Dynamics of Heat Exchangers and Their Models

1960 ◽  
Vol 82 (2) ◽  
pp. 489-500 ◽  
Author(s):  
Herman Thal-Larsen
Keyword(s):  
Heat Exchanger ◽  
Frequency Response ◽  
Heat Exchangers ◽  
Dynamic Interaction ◽  
Secondary Effects ◽  
Mental Images ◽  
Average Temperature ◽  
Actual Experiment ◽  
Basic Characteristics

The author rejects, momentarily, actual experimentation with real heat exchangers for logical cogitation and arm-chair experiments. Observed as mental images or models, these heat exchangers reveal their basic characteristics—characteristics that will be partially obscured in an actual experiment by secondary effects inherent in the equipment. These basic characteristics, once perceived, may be used to correlate by means of frequency-response diagrams many results heretofore diverse and seemingly unrelated, that have been reported in the literature. Included among such results are not only the dynamics of various types of heat exchangers but also the thermal dynamic interaction between fluids and the confining pipe used for their transport. In addition, the author warns that all too frequently the use of the average temperature in heat-exchanger dynamics is based on faulty logic.

scholarly journals Evaluate the thermal performance of the dryer using a perforated wall furnace-heat exchanger for drying

2021 ◽  
Vol 2 (2) ◽  
pp. 084-090
Author(s):  
Ida Bagus Alit ◽  
I Gede Bawa Susana
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Room Temperature ◽  
Environmental Temperature ◽  
Test Results ◽  
Rice Husks ◽  
Average Temperature ◽  
Air Circulation ◽  
Drying Chamber ◽  
Pipe Heat

The use of heat exchangers for the process of energy conversion from rice husks to thermal as an alternative to replacing sun drying. Drying with rice husk energy and heat exchanger does not depend on the weather. To determine the effectiveness of this dryer, a thermal evaluation was carried out on the heat exchanger and drying chamber with a sample of 4 kg of shelled corn. The test results showed an increase in the drying temperature of 112.31%. The increase occurred from an average environmental temperature of 30.30oC to an average drying room temperature of 64.33oC. The temperature increased significantly by 34.03oC. This increase in temperature is a result of the use of a black steel pipe heat exchanger, rice husks, and the number of holes in the furnace wall that function as air circulation to help the process of burning rice husks. The distribution of the average temperature on each shelf in the drying room is rack 1 (Ts1) 76.79oC, shelf 2 (Ts2) 65.24oC, shelf 3 (Ts3) 59.77oC, and shelf 4 (Ts4) 55. 52oC.

Analysis of the Thermal Stress at the Tubesheet in Floating-Head or U-Tube Heat Exchangers

2017 ◽  
Vol 139 (2) ◽  
Author(s):  
Jiuyi Liu ◽  
Caifu Qian ◽  
Huifang Li
Keyword(s):  
Thermal Stress ◽  
Heat Exchanger ◽  
Temperature Difference ◽  
Heat Exchangers ◽  
Influence Factors ◽  
Area Ratio ◽  
Shell Side ◽  
Tube Heat Exchanger ◽  
Numerical Tests ◽  
Hole Area

Thermal stress is an important factor influencing the strength of a heat exchanger tubesheet. Some studies have indicated that, even in floating-head or U-tube heat exchangers, the thermal stress at the tubesheet is significant in magnitude. For exploring the value, distribution, and the influence factors of the thermal stress at the tubesheet of these kind heat exchangers, a tubesheet and triangle arranged tubes with the tube diameter of 25 mm were numerically analyzed. Specifically, the thermal stress at the tubesheet center is concentrated and analyzed with changing different parameters of the tubesheet, such as the temperature difference between tube-side and shell-side fluids, tubesheet diameter, thickness, and the tube-hole area ratio. It is found that the thermal stress of the tubesheet of floating-head or U-tube heat exchanger was comparable in magnitude with that produced by pressures, and the distribution of the thermal stress depends on the tube-hole area and the temperature inside the tubes. The thermal stress at the center of the tubesheet surface is high when tube-hole area ratio is very low. And with increasing the tube-hole area ratio, the stress first decreases rapidly and then increases linearly. A formula was numerically fitted for calculating the thermal stress at the tubesheet surface center which may be useful for the strength design of the tubesheet of floating-head or U-tube heat exchangers when considering the thermal stress. Numerical tests show that the fitted formula can meet the accuracy requirements for engineering applications.

