Multi-Objective Optimization for the Force System of Orthodontic Retraction Spring Using Genetic Algorithms

2009 ◽  
Vol 3 (4) ◽  
Author(s):  
Bahaa I. Kazem
Keyword(s):  
Design Parameters ◽  
Element Formulation ◽  
Geometrical Shape ◽  
Multi Objective Optimization ◽  
Current Application ◽  
Force System ◽  
Multi Objective ◽  
Proposed Model ◽  
Analytical Formulas ◽  
Section Type

In this study, Castigliano’s second theorem is applied to predict the force and moment system produced by orthodontics T-spring. The developed analytical formulas include all spring design parameters (material, geometrical shape and wire cross section, type and position of spring end mounting system, and direction and magnitude of the activation forces). The analytical results are compared with those obtained by nonlinear finite element formulation with nonlinear capabilities as a large deflection and showed an acceptable agreement for the current application. The reliability of the proposed model is successfully tested to predict the effect of some design parameters on spring stiffness. The developed analytic force system formulas are used as an objective function for solving a multi-objective optimization problem to produce the required force and moment at spring ends. A new genetic algorithm scheme is developed to obtain optimal spring design parameters according to design objectives and constraints. The results show that depending on the above methodology we can make a good estimation of the required design parameters of the T-spring for a specific application.

Multi-objective optimization of squirrel cage fan for range hood based on Kriging model

2021 ◽  
pp. 095440622199586
Author(s):  
Qianhao Xiao ◽  
Jun Wang ◽  
Boyan Jiang ◽  
Weigang Yang ◽  
Xiaopei Yang
Keyword(s):  
Flow Rate ◽  
Optimization Design ◽  
Volume Flow Rate ◽  
Kriging Model ◽  
Volume Flow ◽  
Design Parameters ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Squirrel Cage

In view of the multi-objective optimization design of the squirrel cage fan for the range hood, a blade parameterization method based on the quadratic non-uniform B-spline (NUBS) determined by four control points was proposed to control the outlet angle, chord length and maximum camber of the blade. Morris-Mitchell criteria were used to obtain the optimal Latin hypercube sample based on the evolutionary operation, and different subsets of sample numbers were created to study the influence of sample numbers on the multi-objective optimization results. The Kriging model, which can accurately reflect the response relationship between design variables and optimization objectives, was established. The second-generation Non-dominated Sorting Genetic algorithm (NSGA-II) was used to optimize the volume flow rate at the best efficiency point (BEP) and the maximum volume flow rate point (MVP). The results show that the design parameters corresponding to the optimization results under different sample numbers are not the same, and the fluctuation range of the optimal design parameters is related to the influence of the design parameters on the optimization objectives. Compared with the prototype, the optimized impeller increases the radial velocity of the impeller outlet, reduces the flow loss in the volute, and increases the diffusion capacity, which improves the volume flow rate, and efficiency of the range hood system under multiple working conditions.

A multi-objective optimization model for logistic planning in the crisis response phase

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohammad Mahdi Ershadi ◽  
Hossein Shams Shemirani
Keyword(s):  
Objective Function ◽  
Optimization Model ◽  
Crisis Response ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Multi Objective ◽  
Proposed Model ◽  
Different Types ◽  
Response Phase ◽  
Logistic Planning

PurposeProper planning for the response phase of humanitarian relief can significantly prevent many financial and human losses. To this aim, a multi-objective optimization model is proposed in this paper that considers different types of injured people, different vehicles with determining capacities and multi-period logistic planning. This model can be updated based on new information about resources and newly identified injured people.Design/methodology/approachThe main objective function of the proposed model in this paper is minimizing the unsatisfied prioritized injured people in the network. Besides, the total transportation activities of different types of vehicles are considered as another objective function. Therefore, these objectives are optimized hierarchically in the proposed model using the Lexicographic method. This method finds the best value for the first objective function. Then, it tries to optimize transportation activities as the second objective function while maintaining the optimality of the first objective function.FindingsThe performances of the proposed model were analyzed in different cases and its robust approach for different problems was shown within the framework of a case study. Besides, the sensitivity analysis of results shows the logical behavior of the proposed model against various factors.Practical implicationsThe proposed methodology can be applied to find the best response plan for all crises.Originality/valueIn this paper, we have tried to use a multi-objective optimization model to guide and correct response programs to deal with the occurred crisis. This is important because it can help emergency managers to improve their plans.

