The Influence of the Equilibrium Dissociation of a Diatomic Gas on Brayton-Cycle Performance

1963 ◽  
Vol 30 (2) ◽  
pp. 288-290 ◽  
Author(s):  
T. A. Jacobs ◽  
J. R. Lloyd
Keyword(s):  
Low Temperature ◽  
Diatomic Molecule ◽  
Thermal Efficiency ◽  
Cycle Performance ◽  
Brayton Cycle ◽  
Diatomic Gas ◽  
Equilibrium Dissociation

By employing the Lighthill “ideal dissociating gas” approximation, the influence of the equilibrium dissociation of a diatomic molecule on Brayton-cycle performance is demonstrated. For low-temperature ratios it is shown that the use of a suitably selected molecule results in a significant improvement in cycle thermal efficiency.

A Study of s-CO2 Power Cycle for CSP Applications Using an Isothermal Compressor

2017 ◽  
Author(s):  
Jin Young Heo ◽  
Yoonhan Ahn ◽  
Jeong Ik Lee
Keyword(s):  
Thermal Efficiency ◽  
Rankine Cycle ◽  
Cycle Performance ◽  
Working Fluid ◽  
Brayton Cycle ◽  
Compression Process ◽  
Power Cycle ◽  
Compressor Inlet ◽  
Inlet Conditions ◽  
Recompression Cycle

For the concentrating solar power (CSP) applications, the supercritical carbon dioxide (s-CO2) power cycle is beneficial in many aspects, including higher cycle efficiencies, reduced component sizing, and potential for the dry cooling option, in comparison to the conventional steam Rankine cycle. Increasing number of investigations and research projects are involved in improving this technology to realize the s-CO2 cycle as a candidate to replace the conventional power conversion systems. In this conceptual study, an isothermal compressor, a turbomachine which undergoes the compression process at constant temperature to minimize compression work, is applied to the s-CO2 power cycle layout. To investigate the cycle performance changes of adopting the novel technology, a framework for defining the efficiency of the isothermal compressor is revised and suggested. This study demonstrates how the compression work for the isothermal compressor is reduced compared to that of the conventional compressor under varying compressor inlet conditions. Furthermore, the recompression Brayton cycle layout using s-CO2 as a working fluid is evaluated for the CSP applications. Results show that for compressor inlet temperatures (CIT) near the critical point, the simple recuperated Brayton cycle with an isothermal compressor performs better than the given reference recompression cycle by 6–10% points in terms of cycle thermal efficiency. For higher CIT values, the recompression cycle using an isothermal compressor can perform above 50% in thermal efficiency. Adopting an isothermal compressor in the s-CO2 layout, however, can imply larger heat exchange area for the compressor which requires further detailed design for realization in the future.

scholarly journals Four-Objective Optimizations for an Improved Irreversible Closed Modified Simple Brayton Cycle

Entropy ◽  
2021 ◽  
Vol 23 (3) ◽  
pp. 282 ◽  
Author(s):  
Chenqi Tang ◽  
Lingen Chen ◽  
Huijun Feng ◽  
Yanlin Ge
Keyword(s):  
Power Density ◽  
Power Output ◽  
Thermal Efficiency ◽  
Variable Temperature ◽  
Ecological Function ◽  
Cycle Performance ◽  
Heating Process ◽  
Brayton Cycle ◽  
Nsga Ii ◽  
Deviation Index

An improved irreversible closed modified simple Brayton cycle model with one isothermal heating process is established in this paper by using finite time thermodynamics. The heat reservoirs are variable-temperature ones. The irreversible losses in the compressor, turbine, and heat exchangers are considered. Firstly, the cycle performance is optimized by taking four performance indicators, including the dimensionless power output, thermal efficiency, dimensionless power density, and dimensionless ecological function, as the optimization objectives. The impacts of the irreversible losses on the optimization results are analyzed. The results indicate that four objective functions increase as the compressor and turbine efficiencies increase. The influences of the latter efficiency on the cycle performances are more significant than those of the former efficiency. Then, the NSGA-II algorithm is applied for multi-objective optimization, and three different decision methods are used to select the optimal solution from the Pareto frontier. The results show that the dimensionless power density and dimensionless ecological function compromise dimensionless power output and thermal efficiency. The corresponding deviation index of the Shannon Entropy method is equal to the corresponding deviation index of the maximum ecological function.

