Cell Crawling Assisted by Contractile Stress Induced Retraction

2010 ◽  
Vol 132 (6) ◽  
Author(s):  
Sitikantha Roy ◽  
Feng Miao ◽  
H. Jerry Qi
Keyword(s):  
Cell Movement ◽  
Focal Adhesions ◽  
Receptor Ligand ◽  
Produce Cell ◽  
Cell Locomotion ◽  
Cell Crawling ◽  
Parametric Studies ◽  
Contractile Stress ◽  
A Cell ◽  
Locomotion Speed

Cell locomotion is a result of a series of synchronized chemo-mechanical processes. Crawling-type cell locomotion consists of three steps: protrusion, translocation, and retraction. Previous works have shown that both protrusion and retraction can produce cell movement. For the latter, a cell derives its propulsive force from retraction induced protrusion mechanism, which was experimentally verified by Chen (1979, “Induction of Spreading During Fibroblast Movement,” J. Cell Biol., 81, pp. 684–691). In this paper, using finite element method, we take a computational biomimetic approach to study cell crawling assisted by contractile stress induced de-adhesion at the rear of the focal adhesion zone (FAZ). We assume the formation of the FAZ is driven by receptor-ligand bonds and nonspecific interactions. The contractile stress is generated due to the molecular activation of the intracellular actin-myosin machinery. The exerted contractile stress and its time dependency are modeled in a phenomenological manner as a two-spring mechanosensor proposed by Schwarz (2006, “Focal Adhesions as Mechanosensors: The Two-Spring Model,” BioSystems, 83(2–3), pp. 225–232). Through coupling the kinetics of receptor-ligand bonds with contractile stress, de-adhesion can be achieved when the stall value of the contractile stress is larger than a critical one. De-adhesion at the rear end of the FAZ causes a redistribution of elastic energy and induces cell locomotion. Parametric studies were conducted to investigate the connection between the cell locomotion speed and stall stress, and receptor-ligand kinetics. Finally, we provide a scaling relationship that can be used to estimate the cell locomotion speed.

Cell movements in a confluent monolayer are not caused by gaps: evidence for direct contact inhibition of overlapping

1978 ◽  
Vol 30 (1) ◽  
pp. 293-304
Author(s):  
L. Timpe ◽  
E. Martz ◽  
M.S. Steinberg
Keyword(s):  
Direct Contact ◽  
Cell Monolayer ◽  
Cell Movement ◽  
Contact Inhibition ◽  
3T3 Cells ◽  
Confluent Monolayer ◽  
Cell Movements ◽  
Cell Locomotion ◽  
Confluent Cell ◽  
A Cell

According to the hypothesis of contact inhibition of movement, cells in a confluent monolayer are restrained from major overlapping by a directional inhibition of locomotion. This explanation of monolayering proposes that contact between 2 cells locally paralyses the locomotory function, preventing movement in the direction that would lead to overlapping. Consequently, a cell in contact on all sides with neighbouring cells should be immobilized. Yet in strictly monolayered cultures of confluent chick liver or mouse 3T3 cells, we have previously observed both translational cell movements and re-shufflings of relative cell positions. The ‘confluence’ was not perfect, however, and it seemed possible that the movements observed were due to release from contact inhibition by occasional transitory gaps seen to open up between cells. In the present study, detailed gap experiences and cell movements were recorded for 31 cells over a total of 1637 cell-hours. There was no significant correlation between frequency of gaps experienced and the extent of cell movement measured as neighbour-exchanges. We conclude that gaps are not a major cause of the movements observed. The hypothesis based on contact inhibition of motion, which attempts to explain monolayering indirectly by imposing a restraint on cell locomotion, cannot explain the substantial cell movements seen in the confluent cell monolayer studied here. To explain contact inhibition of overlapping, the evidence favours a more direct hypothesis which places no restriction on cell movement other than that overlapping be avoided. Such direct avoidance of overlapping could result from differences in the strengths with which cells adhere to one another and to the substratum.

scholarly journals Growth factor dependent changes in nanoscale architecture of focal adhesions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Karin Legerstee ◽  
Tsion E. Abraham ◽  
Wiggert A. van Cappellen ◽  
Alex L. Nigg ◽  
Johan A. Slotman ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Intermediate Layer ◽  
Cell Movement ◽  
Focal Adhesions ◽  
Bottom Layer ◽  
Vertical Axis ◽  
Longitudinal Distribution ◽  
Structured Illumination ◽  
Structured Illumination Microscopy ◽  
Mediate Cell