Multi-objective optimization of hydro-viscous flexible drive for dynamic characteristics using genetic algorithm

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Jianzhong Cui ◽  
Hu Li ◽  
Dong Zhang ◽  
Yawen Xu ◽  
Fangwei Xie
Keyword(s):  
Genetic Algorithm ◽  
Dynamic Characteristics ◽  
Transmission Efficiency ◽  
Outer Radius ◽  
Transmission Model ◽  
Design Parameters ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Multi Objective ◽  
Dynamic Transmission Model

Purpose The purpose of this study is to investigate the flexible dynamic characteristics about hydro-viscous drive providing meaningful insights into the credible speed-regulating behavior during the soft-start. Design/methodology/approach A comprehensive dynamic transmission model is proposed to investigate the effects of key parameters on the dynamic characteristics. To achieve a trade-off between the transmission efficiency and time proportion of hydrodynamic and mixed lubrication, a multi-objective optimization of friction pair system by genetic algorithm is presented to obtain the optimal combination of design parameters. Findings Decreasing the engagement pressure or the ratio of inner and outer radius, increasing the lubricating oil viscosity or the outer radius will result in the increase of time proportion of hydrodynamic and mixed lubrication, as well as the transmission efficiency and its maximum value. After optimization, main dynamic parameters including the oil film thickness, angular velocity of the driven disk, viscous torque and total torque show remarkable flexible transmission characteristics. Originality/value Both the dynamic transmission model and multi-objective optimization model are established to analyze the effects of main design parameters on the dynamic characteristics of hydro-viscous flexible drive.

A Thompson Sampling Efficient Multi-Objective Optimization Algorithm (TSEMO) for Lithium-Ion Battery Liquid-Cooled Thermal Management System: Study of Hydrodynamic, Thermodynamic, and Structural Performance

2020 ◽  
Vol 18 (2) ◽  
Author(s):  
A. Garg ◽  
Cheng Liu ◽  
A. K. Jishnu ◽  
Liang Gao ◽  
My Loan Le Phung ◽  
...  
Keyword(s):  
Thermal Management ◽  
Optimization Algorithm ◽  
Cooling System ◽  
Hydrodynamic Performance ◽  
Design Parameters ◽  
Inlet Temperature ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Thompson Sampling ◽  
Conflicting Objectives

Abstract The efficient design of battery thermal management systems (BTMSs) plays an important role in enhancing the performance, life, and safety of electric vehicles (EVs). This paper aims at designing and optimizing cold plate-based liquid cooling BTMS. Pitch sizes of channels, inlet velocity, and inlet temperature of the outermost channel are considered as design parameters. Evaluating the influence and optimization of design parameters by repeated computational fluid dynamics calculations is time consuming. To tackle this, the effect of design parameters is studied by using surrogate modeling. Optimized design variables should ensure a perfect balance between certain conflicting goals, namely, cooling efficiency, BTMS power consumption (parasitic power), and size of the battery. Therefore, the optimization problem is decoupled into hydrodynamic performance, thermodynamic performance, and mechanical structure performance. The optimal design involving multiple conflicting objectives in BTMS is solved by adopting the Thompson sampling efficient multi-objective optimization algorithm. The results obtained are as follows. The optimized average battery temperature after optimization decreased from 319.86 K to 319.2759 K by 0.18%. The standard deviation of battery temperature decreased from 5.3347 K to 5.2618 K by 1.37%. The system pressure drop decreased from 7.3211 Pa to 3.3838 Pa by 53.78%. The performance of the optimized battery cooling system has been significantly improved.

scholarly journals Multi-Objective Optimization Model for P + R and K + R Facilities’ Collaborative Layout Decision

2020 ◽  
Vol 12 (21) ◽  
pp. 8833
Author(s):  
Wei Wang ◽  
Zhentian Sun ◽  
Zhiyuan Wang ◽  
Yue Liu ◽  
Jun Chen
Keyword(s):  
Optimization Model ◽  
Road Traffic ◽  
Supply And Demand ◽  
Optimal Decision ◽  
Multi Objective Optimization ◽  
Service Capacity ◽  
Location Selection ◽  
Multi Objective ◽  
Proposed Model ◽  
Collaborative Decision

In order to reduce the pressure on urban road traffic, multi-modal travel is gradually replacing single-modal travel. Park and ride (P + R) and kiss and ride (K + R) are effective methods to integrate car transportation and rail transit. However, there is often an imbalance between supply and demand in existing car occupant transfer facilities, which include both P + R and K + R facilities. Therefore, we aim to conduct a research on P + R and K + R facilities’ collaborative decision. It first classifies car occupant transfer facilities into types and levels and sets the service capacity of each category. On the premise of ensuring the occupancy of parking spaces, our model aims to maximize the intercepted vehicle mileage and transfer utility and establishes an optimal decision model for car occupant transfer facilities. The model collaboratively decides the facilities in terms of location selection, layout arrangement, and overflow demand conversion to balance the supply and demand. We choose Chengdu as an example, apply the multi-objective optimization model of car occupant transfer facilities, give improved schemes, and further explore the influence of the quantity of facilities on the optimization objectives. The results show that the scheme obtained by the proposed model is significantly better than the existing scheme.

scholarly journals Multi-Objective Design Optimization of the Leg Mechanism for a Piping Inspection Robot

2014 ◽  
Author(s):  
Renaud Henry ◽  
Damien Chablat ◽  
Mathieu Porez ◽  
Frédéric Boyer ◽  
Daniel Kanaan
Keyword(s):  
Nuclear Power ◽  
Pareto Front ◽  
Design Parameters ◽  
Objective Functions ◽  
Multi Objective Optimization ◽  
Dimensional Synthesis ◽  
Force Factor ◽  
Multi Objective ◽  
Inspection Robot ◽  
Contact Points

This paper addresses the dimensional synthesis of an adaptive mechanism of contact points ie a leg mechanism of a piping inspection robot operating in an irradiated area as a nuclear power plant. This studied mechanism is the leading part of the robot sub-system responsible of the locomotion. Firstly, three architectures are chosen from the literature and their properties are described. Then, a method using a multi-objective optimization is proposed to determine the best architecture and the optimal geometric parameters of a leg taking into account environmental and design constraints. In this context, the objective functions are the minimization of the mechanism size and the maximization of the transmission force factor. Representations of the Pareto front versus the objective functions and the design parameters are given. Finally, the CAD model of several solutions located on the Pareto front are presented and discussed.

