Thermal Protection System for Underwater Use in Cold and Hot Water

Author(s):  
Joseph C. Mollendorf ◽  
David R. Pendergast

Underwater workers, sport and military divers, are exposed to thermal stress since most of the waters of the world are below or above what is thermally neutral. Although divers wear insulation suits for passive thermal protection they are inadequate. Active heating is currently accomplished by resistive heating and open-flow tubes delivering hot water; however, these methods are problematic. The challenge of this project was to design, build and test an active diver thermal protection system (DTPS) to be used with wet suit insulation that is effective, user-friendly, reliable, and that could be used by a free-swimming diver. The DTPS has a minimum number of moving parts, is low maintenance, has no unsafe or toxic working fluid and uses no consumables except a safe, high density, modular electrical power source. A portable and swimmable, self-contained, electrically powered unit (DTPS) has been designed, built, and tested that produces and circulates thermally conditioned water in a closed-loop through a zoned tube suit worn by a diver under a wetsuit to maintain skin and body core temperatures within prescribed safe limits. The system has been validated by using physiological data taken on human subjects over a wide range of ambient water temperatures. Corresponding enthalpy and electrical power measurements were used as the basis of a thermodynamic analysis. The DTPS maintained skin and body core temperatures within safe and functional ranges by providing up to about 200 W of heating in cold water and up to about 330 W of cooling in hot water. The corresponding electrical power consumption was up to about 300 W in cold water and up to about 1500 W in hot water. The results of a complete audit of the power use and heat transfer are presented along with the efficiency of the thermoelectric heating/cooling modules and the duty cycle of the system for a range of water immersion temperatures from 10°C to 39°C. The DTPS proved to be an effective and reliable apparatus for diver thermal protection in water temperatures from 10°C to 39°C, which covers most of the range of the earth’s waters. The data presented here can be used to modify the design of the DTPS to meet specific needs of the diving community.

2012 ◽  
Vol 710 ◽  
pp. 197-202 ◽  
Author(s):  
Hanamantray Baluragi ◽  
V. Anil Kumar ◽  
K. Narasaiah ◽  
Shibu Gopinath ◽  
P.P. Sinha

Metallic thermal protection system (MTPS) offers significant improvements over the ceramic based TPS for reentry applications. Space shuttle refurbishment time is estimated to be around 17000 man hours between flights. Metallic based TPS can be fabricated easily and provides wide range of design options for TPS. Adaptability and robustness of metallic thermal protection systems offers the potential for reusability. In this work, a unique manufacturing process has been evolved to realize light weight honeycomb panels through corrugation, laser welding and diffusion brazing of faceplates, where in 50 micron thick Inconel718 foil is used for making honeycomb core and 0.2mm thick Inconel718 foil as faceplates. The compression and three point bend test on these panels have shown no debond between faceplates and honeycomb core. 150x150x5mm size honeycomb panels were coated with YSZ and NiCrAlY based Thermal Barrier Coatings (TBC) and high temperature tests have shown thermal resistance of around 570 °C with front wall temperature of 1186 °C and back wall of 533 °C. Also these panels have been characterized for reusability by the testing of same panel at different heat flux levels. Though it is found that honeycomb panel has shown its integrity without debond a certain acceptable level of degradation in coating is observed. Thus Inconel718 based honeycomb panels with TBC coating are proved for use as thermal protection system for reusable launch vehicle systems.


Author(s):  
Toshiyuki SUZUKI ◽  
Yuki KUBOTA ◽  
Yuichi ISHIDA ◽  
Takuya AOKI ◽  
Kazuhisa FUJITA ◽  
...  

2002 ◽  
Author(s):  
M. Blosser ◽  
R. Chen ◽  
I. Schmidt ◽  
J. Dorsey ◽  
C. Poteet ◽  
...  

2010 ◽  
Vol 30 (8) ◽  
pp. 1833-1840 ◽  
Author(s):  
S. Biamino ◽  
A. Antonini ◽  
C. Eisenmenger-Sittner ◽  
L. Fuso ◽  
M. Pavese ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document