Application of Equipartition of Entransy Loss Principle in Heat Exchangers

2012 ◽  
Vol 629 ◽  
pp. 699-703
Author(s):  
Chun Sheng Guo ◽  
Wen Jing Du ◽  
Lin Cheng
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Optimization Design ◽  
Loss Rate ◽  
Plate Heat Exchanger ◽  
Loss Minimization ◽  
Plate Heat ◽  
Entransy Loss ◽  
Heat Exchanges ◽  
Minimization Approach

The entransy loss minimization approach for the heat exchanger optimization design was established by Guo Z Y; the study based Guo Z Y’s works, found relationship between the entransy loss uniformity and the heat exchanger performance and the expression of the local entransy loss rate for heat convection was derived, numerical results of the heat transfer in a chevron plate heat exchanger and helix baffle heat exchanger show that the larger entransy loss uniformity factor appear in about Re=2000 and the entransy loss uniformity factor of chevron plate heat exchanges higher than helix baffle one.

Development of Heat Exchanger Fouling Model and Preventive Maintenance Diagnostic Tool

2007 ◽  
Vol 2 (2) ◽  
Author(s):  
H. Zabiri ◽  
V. R. Radhakrishnan ◽  
M. Ramasamy ◽  
N. M. Ramli ◽  
V. Do Thanh ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Predictive Model ◽  
Diagnostic Tool ◽  
Preventive Maintenance ◽  
Heat Exchangers ◽  
Waste Heat ◽  
A Priori ◽  
Transfer Efficiency ◽  
Heat Transfer Efficiency

The Crude Preheat Train (CPT) is a set of large heat exchangers which recover the waste heat from product streams back to preheat the crude oil. The overall heat transfer coefficient in these heat exchangers may be significantly reduced due to fouling. One of the major impacts of fouling in CPT operation is the reduced heat transfer efficiency. The objective of this paper is to develop a predictive model using statistical methods which can a priori predict the rate of the fouling and the decrease in heat transfer efficiency in a heat exchanger in a crude preheat train. This predictive model will then be integrated into a preventive maintenance diagnostic tool to plan the cleaning of the heat exchanger to remove the fouling and bring back the heat exchanger efficiency to their peak values. The fouling model was developed using historical plant operating data and is based on Neural Network. Results show that the predictive model is able to predict the shell and tube outlet temperatures with excellent accuracy, where the Root Mean Square Error (RMSE) obtained is less than 1%, correlation coefficient R2 of approximately 0.98 and Correct Directional Change (CDC) values of more than 90%. A preliminary case study shows promising indication that the predictive model may be integrated into a preventive maintenance scheduling for the heat exchanger cleaning.

The Effect of Longitudinal Heat Conduction on Periodic-Flow Heat Exchanger Performance

1964 ◽  
Vol 86 (2) ◽  
pp. 105-117 ◽  
Author(s):  
G. D. Bahnke ◽  
C. P. Howard
Keyword(s):  
Heat Conduction ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Zero Element ◽  
General Purpose ◽  
Periodic Flow ◽  
Gas Streams ◽  
Flow Heat ◽  
Area Use ◽  
Significant Figures

A numerical finite-difference method of calculating the effectiveness for the periodic-flow type heat exchanger accounting for the effect of longitudinal heat conduction in the direction of fluid flow is presented. The method considers the metal stream in crossflow with each of the gas streams as two separate but dependent heat exchangers. To accommodate the large number of divisions necessary for accuracy and extrapolation to zero element area, use was made of a general purpose digital computer. The values of the effectiveness thus obtained are good to four significant figures while those values for the conduction effect are good to three significant figures. The exchanger effectiveness and conduction effect have been evaluated over the following range of dimensionless parameters. 1.0⩾Cmin/Cmax⩾0.901.0⩽Cr/Cmin⩽∞1.0⩽NTU0⩽1001.0⩾(hA)*⩾0.251.0⩾As*⩾0.250.01⩽λ⩽0.32

