The Quadrant Edge Orifice—A Fluid Meter for Low Reynolds Numbers

1960 ◽  
Vol 82 (3) ◽  
pp. 729-733 ◽  
Author(s):  
M. Bogema ◽  
P. L. Monkmeyer
Keyword(s):  
Reynolds Number ◽  
Discharge Coefficient ◽  
Reynolds Numbers ◽  
Diameter Ratio ◽  
Roughness Effects ◽  
Low Reynolds Numbers ◽  
Low Reynolds Number Flow ◽  
Reynolds Number Flow ◽  
Number Flow ◽  
Low Reynolds

Tests have been conducted to determine the usefulness of the quadrant edge orifice as a fluid-metering device for low Reynolds number flow. As a result of numerous laboratory tests to determine the behavior of the discharge coefficient with changing Reynolds number, the following are discussed: The range of constant discharge coefficient, reproducibility of orifice plates, diameter ratio effects, upstream roughness effects, reinstallation effects, and effects of pressure tap location.

Low Reynolds number flow around and heat transfer from a heated circular cylinder

2010 ◽  
Vol 1 (1-2) ◽  
pp. 15-20 ◽  
Author(s):  
B. Bolló
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Lift Coefficient ◽  
Reynolds Numbers ◽  
Low Reynolds Numbers ◽  
Reynolds Number Flow ◽  
Two Dimensional Flow ◽  
Number Flow ◽  
Low Reynolds ◽  
Increasing Temperature

Abstract The two-dimensional flow around a stationary heated circular cylinder at low Reynolds numbers of 50 < Re < 210 is investigated numerically using the FLUENT commercial software package. The dimensionless vortex shedding frequency (St) reduces with increasing temperature at a given Reynolds number. The effective temperature concept was used and St-Re data were successfully transformed to the St-Reeff curve. Comparisons include root-mean-square values of the lift coefficient and Nusselt number. The results agree well with available data in the literature.

Modelling the Conical-Entrance Orifice Plate Flow Sensor

1995 ◽  
Vol 17 (3) ◽  
pp. 155-160
Author(s):  
Y. S. Ho ◽  
F. Abdullah
Keyword(s):  
Reynolds Number ◽  
Discharge Coefficient ◽  
Low Reynolds Number ◽  
Reynolds Numbers ◽  
Flow Sensor ◽  
Orifice Plate ◽  
Measuring Device ◽  
Reynolds Number Flow ◽  
Number Flow ◽  
Low Reynolds

This paper presents a numerical model for the conical entrance orifice plate flow sensor, which is essentially used as a low Reynolds number flow measuring device. The model was developed using a low Reynolds number k-ɛ model of turbulence – the Lam and Bremhorst model. Numerical results were obtained for diameter ratios of 0.1, 0.2 and 0.3, and for pipe Reynolds numbers of between 80 and 60000. The computed discharge coefficients are compared with available experimental data and with the value stated in BS 1042. Results show that the model developed can predict the discharge coefficient to within ±3% for the range of diameter ratios and Reynolds numbers investigated.

Low Reynolds number flow past a transverse cylinder at Mach two.

AIAA Journal ◽  
1972 ◽  
Vol 10 (10) ◽  
pp. 1381-1382
Author(s):  
CLARENCE W. KITCHENS ◽  
CLARENCE C. BUSH
Keyword(s):  
Reynolds Number ◽  
Low Reynolds Number ◽  
Low Reynolds Number Flow ◽  
Reynolds Number Flow ◽  
Flow Past ◽  
Number Flow ◽  
Low Reynolds

Numerical investigations on dynamic stall of low Reynolds number flow around oscillating airfoils

2010 ◽  
Vol 39 (9) ◽  
pp. 1529-1541 ◽  
Author(s):  
Shengyi Wang ◽  
Derek B. Ingham ◽  
Lin Ma ◽  
Mohamed Pourkashanian ◽  
Zhi Tao
Keyword(s):  
Reynolds Number ◽  
Low Reynolds Number ◽  
Dynamic Stall ◽  
Numerical Investigations ◽  
Low Reynolds Number Flow ◽  
Reynolds Number Flow ◽  
Number Flow ◽  
Low Reynolds

Optimal motion control of three-sphere based low-Reynolds number swimming microrobot

Robotica ◽  
2021 ◽  
pp. 1-17
Author(s):  
Hossein Nejat Pishkenari ◽  
Matin Mohebalhojeh
Keyword(s):  
Reynolds Number ◽  
Low Reynolds Number ◽  
Optimal Controller ◽  
Optimal Motion ◽  
Low Reynolds Number Flow ◽  
Reynolds Number Flow ◽  
Three Sphere ◽  
Low Reynolds Number Swimming ◽  
Number Flow ◽  
Low Reynolds

Abstract Microrobots with their promising applications are attracting a lot of attention currently. A microrobot with a triangular mechanism was previously proposed by scientists to overcome the motion limitations in a low-Reynolds number flow; however, the control of this swimmer for performing desired manoeuvres has not been studied yet. Here, we have proposed some strategies for controlling its position. Considering the constraints on arm lengths, we proposed an optimal controller based on quadratic programming. The simulation results demonstrate that the proposed optimal controller can steer the microrobot along the desired trajectory as well as minimize fluctuations of the actuators length.

Sign in / Sign up

Export Citation Format

Share Document