Performance Comparison and Parametric Analysis of sCO2 Power Cycles Configurations

2018 ◽  
Author(s):  
Ali S. Alsagri ◽  
Andrew Chiasson ◽  
Ahmad Aljabr
Keyword(s):  
Power Output ◽  
Thermal Efficiency ◽  
Performance Comparison ◽  
Specific Power ◽  
Brayton Cycle ◽  
Computationally Efficient ◽  
Power Cycles ◽  
Optimization Study ◽  
Specific Power Output ◽  
Improve Calculation

A thermodynamic analysis and optimization of four supercritical CO2 Brayton cycles were conducted in this study in order to improve calculation accuracy; the feasibility of the cycles; and compare the cycles’ design points. In particular, the overall thermal efficiency and the power output are the main targets in the optimization study. With respect to improving the accuracy of the analytical model, a computationally efficient technique using constant conductance (UA) to represent heat exchanger performances is executed. Four Brayton cycles involved in this compression analysis, simple recaptured, recompression, pre-compression, and split expansion. The four cycle configurations were thermodynamically modeled and optimized based on a genetic algorithm (GA) using an Engineering Equation Solver (EES) software. Results show that at any operating condition under 600 °C inlet turbine temperature, the recompression sCO2 Brayton cycle achieves the highest thermal efficiency. Also, the findings show that the simple recuperated cycle has the highest specific power output in spite of its simplicity.

A Comparison Study for Off-Design Performance Prediction of a Supercritical CO2 Compressor With Similitude Analysis

2019 ◽  
Author(s):  
Yongju Jeong ◽  
Seongmin Son ◽  
Seong kuk Cho ◽  
Seungjoon Baik ◽  
Jeong Ik Lee
Keyword(s):  
Critical Point ◽  
Supercritical Co2 ◽  
Power Plants ◽  
Cycle Performance ◽  
Working Fluid ◽  
Brayton Cycle ◽  
Power Cycle ◽  
Design Performance ◽  
Wide Range ◽  
Phase Fluid

Abstract Most of the power plants operating nowadays mainly have adopted a steam Rankine cycle or a gas Brayton cycle. To devise a better power conversion cycle, various approaches were taken by researchers and one of the examples is an S-CO2 (supercritical CO2) power cycle. Over the past decades, the S-CO2 power cycle was invented and studied. Eventually the cycle was successful for attracting attentions from a wide range of applications. Basically, an S-CO2 power cycle is a variation of a gas Brayton cycle. In contrast to the fact that an ordinary Brayton cycle operates with a gas phase fluid, the S-CO2 power cycle operates with a supercritical phase fluid, where temperatures and pressures of working fluid are above the critical point. Many advantages of S-CO2 power cycle are rooted from its novel characteristics. Particularly, a compressor in an S-CO2 power cycle operates near the critical point, where the compressibility is greatly reduced. Since the S-CO2 power cycle greatly benefits from the reduced compression work, an S-CO2 compressor prediction under off-design condition has a huge impact on overall cycle performance. When off-design operations of a power cycle are considered, the compressor performance needs to be specified. One of the approaches for a compressor off-design performance evaluation is to use the correction methods based on similitude analysis. However, there are several approaches for deriving the equivalent conditions but none of the approaches has been thoroughly examined for S-CO2 conditions based on data. The purpose of this paper is comparing these correction models to identify the best fitted approach, in order to predict a compressor off-design operation performance more accurately from limited amount of information. Each correction method was applied to two sets of data, SCEIL experiment data and 1D turbomachinery code off-design prediction code generated data, and evaluated in this paper.

Simple Recuperated s-CO2 Cycle Revisited: Optimization of Operating Parameters for Maximum Cycle Efficiency

2019 ◽  
Author(s):  
Anchit Dutta ◽  
Adhip Gupta ◽  
Sharath Sathish ◽  
Aman Bandooni ◽  
Pramod Kumar
Keyword(s):  
Design Of Experiments ◽  
Design Space ◽  
Pressure Ratio ◽  
Cycle Performance ◽  
Maximum Temperature ◽  
Brayton Cycle ◽  
High Side ◽  
Side Pressure ◽  
Cycle Efficiency ◽  
The Impact

