Using Multicell Kelvin Structure for Pressure Vessel

2011 ◽  
Vol 133 (1) ◽  
Author(s):  
P. Zhang ◽  
R. Du
Keyword(s):  
Pressure Vessel ◽  
Storage Capacity ◽  
Low Cost ◽  
Excellent Performance ◽  
Single Cylinder ◽  
Design And Manufacturing

Pressure vessel is widely used in many engineering areas. How to achieve a perfect combination of excellent performance and low cost in the design and manufacturing of a pressure vessel is, therefore, very important. Instead of a single cylinder, a multicell pressure vessel with a Kelvin structure is proposed in this paper. It is found that such structure offers not only improved safety but also extra storage capacity. This may lead to a type of pressure vessel suitable for stringent applications, even without employing costly materials.

scholarly journals Design and Manufacturing of a Disposable, Cyclo-Olefin Copolymer, Microfluidic Device for a Biosensor †

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang
Keyword(s):  
Microfluidic Device ◽  
Heating Temperature ◽  
Low Cost ◽  
Reaction Chamber ◽  
Microfluidic System ◽  
Heating Process ◽  
Design And Manufacturing ◽  
On Chip ◽  
Working Parameters ◽  
Auto Fluorescence

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.

scholarly journals Utility-Scale PV-Battery versus CSP-Thermal Storage in Morocco: Storage and Cost Effect under Penetration Scenarios

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4675
Author(s):  
Ayat-allah Bouramdane ◽  
Alexis Tantet ◽  
Philippe Drobinski
Keyword(s):  
Storage Capacity ◽  
Low Cost ◽  
Thermal Storage ◽  
Solar Pv ◽  
Storage Duration ◽  
Maximum Cost ◽  
Pv Inverter ◽  
The Mean ◽  
Mean Variance Portfolio ◽  
Utility Scale

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified.

scholarly journals Defect and Doping Co-Engineered Non-Metal Nanocarbon ORR Electrocatalyst

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Jian Zhang ◽  
Jingjing Zhang ◽  
Feng He ◽  
Yijun Chen ◽  
Jiawei Zhu ◽  
...  
Keyword(s):  
Rational Design ◽  
Low Cost ◽  
Reduction Reaction ◽  
Defect Engineering ◽  
Heteroatom Doping ◽  
Competitive Activity ◽  
Design And Manufacturing ◽  
Earth Abundant ◽  
Induced Defects ◽  
Carbon Based

AbstractExploring low-cost and earth-abundant oxygen reduction reaction (ORR) electrocatalyst is essential for fuel cells and metal–air batteries. Among them, non-metal nanocarbon with multiple advantages of low cost, abundance, high conductivity, good durability, and competitive activity has attracted intense interest in recent years. The enhanced ORR activities of the nanocarbons are normally thought to originate from heteroatom (e.g., N, B, P, or S) doping or various induced defects. However, in practice, carbon-based materials usually contain both dopants and defects. In this regard, in terms of the co-engineering of heteroatom doping and defect inducing, we present an overview of recent advances in developing non-metal carbon-based electrocatalysts for the ORR. The characteristics, ORR performance, and the related mechanism of these functionalized nanocarbons by heteroatom doping, defect inducing, and in particular their synergistic promotion effect are emphatically analyzed and discussed. Finally, the current issues and perspectives in developing carbon-based electrocatalysts from both of heteroatom doping and defect engineering are proposed. This review will be beneficial for the rational design and manufacturing of highly efficient carbon-based materials for electrocatalysis.

scholarly journals Improving the Downwind Sail Design Process by Means of a Novel FSI Approach

2021 ◽  
Vol 9 (6) ◽  
pp. 624
Author(s):  
Antonino Cirello ◽  
Tommaso Ingrassia ◽  
Antonio Mancuso ◽  
Vincenzo Nigrelli ◽  
Davide Tumino
Keyword(s):  
Numerical Methods ◽  
Low Cost ◽  
The Novel ◽  
The Real ◽  
Weakly Coupled ◽  
Design And Manufacturing ◽  
Sailing Yacht ◽  
Computational Resources ◽  
Effective Use

The process of designing a sail can be a challenging task because of the difficulties in predicting the real aerodynamic performance. This is especially true in the case of downwind sails, where the evaluation of the real shapes and aerodynamic forces can be very complex because of turbulent and detached flows and the high-deformable behavior of structures. Of course, numerical methods are very useful and reliable tools to investigate sail performances, and their use, also as a result of the exponential growth of computational resources at a very low cost, is spreading more and more, even in not highly competitive fields. This paper presents a new methodology to support sail designers in evaluating and optimizing downwind sail performance and manufacturing. A new weakly coupled fluid–structure interaction (FSI) procedure has been developed to study downwind sails. The proposed method is parametric and automated and allows for investigating multiple kinds of sails under different sailing conditions. The study of a gennaker of a small sailing yacht is presented as a case study. Based on the numerical results obtained, an analytical formulation for calculating the sail corner loads has been also proposed. The novel proposed methodology could represent a promising approach to allow for the widespread and effective use of numerical methods in the design and manufacturing of yacht sails.