AbstractFocal adhesions (FAs) are flat elongated structures that mediate cell migration and link the cytoskeleton to the extracellular matrix. Along the vertical axis FAs were shown to be composed of three layers. We used structured illumination microscopy to examine the longitudinal distribution of four hallmark FA proteins, which we also used as markers for these layers. At the FA ends pointing towards the adherent membrane edge (heads), bottom layer protein paxillin protruded, while at the opposite ends (tails) intermediate layer protein vinculin and top layer proteins zyxin and VASP extended further. At the tail tips, only intermediate layer protein vinculin protruded. Importantly, head and tail compositions were altered during HGF-induced scattering with paxillin heads being shorter and zyxin tails longer. Additionally, FAs at protruding or retracting membrane edges had longer paxillin heads than FAs at static edges. These data suggest that redistribution of FA-proteins with respect to each other along FAs is involved in cell movement.

Syndesmos, a protein that interacts with the cytoplasmic domain of syndecan-4, mediates cell spreading and actin cytoskeletal organization

2000 ◽  
Vol 113 (2) ◽  
pp. 315-324 ◽  
Author(s):  
P.C. Baciu ◽  
S. Saoncella ◽  
S.H. Lee ◽  
F. Denhez ◽  
D. Leuthardt ◽  
...  
Keyword(s):  
Plasma Membranes ◽  
Focal Adhesions ◽  
Cell Spreading ◽  
Cytoplasmic Domain ◽  
Cellular Protein ◽  
Actin Stress Fiber ◽  
Independent Manner ◽  
Intracellular Proteins ◽  
Central Regions ◽  
A Cell

Syndecan-4 is a cell surface heparan sulfate proteoglycan which, in cooperation with integrins, transduces signals for the assembly of focal adhesions and actin stress fibers in cells plated on fibronectin. The regulation of these cellular events is proposed to occur, in part, through the interaction of the cytoplasmic domains of these transmembrane receptors with intracellular proteins. To identify potential intracellular proteins that interact with the cytoplasmic domain of syndecan-4, we carried out a yeast two-hybrid screen in which the cytoplasmic domain of syndecan-4 was used as bait. As a result of this screen, we have identified a novel cellular protein that interacts with the cytoplasmic domain of syndecan-4 but not with those of the other three syndecan family members. The interaction involves both the membrane proximal and variable central regions of the cytoplasmic domain. We have named this cDNA and encoded protein syndesmos. Syndesmos is ubiquitously expressed and can be myristylated. Consistent with its myristylation and syndecan-4 association, syndesmos colocalizes with syndecan-4 in the ventral plasma membranes of cells plated on fibronectin. When overexpressed in NIH 3T3 cells, syndesmos enhances cell spreading, actin stress fiber and focal contact formation in a serum-independent manner.

scholarly journals In silico stress fibre content affects peak strain in cytoplasm and nucleus but not in membrane for uniaxial substrate stretch

2019 ◽  
Author(s):  
Tamer Abdalrahman ◽  
Neil H. Davies ◽  
Thomas Franz
Keyword(s):  
Elastic Modulus ◽  
In Silico ◽  
Focal Adhesions ◽  
Element Model ◽  
Homogenization Method ◽  
Fibre Volume ◽  
Fibre Content ◽  
Peak Strain ◽  
Stress Fibre ◽  
A Cell

AbstractExisting in silico models for single cell mechanics feature limited representations of cytoskeletal structures that contribute substantially to the mechanics of a cell. We propose a micromechanical hierarchical approach to capture the mechanical contribution of actin stress fibres. For a cell-specific fibroblast geometry with membrane, cytoplasm and nucleus, the Mori-Tanaka homogenization method was employed to describe cytoplasmic inhomogeneities and constitutive contribution of actin stress fibres. The homogenization was implemented in a finite element model of the fibroblast attached to a substrate through focal adhesions. Strain in cell membrane, cytoplasm and nucleus due to uniaxial substrate stretch was assessed for different stress fibre volume fractions and different elastic modulus of the substrate. A considerable decrease of the peak strain with increasing stress fibre content was observed in cytoplasm and nucleus but not the membrane, whereas the peak strain in cytoplasm, nucleus and membrane increased for increasing elastic modulus of the substrate.

