Static Joint Torque Determination of a Human Model for Standing and Seating Tasks Considering Balance

2010 ◽  
Vol 2 (3) ◽  
Author(s):  
Jingzhou (James) Yang ◽  
Joo H. Kim
Keyword(s):  
Material Handling ◽  
Weight Lifting ◽  
Joint Torque ◽  
Human Model ◽  
Computational Time ◽  
Joint Torques ◽  
Human Models ◽  
Support Reaction ◽  
The Stability ◽  
Physics Based Simulation

Estimation of the risk of injury to human different joints during occupational tasks plays an important role to reduce injuries before the operators carry out the tasks. This paper presents a methodology for determining the static joint torques of a human model considering balance for both standing and seating tasks such as weight lifting, material handling, and seated operating tasks in the assembly line. A high fidelity human model has been developed, and recursive dynamics has been used to formulate the static equation of motion. An alternative and efficient formulation of the zero-moment point for static balance and the approximated (ground/seat) support reaction forces/moments are derived from the resultant reaction loads, which includes the gravity and externally applied loads. The proposed method can be used for both standing and seating tasks for assessing the stability/balance of the posture. The proposed formulation can be beneficial to physics-based simulation of humanoids and human models. Also, the calculated joint torques can be considered as an indicator to assess the risks of injuries when human models perform various tasks. The computational time for each case is close to 0.015 s.

Determining the Static Joint Torques of a Digital Human Model Considering Balance

2009 ◽  
Author(s):  
Jingzhou James Yang ◽  
Yujiang Xiang ◽  
Joo Kim
Keyword(s):  
Human Model ◽  
Joint Torques ◽  
Digital Human Model ◽  
Human Models ◽  
Support Reaction ◽  
Reaction Forces ◽  
Zero Moment ◽  
The Stability ◽  
Physics Based Simulation ◽  
Digital Human

This paper presents a methodology for determining the static joint torques of a digital human model considering balance for both standing and seating tasks. An alternative and efficient formulation of the Zero-Moment Point (ZMP) for static balance and the approximated (ground/seat) support reaction forces/moments are derived from the resultant reaction loads, which includes the gravity and externally applied loads. The proposed method can be used for both standing and seating tasks for assessing the stability/balance of the posture. The proposed formulation can be beneficial to physics-based simulation of humanoids and human models. Also, the calculated joint torques can be considered as an indicator to assess the risks of injuries when human models perform various tasks.

Lifting Posture Analysis in Material Handling Using Virtual Humans

2005 ◽  
Author(s):  
Joo H. Kim ◽  
Karim Abdel-Malek ◽  
Jingzhou Yang ◽  
Timothy Marler ◽  
Kyle Nebel
Keyword(s):  
Material Handling ◽  
Equations Of Motion ◽  
Prediction Method ◽  
Metabolic Energy ◽  
Joint Torque ◽  
Human Model ◽  
Risk Level ◽  
Posture Analysis ◽  
Joint Torques ◽  
Digital Human

Adopting appropriate postures during manual material-handling tasks is the key to reducing human joint injuries. Although much experimentation has been conducted in an effort to model lifting, such an approach is not general enough to consider all potential scenarios in material handling. Thus, in this paper an optimization-based motion prediction method is used to simulate realistic lifting postures and predict joint torques to evaluate the risk level of injury. A kinematically realistic digital human model has been developed such that the complicated musculoskeletal human structure is modeled as a combination of serial chains using the generalized coordinates. Lagrange’s equations of motion and metabolic energy rate are derived for the digital human. The proposed method has been implemented to predict and evaluate the lifting postures based on the metabolic rate and joint torques. Our results show that different amount of external loads and tasks lead to different human postures and joint torque distribution, thus different risk level of injury.

Optimization-Based Seated Posture Prediction Considering Contact With Environment

2011 ◽  
Author(s):  
Brad Howard ◽  
Jingzhou James Yang
Keyword(s):  
Center Of Pressure ◽  
Optimization Techniques ◽  
The Body ◽  
Human Model ◽  
Joint Torques ◽  
Pressure Mapping ◽  
Support Reaction ◽  
Posture Prediction ◽  
Reaction Forces ◽  
Recursive Dynamics

People can spend much of everyday completing seated tasks. Therefore it is important to understand postures needed to complete seated tasks, and the associated environmental contacts. This paper presents a method to predict seated postures and the general forces needed in order to support resulting postural configurations. This study uses optimization techniques to predict human posture based on a 56 degree of freedom (DOF) 50th percentile female human model. The support reaction forces (SRFs) are predicted using joint torques and the zero-moment point (ZMP) formulation derived from the Lagrangian recursive dynamics. The SRFs are applied at points on the body based on center of pressure (COP) locations gathered from pressure mapping experiments. The specific application points include the two feet, the two thighs, and back. Multiple seated orientations based on an experimental study found in published literature are simulated. When comparing these simulation results to the literature data, a good correlation can be established, which provides an initial validation of the proposed methods.