A Parametric Optimization Approach of an Induction Heating System for Energy Consumption Reduction

2017 ◽  
Author(s):  
Paolo Cicconi ◽  
Anna Costanza Russo ◽  
Mariorosario Prist ◽  
Francesco Ferracuti ◽  
Michele Germani ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Induction Heating ◽  
Heating System ◽  
High Energy ◽  
Design Parameters ◽  
Optimization Approach ◽  
Multi Objective Optimization ◽  
Molding Process ◽  
Multi Objective ◽  
Induction Heating System

Nowadays, electromagnetic high-frequency induction is very used for different non-contact heating applications such as the molding process. Every molding process requires the preheating and the thermal maintenance of the molds, to enhance the filling phase and the quality of the final products. In this context, an induction heating system, mostly, is a customized equipment. The design and definition of an induction equipment depends on the target application. This technology is highly efficient and performant, however it provides a high-energy consumption. Therefore, optimization strategies are very suitable to reduce energy cost and consumption. The proposed paper aims to define a method to optimize the induction heating of a mold in terms of time, consumption, and achieved temperature. The proposed optimization method involves genetic algorithms to define the design parameters related to geometry and controller. A test case describes the design of an induction heating system for a polyurethane molding process, which is the soles foaming. This case study deals with the multi-objective optimization of parameters such as the geometrical dimensions, the inductor sizing, and the controller setting. The multi-objective optimization aims to reduce the energy consumption and to increase the wall temperature of the mold.

Multi-Objective Optimization of Axial Crush Performance of Square Metal–Composite Hybrid Tubes

2013 ◽  
Author(s):  
Roozbeh Kalhor ◽  
Hossein Akbarshahi ◽  
Scott W. Case
Keyword(s):  
Impact Load ◽  
Pareto Frontier ◽  
Back Propagation ◽  
Design Parameters ◽  
Metal Composite ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Axial Crush ◽  
Composite Layers ◽  
Test Sets

This article deals with the multi objective optimization of square hybrid tubes (metal-composite) under axial impact load. Maximum crushing load and absorbed energy are objective functions and fiber orientation angles of the composite layers are chosen as design parameters while the maximum crush load is limited. Back-propagation artificial neural networks (ANNs) are utilized to construct the mapping between the variables and the objectives. Non-dominated sorting Genetic algorithm–II (NSGAII) is applied to obtain the optimal solutions and the finite element commercial software LS-DYNA is used to generate the training and test sets for the ANNs. Optimum results are presented as a Pareto frontier.

A Genetic Algorithm Based Multi-Objective Optimization of Squealer Tip Geometry in Axial Flow Turbines: A Constant Tip Gap Approach

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
H. Maral ◽  
C. B. Şenel ◽  
K. Deveci ◽  
E. Alpman ◽  
L. Kavurmacıoğlu ◽  
...  
Keyword(s):  
Genetic Algorithm ◽  
Tip Clearance ◽  
Design Parameters ◽  
Leakage Flow ◽  
Optimization Approach ◽  
Multi Objective Optimization ◽  
Tip Leakage Flow ◽  
Tip Leakage ◽  
Multi Objective ◽  
Blade Tip

Abstract Tip clearance is a crucial aspect of turbomachines in terms of aerodynamic and thermal performance. A gap between the blade tip surface and the stationary casing must be maintained to allow the relative motion of the blade. The leakage flow through the tip gap measurably reduces turbine performance and causes high thermal loads near the blade tip region. Several studies focused on the tip leakage flow to clarify the flow-physics in the past. The “squealer” design is one of the most common designs to reduce the adverse effects of tip leakage flow. In this paper, a genetic-algorithm-based optimization approach was applied to the conventional squealer tip design to enhance aerothermal performance. A multi-objective optimization method integrated with a meta-model was utilized to determine the optimum squealer geometry. Squealer height and width represent the design parameters which are aimed to be optimized. The objective functions for the genetic-algorithm-based optimization are the total pressure loss coefficient and Nusselt number calculated over the blade tip surface. The initial database is then enlarged iteratively using a coarse-to-fine approach to improve the prediction capability of the meta-models used. The procedure ends once the prediction errors are smaller than a prescribed level. This study indicates that squealer height and width have complex effects on the aerothermal performance, and optimization study allows to determine the optimum squealer dimensions.

Sign in / Sign up

Export Citation Format

Share Document