scholarly journals 3D Bioprinted GelMA Based Models for the Study of Trophoblast Cell Invasion

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Houzhu Ding ◽  
Nicholas P. Illsley ◽  
Robert C. Chang
Keyword(s):  
Cell Invasion ◽  
Functional Limitations ◽  
Cell Movement ◽  
Trophoblast Cell ◽  
Trophoblast Invasion ◽  
Ring Model ◽  
Cell Front ◽  
A Cell ◽  
Practical Tool ◽  
And Migration

AbstractBioprinting is an emerging and promising technique for fabricating 3D cell-laden constructs for various biomedical applications. In this paper, we employed 3D bioprinted GelMA-based models to investigate the trophoblast cell invasion phenomenon, enabling studies of key placental functions. Initially, a set of optimized material and process parameters including GelMA concentration, UV crosslinking time and printing configuration were identified by systematic, parametric study. Following this, a multiple-ring model (2D multi-ring model) was tested with the HTR-8/SVneo trophoblast cell line to measure cell movement under the influence of EGF (chemoattractant) gradients. In the multi-ring model, the cell front used as a cell invasion indicator moves at a rate of 85 ± 33 µm/day with an EGF gradient of 16 µM. However, the rate was dramatically reduced to 13 ± 5 µm/day, when the multi-ring model was covered with a GelMA layer to constrain cells within the 3D environment (3D multi-ring model). Due to the geometric and the functional limitations of multi-ring model, a multi-strip model (2D multi-strip model) was developed to investigate cell movement in the presence and absence of the EGF chemoattractant. The results show that in the absence of an overlying cell-free layer of GelMA, movement of the cell front shows no significant differences between control and EGF-stimulated rates, due to the combination of migration and proliferation at high cell density (6 × 106 cells/ml) near the GelMA surface. When the model was covered by a layer of GelMA (3D multi-strip model) and migration was excluded, EGF-stimulated cells showed an invasion rate of 21 ± 3 µm/day compared to the rate for unstimulated cells, of 5 ± 4 µm/day. The novel features described in this report advance the use of the 3D bioprinted placental model as a practical tool for not only measurement of trophoblast invasion but also the interaction of invading cells with other tissue elements.

scholarly journals Cardiac fibroblasts require focal adhesion kinase for normal proliferation and migration

2009 ◽  
Vol 296 (3) ◽  
pp. H627-H638 ◽  
Author(s):  
Ana Maria Manso ◽  
Seok-Min Kang ◽  
Sergey V. Plotnikov ◽  
Ingo Thievessen ◽  
Jaewon Oh ◽  
...  
Keyword(s):  
Focal Adhesion Kinase ◽  
Focal Adhesion ◽  
Adult Mouse ◽  
Cardiac Fibroblasts ◽  
Focal Adhesions ◽  
Protein Levels ◽  
Tyrosine Kinase 2 ◽  
A Cell ◽  
And Migration ◽  
Proliferation And Migration

Migration and proliferation of cardiac fibroblasts (CFs) play an important role in the myocardial remodeling process. While many factors have been identified that regulate CF growth and migration, less is known about the signaling mechanisms involved in these processes. Here, we utilized Cre-LoxP technology to obtain focal adhesion kinase (FAK)-deficient adult mouse CFs and studied how FAK functioned in modulating cell adhesion, proliferation, and migration of these cells. Treatment of FAKflox/flox CFs with Ad/Cre virus caused over 70% reduction of FAK protein levels within a cell population. FAK-deficient CFs showed no changes in focal adhesions, cell morphology, or protein expression levels of vinculin, talin, or paxillin; proline-rich tyrosine kinase 2 (Pyk2) expression and activity were increased. Knockdown of FAK protein in CFs increased PDGF-BB-induced proliferation, while it reduced PDGF-BB-induced migration. Adhesion to fibronectin was not altered. To distinguish between the function of FAK and Pyk2, FAK function was inhibited via adenoviral-mediated overexpression of the natural FAK inhibitor FAK-related nonkinase (FRNK). Ad/FRNK had no effect on Pyk2 expression, inhibited the PDGF-BB-induced migration, but did not change the PDGF-BB-induced proliferation. FAK deficiency had only modest effects on increasing PDGF-BB activation of p38 and JNK MAPKs, with no alteration in the ERK response vs. control cells. These results demonstrate that FAK is required for the PDGF-BB-induced migratory response of adult mouse CFs and suggest that FAK could play an essential role in the wound-healing response that occurs in numerous cardiac pathologies.

