Bending of Circular Plates Under a Uniform Load on a Concentric Circle—Part II

1968 ◽  
Vol 90 (2) ◽  
pp. 279-293
Author(s):  
J. C. Heap
Keyword(s):  
Boundary Conditions ◽  
Circular Plate ◽  
Concentric Circle ◽  
Outer Edge ◽  
Circular Plates ◽  
Uniform Load ◽  
Simply Supported ◽  
Basic Equations

The basic equations of deflection, slope, and moments for a thin, flat, circular plate subjected to a uniform load on a concentric circle were derived for four generalized cases. From these generalized cases, six simplified cases were deduced. The four generalized cases have the uniform load acting on a concentric circle of the plate between the inner and outer edges, with the following boundary conditions: (a) Outer edge supported and fixed, inner edge fixed; (b) outer edge simply supported, inner edge free; (c) outer edge simply supported, inner edge fixed; and (d) outer edge supported and fixed, inner edge free.

Bending of Circular Plates Under a Variable Symmetrical Load—Part I

1968 ◽  
Vol 90 (2) ◽  
pp. 268-278 ◽  
Author(s):  
J. C. Heap
Keyword(s):  
Radial Distance ◽  
Outer Edge ◽  
Variable Load ◽  
Constant Force ◽  
Circular Plates ◽  
Simply Supported ◽  
Inner Radius ◽  
Solid Plate ◽  
Basic Equations ◽  
Symmetrical Load

The basic equations of deflection, slope, and moment for a thin, flat, circular plate, under a symmetrical variable load, for a constant force divided by the square of the radial distance, have been developed. Six cases have been derived. The first four cases cover the variable load acting over the entire plate, viz., (a) fixed, supported, outer edge and fixed, inner edge, (b) simply supported, outer edge and free, inner edge, (c) simply supported, outer edge and fixed, inner edge, (d) fixed, supported, outer edge and free, inner edge; and the final two cases are for a solid plate having the acting variable load bounded by circles of an inner radius and the outer support-load-radius; i.e., (e) fixed, supported, outer edge and (f) simply supported, outer edge.

scholarly journals Thermoelastic coupling vibration and stability analysis of rotating circular plate in friction clutch

2018 ◽  
Vol 38 (2) ◽  
pp. 558-573 ◽  
Author(s):  
Yongqiang Yang ◽  
Zhongmin Wang ◽  
Yongqin Wang
Keyword(s):  
Differential Equation ◽  
Boundary Conditions ◽  
Circular Plate ◽  
Coupling Coefficient ◽  
Inertial Force ◽  
Angular Speed ◽  
Circular Plates ◽  
Thermoelastic Coupling ◽  
Coupling Vibration ◽  
Friction Clutch

Rotating friction circular plates are the main components of a friction clutch. The vibration and temperature field of these friction circular plates in high speed affect the clutch operation. This study investigates the thermoelastic coupling vibration and stability of rotating friction circular plates. Firstly, based on the middle internal forces resulting from the action of normal inertial force, the differential equation of transverse vibration with variable coefficients for an axisymmetric rotating circular plate is established by thin plate theory and thermal conduction equation considering deformation effect. Secondly, the differential equation of vibration and corresponding boundary conditions are discretized by the differential quadrature method. Meanwhile, the thermoelastic coupling transverse vibrations with three different boundary conditions are calculated. In this case, the change curve of the first two-order dimensionless complex frequencies of the rotating circular plate with the dimensionless angular speed and thermoelastic coupling coefficient are analyzed. The effects of the critical dimensionless thermoelastic coupling coefficient and the critical angular speed on the stability of the rotating circular plate with simply supported and clamped edges are discussed. Finally, the relation between the critical divergence speed and the dimensionless thermoelastic coupling coefficient is obtained. The results provide the theoretical basis for optimizing the structure and improving the dynamic stability of friction clutches.

Large Deflections of Circular Plates of Variable Thickness

1982 ◽  
Vol 49 (1) ◽  
pp. 243-245 ◽  
Author(s):  
B. Banerjee
Keyword(s):  
Circular Plate ◽  
Variable Thickness ◽  
Large Deflection ◽  
Numerical Results ◽  
Large Deflections ◽  
Circular Plates ◽  
Uniform Load ◽  
Plate Of Variable Thickness ◽  
Plates Of Variable Thickness

The large deflection of a clamped circular plate of variable thickness under uniform load has been investigated using von Karman’s equations. Numerical results obtained for the deflections and stresses at the center of the plate have been given in tabular forms.

Experiments on the Buckling of Simply-Supported Rectangular Plates

1969 ◽  
Vol 73 (703) ◽  
pp. 607-608 ◽  
Author(s):  
A. C. Mills
Keyword(s):  
Experimental Investigation ◽  
Theoretical Analysis ◽  
Boundary Conditions ◽  
Buckling Load ◽  
Theoretical Solution ◽  
Rectangular Plates ◽  
Uniform Load ◽  
Simply Supported

In ref. (1) Pope presents a theoretical analysis of the buckling of rectangular plates tapered in thickness under uniform load in the direction of taper. An experimental investigation into the end load buckling problem for a plate having simply-supported edges with the sides prevented from moving normally in the plane of the plate is described in ref. (2). For these boundary conditions the theoretical solution is exact. However, the compatability equation is not satisfied exactly when the sides are free to move in the plane of the plate. This experimental investigation demonstrates that the buckling load is nevertheless adequately predicted by the analysis in these circumstances.

On limiting cases in the flexure of simply supported regular polygonal plates

1969 ◽  
Vol 65 (3) ◽  
pp. 831-834 ◽  
Author(s):  
K. Rajaiah ◽  
Akella Kameswara Rao
Keyword(s):  
Circular Plate ◽  
Regular Polygons ◽  
Circular Plates ◽  
Axisymmetric Loading ◽  
Simply Supported ◽  
Significant Factors

AbstractLimiting solutions are derived for the flexure of simply supported many-sided regular polygons, as the number of sides is increased indefinitely. It is shown that these solutions are different from those for simply supported circular plates. For axisymmetric loading, circular plate solutions overestimate the deflexions and the moments by significant factors.

Nonlinear Bending of Composite Circular Plates with Embedded Shape Memory Alloy Fibers

2008 ◽  
Vol 33-37 ◽  
pp. 501-506
Author(s):  
Shi Rong Li ◽  
Wen Shan Yu
Keyword(s):  
Shape Memory ◽  
Circular Plate ◽  
Mechanical Load ◽  
Constitutive Relations ◽  
Thin Plates ◽  
Circular Plates ◽  
Nonlinear Bending ◽  
One Dimensional ◽  
Bending Deformation ◽  
Simply Supported

Based on Brinson’s one-dimensional thermo-mechanical constitutive relations of shape memory alloys and the theory of thin plates in the von Kármán sense, the response of bending of a uniform heated circular plate embedded with SMA fibers in the radial directions and subjected to a uniform distributed mechanical load is studied. The characteristic curves of the central deflection versus temperature rise of the circular plate with both clamped and simply supported boundary conditions are obtained. The numerical results show that, the recovery forces of the pre-strained SMA caused by the phase transformation from martensite to austenite can modify the bending deformation significantly. So, it can be concluded that the bending deformation can be adjusted effectively and actively by embedment of the SMA fibers into the circular plates

Sign in / Sign up

Export Citation Format

Share Document