scholarly journals Evaluation of 3-Axial Knee Joint Torques Produced by Compression Sports Tights in Running Motion

Proceedings ◽  
2020 ◽  
Vol 49 (1) ◽  
pp. 69
Author(s):  
Taisei Mori ◽  
Yohei Ogino ◽  
Akihiro Matsuda ◽  
Yumiko Funabashi
Keyword(s):  
Computer Graphics ◽  
Knee Joint ◽  
Numerical Simulations ◽  
Human Subjects ◽  
Joint Torque ◽  
Human Model ◽  
Joint Torques ◽  
3 Dimensional ◽  
Flexion Extension ◽  
Fabric Materials

In this paper, 3-axial knee joint torques given by compression sports tights were performed by numerical simulations using 3-dimensional computer graphics of a human model. Running motions of the human model were represented as the 3-dimensional computer graphics, and the running motions were determined by the motion capturing system of human subjects. Strain distribution on the surface of the 3-dimentional computer graphics of the human model was applied to the boundary conditions of the numerical simulations. An anisotropic hyperelastic model considering stress softening of fabric materials was implemented to reproduce the mechanical characteristics of the compression sports tights. Based on the strain-time relationships, knee joint torques in 3-dimentional coordinates given by the compression sports tights were calculated. As a result, the three types of knee joint torque generated by the compression sports tights in running motions were calculated. From the calculated results, the maximum value of flexion/extension, varus/valgus, and internal/external knee joint torques were given as 2.52, 0.59, and 0.31 Nm, respectively. The effect of compression sports tights on the knee joint was investigated.

Women Ankle Joint Torques Comparison between Bare Foot and High Heel

2013 ◽  
Vol 378 ◽  
pp. 382-386
Author(s):  
Hai Bin Liu ◽  
Zhi Qiang He ◽  
Wen Xue Yuan ◽  
Zhao Li Meng
Keyword(s):  
Ankle Joint ◽  
Muscle Force ◽  
Inverse Dynamics ◽  
Frontal Plane ◽  
Joint Torque ◽  
Force System ◽  
Joint Torques ◽  
High Heel ◽  
Internal Phase ◽  
The Stability

Objective: Research on ankle joint torques of healthy women with high heel compared with bare foot based on Inverse Dynamics. Methods: 12 women were recruited and tested by motion and force system. Kinematical, kinetic and personal segment parameter data were used to compute ankle joint torques and compare the differences between bare foot and high heel.Conclusion: compared with bare foot, It can infer that Soleus and Gastrocnemius access the contraction in advance and keep higher muscle force. Tibia Anterior and Posterior must have to make powerful contraction that could keep the ankle joint with higher torque. Compared with sagital and frontal plane, high heel doesnt change the joint torque in horizontal plane during the whole internal phase, but the fluctuations of torque value may influence the stability during normal level walking.

A NEW STABILITY CRITERION FOR HUMAN SEATED TASKS WITH GIVEN POSTURES

2012 ◽  
Vol 09 (03) ◽  
pp. 1250015 ◽  
Author(s):  
BRADLEY HOWARD ◽  
JINGZHOU YANG
Keyword(s):  
Stability Analysis ◽  
Stability Criterion ◽  
Center Of Mass ◽  
Reaction Force ◽  
Joint Torque ◽  
Human Model ◽  
Digital Human Model ◽  
Applied Forces ◽  
The Stability ◽  
Digital Human

In digital human modeling (DHM), the analysis of postural stability has five main goals: to determine if a posture is stable or unstable through an explicit criterion; to quantify the level of stability or provide a margin of stability that accounts for the height of the center of mass (COM) above the support plane(s); to be valid in the presence of externally applied forces and moments; be able to assess stability when multiple noncoplanar support planes exist, as is the case with seated postures; and to give insight into the support reaction force (SRF) distribution. To date, there is not a method for analyzing stability that can effectively meet each goal. This paper presents a new stability criterion and stability analysis that accomplishes each intended goal. The stability analysis is derived from the calculation of joint torque using the recursive Lagrangian dynamic formulation. A 56-degree-of-freedom (DOF) articulated digital human model is used to model seated postures to demonstrate the proposed stability criterion. Different given postures with different external load cases are presented.

Predictive Simulation of Human Ladder Climbing

2013 ◽  
Author(s):  
Hyun-Joon Chung ◽  
Yujiang Xiang ◽  
Mahdiar Hariri ◽  
Rajan Bhatt ◽  
Jasbir S. Arora ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Motion Tracking ◽  
Mechanical Energy ◽  
Joint Torque ◽  
Human Model ◽  
Joint Torques ◽  
Contact Points ◽  
Design Variables ◽  
Reaction Forces ◽  
Hands And Feet

An optimization formulation for human ladder climbing simulation is presented. The human model has 55 degrees of freedom — 49 revolute joints and 6 global translation & rotation joints. It is assumed that the ladder climbing motion is symmetric and periodic. The formulation starts with four contact points with both hands and feet. Then, hand and foot moves up and it ends with four contact points again. Design variables are the joint angle profiles and contact reaction forces. The objective function is combined with dynamic efforts and motion tracking. The dynamic efforts are joint torque square which is proportional to the mechanical energy. The motion tracking is the motion capture data tracking so that the motion follows the natural ladder climb motion as well. The dynamics results with joint torques and reaction forces are recovered and analyzed from the simulation.