A Study of Mechanosensing of an Osteoblast at Focal Adhesions Under Cyclic Strain Using Magnetic Micropillars

2019 ◽  
Author(s):  
Toshihiko Shiraishi ◽  
Kota Nagai
Keyword(s):  
Calcium Ion ◽  
Mechanical Vibration ◽  
Focal Adhesions ◽  
Cyclic Strain ◽  
Mechanical Stimuli ◽  
Osteoblast Cells ◽  
Intracellular Calcium Ion ◽  
A Cell ◽  
Sense And Respond ◽  
Biochemical Signals

Abstract It has been reported that cells sense and respond to mechanical stimuli. Mechanical vibration promotes the cell proliferation and the cell differentiation of osteoblast cells at 12.5 Hz and 50 Hz, respectively. It indicates that osteoblast cells have a mechansensing system for mechanical vibration. There may be some mechanosensors and we focus on cellular focal adhesions through which mechanical and biochemical signals may be transmitted from extracellular matrices into a cell. However, it is very difficult to directly apply mechanical stimuli to focal adhesions. We developed a magnetic micropillar substrate on which micron-sized pillars are deflected according to applied magnetic field strength and focal adhesions adhering to the top surface of the pillars are given mechanical stimuli. In this paper, we focus on intracellular calcium ion as a second messenger of cellular mechanosensing and investigate the mechanosensing mechanism of an osteoblast cell at focal adhesions under cyclic strain using a magnetic micropillar substrate. The experimental results indicate that the magnetic micropillars have enough performance to response to an electric current applied to a coil in an electromagnet and to apply the cyclic strain of less than 3% to a cell. In the cyclic strain of less than 3%, the calcium response of a cell was not observed.

Characterization of a novel iodinated sigma-2 receptor ligand as a cell proliferation marker

2006 ◽  
Vol 33 (2) ◽  
pp. 203-209 ◽  
Author(s):  
Catherine Hou ◽  
Zhude Tu ◽  
Robert Mach ◽  
Hank F. Kung ◽  
Mei-Ping Kung
Keyword(s):  
Cell Proliferation ◽  
Proliferation Marker ◽  
Receptor Ligand ◽  
A Cell ◽  
Cell Proliferation Marker

scholarly journals Tropomyosin Isoform Expression Regulates the Transition of Adhesions To Determine Cell Speed and Direction

2009 ◽  
Vol 29 (6) ◽  
pp. 1506-1514 ◽  
Author(s):  
Cuc T. T. Bach ◽  
Sarah Creed ◽  
Jessie Zhong ◽  
Maha Mahmassani ◽  
Galina Schevzov ◽  
...  
Keyword(s):  
Focal Adhesion ◽  
Actin Filaments ◽  
Feedback Loop ◽  
Cell Movement ◽  
Focal Adhesions ◽  
Leading Edge ◽  
Mesenchymal Cell ◽  
Critical Determinant ◽  
Focal Complex

ABSTRACT The balance of transition between distinct adhesion types contributes to the regulation of mesenchymal cell migration, and the characteristic association of adhesions with actin filaments led us to question the role of actin filament-associating proteins in the transition between adhesive states. Tropomyosin isoform association with actin filaments imparts distinct filament structures, and we have thus investigated the role for tropomyosins in determining the formation of distinct adhesion structures. Using combinations of overexpression, knockdown, and knockout approaches, we establish that Tm5NM1 preferentially stabilizes focal adhesions and drives the transition to fibrillar adhesions via stabilization of actin filaments. Moreover, our data suggest that the expression of Tm5NM1 is a critical determinant of paxillin phosphorylation, a signaling event that is necessary for focal adhesion disassembly. Thus, we propose that Tm5NM1 can regulate the feedback loop between focal adhesion disassembly and focal complex formation at the leading edge that is required for productive and directed cell movement.

Sign in / Sign up

Export Citation Format

Share Document