed.

scholarly journals Theoretical Development of Thermal Buckling Phenomenon of Thin-Walled Plate due to Moving Heat Source.

1999 ◽  
Vol 42 (4) ◽  
pp. 499-506 ◽  
Author(s):  
Ryusuke KAWAMURA ◽  
Yoshinobu TANIGAWA ◽  
Hideki WATANABE ◽  
Katsuyuki YAMASAKI
Keyword(s):  
Heat Source ◽  
Thermal Buckling ◽  
Theoretical Development ◽  
Moving Heat Source ◽  
Thin Walled

Thermodynamic behaviour of microstretch viscoelastic solids with internal heat source

2014 ◽  
Vol 92 (5) ◽  
pp. 425-434 ◽  
Author(s):  
Sunita Deswal ◽  
Renu Yadav
Keyword(s):  
Heat Source ◽  
Normal Mode Analysis ◽  
Generalized Thermoelasticity ◽  
Internal Heat ◽  
Internal Heat Source ◽  
Mode Analysis ◽  
Moving Heat Source ◽  
Line Heat Source ◽  
Epoxy Material ◽  
Mech Phys Solid

The dynamical interactions caused by a line heat source moving inside a homogeneous isotropic thermo-microstretch viscoelastic half space, whose surface is subjected to a thermal load, are investigated. The formulation is in the context of generalized thermoelasticity theories proposed by Lord and Shulman (J. Mech. Phys. Solid, 15, 299 (1967)) and Green and Lindsay (Thermoelasticity, J. Elasticity, 2, 1 (1972)). The surface is assumed to be traction free. The solutions in terms of displacement components, mechanical stresses, temperature, couple stress, and microstress distribution are procured by employing the normal mode analysis. The numerical estimates of the considered variables are obtained for an aluminium–epoxy material. The results obtained are demonstrated graphically to show the effect of moving heat source and viscosity on the displacement, stresses, and temperature distribution.

A Scalable Framework for Process-Aware Thermal Simulation of Additive Manufacturing Processes

2021 ◽  
pp. 1-16
Author(s):  
Yaqi Zhang ◽  
Vadim Shapiro ◽  
Paul Witherell
Keyword(s):  
Additive Manufacturing ◽  
Heat Source ◽  
Spatial Data ◽  
Manufacturing Process ◽  
Thermal Simulation ◽  
Physical Parameters ◽  
Moving Heat Source ◽  
Time Step ◽  
Fused Deposition ◽  
Am Processes

Abstract Many additive manufacturing (AM) processes are driven by a moving heat source. Thermal field evolution during the manufacturing process plays an important role in determining both geometric and mechanical properties of the fabricated parts. Thermal simulation of AM processes is challenging due to the geometric complexity of the manufacturing process and inherent computational complexity that requires a numerical solution at every time increment of the process. We propose a new general computational framework that supports scalable thermal simulation at path scale of any AM process driven by a moving heat source. The proposed framework has three novel ingredients. First, the path-level discretization is process-aware, which is based on the manufacturing primitives described by the scan path and the thermal model is formulated directly in terms of manufacturing primitives. Second, a spatial data structure, called contact graph, is used to represent the discretized domain and capture all possible thermal interactions during the simulation. Finally, the simulation is localized based on specific physical parameters of the manufacturing process, requiring at most a constant number of updates at each time step. The latter implies that the constructed simulation not only scales to handle three-dimensional (3D) printed components of arbitrary complexity but also can achieve real-time performance. To demonstrate the efficacy and generality of the framework, it has been successfully applied to build thermal simulations of two different AM processes, fused deposition modeling (FDM) and powder bed fusion (PBF).

Transient Temperature Involving Oscillatory Heat Source With Application in Fretting Contact

2007 ◽  
Vol 129 (3) ◽  
pp. 517-527 ◽  
Author(s):  
Jun Wen ◽  
M. M. Khonsari
Keyword(s):  
Heat Source ◽  
Oscillation Amplitude ◽  
The Body ◽  
Transient Temperature ◽  
Dimensionless Frequency ◽  
Heat Sources ◽  
Infinite Body ◽  
Fitting Method ◽  
Wide Range ◽  
Analytical Expressions

An analytical approach for treating problems involving oscillatory heat source is presented. The transient temperature profile involving circular, rectangular, and parabolic heat sources undergoing oscillatory motion on a semi-infinite body is determined by integrating the instantaneous solution for a point heat source throughout the area where the heat source acts with an assumption that the body takes all the heat. An efficient algorithm for solving the governing equations is developed. The results of a series simulations are presented, covering a wide range of operating parameters including a new dimensionless frequency ω¯=ωl2∕4α and the dimensionless oscillation amplitude A¯=A∕l, whose product can be interpreted as the Peclet number involving oscillatory heat source, Pe=ω¯A¯. Application of the present method to fretting contact is presented. The predicted temperature is in good agreement with published literature. Furthermore, analytical expressions for predicting the maximum surface temperature for different heat sources are provided by a surface-fitting method based on an extensive number of simulations.

Closed-Form Expression for Temperature in a Semi-Infinite Solid Due to a Fast Moving Surface Heat Source

1991 ◽  
Vol 113 (4) ◽  
pp. 828-831 ◽  
Author(s):  
J. A. Tichy
Keyword(s):  
Heat Source ◽  
Closed Form ◽  
Frictional Contact ◽  
Closed Form Expression ◽  
Moving Heat Source ◽  
Convolution Integral ◽  
Form Expression ◽  
Exponential Integral ◽  
Surface Conditions ◽  
Closed Form Solutions

In the thermal analysis of an asperity on a sliding surface in frictional contact with an opposing surface, conditions are often idealized as a moving heat source. The solution to this problem at arbitrary Pe´cle´t number in terms of a singular integral is well known. In this study, closed-form solutions are found in terms of the exponential integral for high Pe´cle´t number. Fortunately, the closed-form solutions are accurate at Pe´cle´t number of order one. While several restrictions are necessary, the closed-form expressions offer considerable numerical savings relative to evaluations of the convolution integral.

Sign in / Sign up

Export Citation Format

Share Document