Heat Transfer Performance of Different Nanofluids Flows in a Helically Coiled Heat Exchanger

2013 ◽  
Vol 832 ◽  
pp. 160-165 ◽  
Author(s):  
Mohammad Alam Khairul ◽  
Rahman Saidur ◽  
Altab Hossain ◽  
Mohammad Abdul Alim ◽  
Islam Mohammed Mahbubul
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Transfer Coefficient ◽  
Friction Factor ◽  
Heat Exchangers ◽  
Heat Transfer Performance ◽  
Volume Concentration ◽  
Transfer Performance

Helically coiled heat exchangers are globally used in various industrial applications for their high heat transfer performance and compact size. Nanofluids can provide excellent thermal performance of this type of heat exchangers. In the present study, the effect of different nanofluids on the heat transfer performance in a helically coiled heat exchanger is examined. Four different types of nanofluids CuO/water, Al2O3/water, SiO2/water, and ZnO/water with volume fractions 1 vol.% to 4 vol.% was used throughout this analysis and volume flow rate was remained constant at 3 LPM. Results show that the heat transfer coefficient is high for higher particle volume concentration of CuO/water, Al2O3/water and ZnO/water nanofluids, while the values of the friction factor and pressure drop significantly increase with the increase of nanoparticle volume concentration. On the contrary, low heat transfer coefficient was found in higher concentration of SiO2/water nanofluids. The highest enhancement of heat transfer coefficient and lowest friction factor occurred for CuO/water nanofluids among the four nanofluids. However, highest friction factor and lowest heat transfer coefficient were found for SiO2/water nanofluids. The results reveal that, CuO/water nanofluids indicate significant heat transfer performance for helically coiled heat exchanger systems though this nanofluids exhibits higher pressure drop.

scholarly journals Study of the Performance of a Novel Radiator with Three Inlets and One Outlet Based on Topology Optimization

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 594
Author(s):  
Tao Zhou ◽  
Bingchao Chen ◽  
Huanling Liu
Keyword(s):  
Topology Optimization ◽  
Heat Exchanger ◽  
Temperature Difference ◽  
Heat Exchangers ◽  
Exchange Capacity ◽  
Numerical Results ◽  
Fluid Temperature ◽  
Channel Depth ◽  
Goal Model ◽  
Flow And Heat Transfer

In recent years, in order to obtain a radiator with strong heat exchange capacity, researchers have proposed a lot of heat exchangers to improve heat exchange capacity significantly. However, the cooling abilities of heat exchangers designed by traditional design methods is limited even if the geometric parameters are optimized at the same time. However, using topology optimization to design heat exchangers can overcome this design limitation. Furthermore, researchers have used topology optimization theory to designed one-to-one and many-to-many inlet and outlet heat exchangers because it can effectively increase the heat dissipation rate. In particular, it can further decrease the hot-spot temperature for many-to-many inlet and outlet heat exchangers. Therefore, this article proposes novel heat exchangers with three inlets and one outlet designed by topology optimization to decrease the fluid temperature at the outlet. Subsequently, the effect of the channel depth on the heat exchanger design is also studied. The results show that the type of exchanger varies with the channel depth, and there exists a critical depth value for obtaining the minimum substrate temperature difference. Then, the flow and heat transfer performance of the heat exchangers are numerically investigated. The numerical results show that the heat exchanger derived by topology optimization with the minimum temperature difference as the goal (Model-2) is the best design for flow and heat transfer performance compared to other heat sink designs, including the heat exchanger derived by topology optimization having the average temperature as the goal (Model-1) and conventional straight channels (Model-3). The temperature difference of Model-1 can be reduced by 37.5%, and that of Model-2 can be decreased by 62.5% compared to Model-3. Compared with Model-3, the thermal resistance of Model-1 can be reduced by 21.86%, while that of Model-2 can be decreased by 47.99%. At room temperature, we carried out the forced convention experimental test for Model-2 to measure its physical parameters (temperature, pressure drop) to verify the numerical results. The error of the average wall temperature between experimental results and simulation results is within 2.6 K, while that of the fluid temperature between the experimental and simulation results is within 1.4 K, and the maximum deviation of the measured Nu and simulated Nu was less than 5%. This indicated that the numerical results agreed well with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document