Symmetric Multistep Methods Revisited: II. Numerical Experiments

1999 ◽  
Vol 173 ◽  
pp. 309-314 ◽  
Author(s):  
T. Fukushima
Keyword(s):  
Multistep Methods ◽  
Computational Time ◽  
Integration Time ◽  
Implicit Methods ◽  
Symmetric Methods ◽  
Celestial Bodies ◽  
The Stability ◽  
Predictor Corrector ◽  
Symmetric Multistep Methods ◽  
Integration Errors

AbstractBy using the stability condition and general formulas developed by Fukushima (1998 = Paper I) we discovered that, just as in the case of the explicit symmetric multistep methods (Quinlan and Tremaine, 1990), when integrating orbital motions of celestial bodies, the implicit symmetric multistep methods used in the predictor-corrector manner lead to integration errors in position which grow linearly with the integration time if the stepsizes adopted are sufficiently small and if the number of corrections is sufficiently large, say two or three. We confirmed also that the symmetric methods (explicit or implicit) would produce the stepsize-dependent instabilities/resonances, which was discovered by A. Toomre in 1991 and confirmed by G.D. Quinlan for some high order explicit methods. Although the implicit methods require twice or more computational time for the same stepsize than the explicit symmetric ones do, they seem to be preferable since they reduce these undesirable features significantly.

scholarly journals Upper-Limb Isometric Force Feasible Set: Evaluation of Joint Torque-Based Models

Biomechanics ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 102-117
Author(s):  
Nasser Rezzoug ◽  
Vincent Hernandez ◽  
Philippe Gorce
Keyword(s):  
Upper Limb ◽  
Isometric Force ◽  
Joint Torque ◽  
Force Distribution ◽  
Prediction Errors ◽  
Feasible Set ◽  
Joint Torques ◽  
Motor Abilities ◽  
Capacity Evaluation ◽  
Measured Force

A force capacity evaluation for a given posture may provide better understanding of human motor abilities for applications in sport sciences, rehabilitation and ergonomics. From data on posture and maximum isometric joint torques, the upper-limb force feasible set of the hand was predicted by four models called force ellipsoid, scaled force ellipsoid, force polytope and scaled force polytope, which were compared with a measured force polytope. The volume, shape and force prediction errors were assessed. The scaled ellipsoid underestimated the maximal mean force, and the scaled polytope overestimated it. The scaled force ellipsoid underestimated the volume of the measured force distribution, whereas that of the scaled polytope was not significantly different from the measured distribution but exhibited larger variability. All the models characterized well the elongated shape of the measured force distribution. The angles between the main axes of the modelled ellipsoids and polytopes and that of the measured polytope were compared. The values ranged from 7.3° to 14.3°. Over the entire surface of the force ellipsoid, 39.7% of the points had prediction errors less than 50 N; 33.6% had errors between 50 and 100 N; and 26.8% had errors greater than 100N. For the force polytope, the percentages were 56.2%, 28.3% and 15.4%, respectively.

scholarly journals Terrain classification and adaptive locomotion for a hexapod robot Qingzhui

2021 ◽  
Author(s):  
Yue Zhao ◽  
Feng Gao ◽  
Qiao Sun ◽  
Yunpeng Yin
Keyword(s):  
Legged Robots ◽  
Measurement Unit ◽  
Support Vector ◽  
Hexapod Robot ◽  
Terrain Classification ◽  
Adaptive Locomotion ◽  
Joint Torques ◽  
Active Compliance ◽  
Outdoor Environments ◽  
The Stability

AbstractLegged robots have potential advantages in mobility compared with wheeled robots in outdoor environments. The knowledge of various ground properties and adaptive locomotion based on different surface materials plays an important role in improving the stability of legged robots. A terrain classification and adaptive locomotion method for a hexapod robot named Qingzhui is proposed in this paper. First, a force-based terrain classification method is suggested. Ground contact force is calculated by collecting joint torques and inertial measurement unit information. Ground substrates are classified with the feature vector extracted from the collected data using the support vector machine algorithm. Then, an adaptive locomotion on different ground properties is proposed. The dynamic alternating tripod trotting gait is developed to control the robot, and the parameters of active compliance control change with the terrain. Finally, the method is integrated on a hexapod robot and tested by real experiments. Our method is shown effective for the hexapod robot to walk on concrete, wood, grass, and foam. The strategies and experimental results can be a valuable reference for other legged robots applied in outdoor environments.

Sign in / Sign up

Export Citation Format

Share Document