Abstract The paper presents modeling and Design of Experiments (DOE) analysis for a simple recuperated s-CO2 closed loop Brayton cycle operating at a maximum temperature of 600°C and a compressor inlet temperature of 45°C. The analysis highlights the impact of isentropic efficiencies of the turbine and compressor, decoupled in this case, on other equipment such as recuperator, gas cooler and heater, all of which have a bearing on the overall performance of the s-CO2 Brayton cycle. A MATLAB program coupled with REFPROP is used to perform the thermodynamic analysis of the cycle. A design space exploration with a Design of Experiments (DOE) study is undertaken using I-sight™ (multi-objective optimization software), which is coupled with the MATLAB code. The outcome of the DOE study provides the optimal pressure ratios and high side pressures for maximum cycle efficiency in the design space. By varying pressure ratios along with a floating high side pressure, the analysis reveals that the cycle performance exhibits a peak around a pressure ratio of 2.5, with cycle efficiency being the objective function. A further interesting outcome of the DOE study reveals that the isentropic efficiencies of the compressor and turbine have a strong influence not only on the overall cycle efficiency, but also the optimum pressure ratio as well as the threshold pressures (low as well as high side pressure). An important outcome of this exercise shows that the isentropic efficiency of the turbine has a much greater impact on the overall cycle performance as compared to that of the compressor.

A Study of Supercritical Carbon Dioxide Power Cycle for Concentrating Solar Power Applications Using an Isothermal Compressor

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Jin Young Heo ◽  
Jinsu Kwon ◽  
Jeong Ik Lee
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
Thermal Efficiency ◽  
Solar Power ◽  
Working Fluid ◽  
Brayton Cycle ◽  
Concentrating Solar Power ◽  
Power Cycle ◽  
Compressor Inlet ◽  
Supercritical Carbon

For the concentrating solar power (CSP) applications, the supercritical carbon dioxide (s-CO2) power cycle is beneficial in many aspects, including high cycle efficiencies, reduced component sizing, and potential for the dry cooling option. More research is involved in improving this technology to realize the s-CO2 cycle as a candidate to replace the conventional power conversion systems for CSP applications. In this study, an isothermal compressor, a turbomachine which undergoes the compression process at constant temperature to minimize compression work, is applied to the s-CO2 power cycle layout. To investigate the cycle performance changes of adopting the novel technology, a framework for defining the efficiency of the isothermal compressor is revised and suggested. This study demonstrates how the compression work for the isothermal compressor is reduced, up to 50%, compared to that of the conventional compressor under varying compressor inlet conditions. Furthermore, the simple recuperated and recompression Brayton cycle layouts using s-CO2 as a working fluid are evaluated for the CSP applications. Results show that for compressor inlet temperatures (CIT) near the critical point, the recompression Brayton cycle using an isothermal compressor has 0.2–1.0% point higher cycle thermal efficiency compared to its reference cycle. For higher CIT values, the recompression cycle using an isothermal compressor can perform above 50% in thermal efficiency for a wider range of CIT than the reference cycle. Adopting an isothermal compressor in the s-CO2 layout can imply larger heat exchange area for the compressor which requires further development.

The role of the diffusion-limited injection in direct dual fuel stratification

2016 ◽  
Vol 18 (4) ◽  
pp. 351-365 ◽  
Author(s):  
Martin Wissink ◽  
Rolf Reitz
Keyword(s):  
Low Temperature ◽  
Heat Release ◽  
Thermal Efficiency ◽  
Soot Formation ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Low Temperature Combustion ◽  
Fuel Stratification ◽  
Diffusion Limited ◽  
Temperature Combustion

Low-temperature combustion offers an attractive combination of high thermal efficiency and low NO x and soot formation at moderate engine load. However, the kinetically-controlled nature of low-temperature combustion yields little authority over the rate of heat release, resulting in a tradeoff between load, noise, and thermal efficiency. While several single-fuel strategies have achieved full-load operation through the use of equivalence ratio stratification, they uniformly require retarded combustion phasing to maintain reasonable noise levels, which comes at the expense of thermal efficiency and combustion stability. Previous work has shown that control over heat release can be greatly improved by combining reactivity stratification in the premixed charge with a diffusion-limited injection that occurs after low-temperature heat release, in a strategy called direct dual fuel stratification. While the previous work has shown how the heat release control offered by direct dual fuel stratification differs from other strategies and how it is enabled by the reactivity stratification created by using two fuels, this paper investigates the effects of the diffusion-limited injection. In particular, the influence of fuel selection and the pressure, timing, and duration of the diffusion-limited injection are examined. Diffusion-limited injection fuel type had a large impact on soot formation, but no appreciable effect on performance or other emissions. Increasing injection pressure was observed to decrease filter smoke number exponentially while improving combustion efficiency. The timing and duration of the diffusion-limited injection offered precise control over the heat release event, but the operating space was limited by a tradeoff between NO x and soot.

Sign in / Sign up

Export Citation Format

Share Document