scholarly journals Synthesis of Novel ZnO Having Cauliflower Morphology for Photocatalytic Degradation Study

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Dipak Nipane ◽  
S. R. Thakare ◽  
N. T. Khati
Keyword(s):  
Photocatalytic Degradation ◽  
Material Properties ◽  
Low Cost ◽  
Environmental Applications ◽  
Zno Nanowire ◽  
Excellent Performance ◽  
Degradation Study ◽  
Unique Material ◽  
Photocatalytic Applications

ZnO nanowire morphology has been widely studied due to its unique material properties and excellent performance in electronics, optics, and photonic. Recently, photocatalytic applications of ZnO nanowire are creating an increasing interest in the environmental applications. This paper presents a low-cost and ecofriendly synthesis of ZnO with cauliflower morphology and its effectiveness in photocatalysis.

Efficient and Robust Approach for Heartbeat Detection of ECG Signal

2019 ◽  
Vol 29 (08) ◽  
pp. 2050133
Author(s):  
Anas Fouad Ahmed ◽  
Mohammed Abdulmunem Ahmed ◽  
Hussain Mustafa Bierk
Keyword(s):  
Real Time ◽  
Low Cost ◽  
Suggested Method ◽  
The Other ◽  
Ecg Signal ◽  
Excellent Performance ◽  
Robust Approach ◽  
Different Types ◽  
Three Stages ◽  
Electrocardiogram Ecg

This paper introduces an efficient and robust method for heartbeat detection based on the calculated angles between the successive samples of electrocardiogram (ECG) signal. The proposed approach involves three stages: filtering, computing the angles of the signal and thresholding. The suggested method is applied to two different types of ECG databases (QTDB and MIT-BIH). The results were compared with the other algorithms suggested in previous works. The proposed approach outperformed the other algorithms, in spite of its simplicity and their fast calculations. These features make it applicable in real-time ECG diagnostics systems. The suggested method was implemented in real-time using a low cost ECG acquisition system and it shows excellent performance.

Time Slicing Method

2011 ◽  
pp. 272-279
Author(s):  
Phillip K.C. Tse
Keyword(s):  
High Throughput ◽  
Storage Capacity ◽  
Low Cost ◽  
Storage Devices ◽  
Access Latency ◽  
Tertiary Storage ◽  
Start Up ◽  
Slicing Method ◽  
Time Slicing

Tertiary storage devices provide huge storage capacity at low cost. Multimedia objects stored on the tertiary storage devices are accessed with high latency. Despite the high access latency, some tertiary storage devices are able to deliver data at high throughput. The time slicing method is designed to reduce the start-up latency in accessing multimedia objects from tertiary storage devices. The start-up latency is lowered by reducing the amount of data being migrated in stage one of the staging method being described in the last chapter. In order to support the time-slicing method, the tertiary storage devices should have the ability to deliver data at high throughput. The tertiary storage devices that cannot deliver data at sufficiently high throughput; the start-up latency cannot be reduced.

Tertiary Storage Devices

2011 ◽  
pp. 145-155
Author(s):  
Phillip K.C. Tse
Keyword(s):  
New Media ◽  
Computer System ◽  
Storage Capacity ◽  
Storage Systems ◽  
Low Cost ◽  
Storage Devices ◽  
Tertiary Storage ◽  
Hierarchical Storage ◽  
The Media ◽  
Optical Disks

The main objective of the tertiary storage level is to provide huge storage capacity at low cost. Several types of storage devices are available to be used at the tertiary storage level in Hierarchical Storage Systems (HSS). They include: • Magnetic tapes • Optical disks • Optical tapes These storage devices are composed of fixed storage drives and removable media units. The storage drives are fixed to the computer system. The removable media unit can be removed from the drives so that the storage capacity can be expanded with more media units. When data on a media are accessed, the media unit is accessed from their normal location. One of the storage drives on the computer system is chosen. If there is a media unit in the storage drive, the old media unit is unloaded and ejected. The new media unit is then loaded to the drive. Each type of storage drive may handle the storage drives and media units differently. The magnetic tapes are described below in the next section. Then, the optical tapes are presented. Afterwards, the optical disks are briefly described before this chapter is summarized.

First principles study of a SnS2/graphene heterostructure: a promising anode material for rechargeable Na ion batteries

2016 ◽  
Vol 4 (37) ◽  
pp. 14316-14323 ◽  
Author(s):  
Abdus Samad ◽  
Mohammad Noor-A-Alam ◽  
Young-Han Shin
Keyword(s):  
Ionic Conductivity ◽  
Anode Material ◽  
First Principles ◽  
Storage Capacity ◽  
Mechanical Stability ◽  
Low Cost ◽  
High Potential ◽  
First Principles Study

The low cost, high Na storage capacity, high electronic and ionic conductivity, nontoxic nature, and enhanced mechanical stability of the SnS2/graphene heterostructure show the high potential of this material as a commercial anode material for Na ion batteries.

Sign in / Sign up

Export Citation Format

Share Document