An Experimental Study of Forced-Convection Heat Transfer From a Sphere to Liquid Sodium

1968 ◽  
Vol 90 (1) ◽  
pp. 9-12 ◽  
Author(s):  
L. C. Witte
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Convection Heat Transfer ◽  
Reynolds Numbers ◽  
Liquid Sodium ◽  
Convection Heat ◽  
Transfer Rates ◽  
Experimental Heat ◽  
Experimental Heat Transfer ◽  
Heated Metal

Experimental heat-transfer rates from spheres moving through liquid sodium have been obtained. The experimental data were obtained by a transient technique in which a heated metal sphere was passed through a pool of liquid sodium. Heat-transfer rates up to 3.58 × 106 Btu/(hr)(ft2) were calculated from the experimental measurements. Reynolds numbers, based on the sphere velocity and diameter, ranged from 35,000 to 153,000. The experimental data were correlated by an expression similar to theoretical expressions obtained from potential-flow theory.

Effects of Free Convection and Axial Conduction on Forced-Convection Heat Transfer Inside a Vertical Channel at Low Peclet Numbers

1984 ◽  
Vol 106 (2) ◽  
pp. 297-303 ◽  
Author(s):  
L. C. Chow ◽  
S. R. Husain ◽  
A. Campo
Keyword(s):  
Heat Transfer ◽  
Free Convection ◽  
Forced Convection ◽  
Convection Heat Transfer ◽  
Vertical Channel ◽  
Reynolds Numbers ◽  
Convection Heat ◽  
Constant Property ◽  
Axial Conduction ◽  
Forced Convection Heat Transfer

A numerical investigation was conducted to study the simultaneous effects of free convection and axial conduction on forced-convection heat transfer inside a vertical channel at low Peclet numbers. Insulated entry and exit lengths were provided in order to assess the effect of upstream and downstream energy penetration due to axial conduction. The fluid enters the channel with a parabolic velocity and uniform temperature profiles. A constant-property (except for the buoyancy term), steady-state case was assumed for the analysis. Results were categorized into two main groups, the first being the case where the channel walls were hotter than the entering fluid (heating), and the second being the reverse of the first (cooling). For each group, heat transfer between the fluid and the walls were given as functions of the Grashof, Peclet, and Reynolds numbers.

Heat Transfer Performance of Aluminum Foams

2011 ◽  
Vol 133 (6) ◽  
Author(s):  
Simone Mancin ◽  
Claudio Zilio ◽  
Luisa Rossetto ◽  
Alberto Cavallini
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Pressure Drop ◽  
Fluid Dynamic ◽  
Foam Core ◽  
Aluminum Foams ◽  
Experimental Heat ◽  
High Heat Transfer ◽  
Experimental Heat Transfer ◽  
Core Height

Because of their interesting heat transfer and mechanical properties, metal foams have been proposed for several different applications, thermal and structural. This paper aims at pointing out the effective thermal fluid dynamic behavior of these new enhanced surfaces, which present high heat transfer area per unit of volume at the expense of high pressure drop. The paper presents the experimental heat transfer and pressure drop measurements relative to air flowing in forced convection through four different aluminum foams, when electrically heated. The tested aluminum foams present 5, 10, 20 and 40 PPI (pores per inch), porosity around 0.92–0.93, and 0.02 m of foam core height. The experimental heat transfer coefficients and pressure drops have been obtained by varying the air mass flow rate and the electrical power, which has been set at 25.0 kW m−2, 32.5 kW m−2, and 40.0 kW m−2. The results have been compared against those measured for 40 mm high samples, in order to study the effects of the foam core height on the heat transfer. Moreover, predictions from two recent models are compared with heat transfer coefficient and pressure drop experimental data. The predictions are in good agreement with experimental data.

Forced Convection Heat Transfer of Nanofluids: A Review

2017 ◽  
Author(s):  
Aditya Kuchibhotla ◽  
Debjyoti Banerjee
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Specific Heat ◽  
Forced Convection ◽  
Convection Heat Transfer ◽  
Convection Heat

Stable homogeneous colloidal suspensions of nanoparticles in a liquid solvents are termed as nanofluids. In this review the results for the forced convection heat transfer of nanofluids are gleaned from the literature reports. This study attempts to evaluate the experimental data in the literature for the efficacy of employing nanofluids as heat transfer fluids (HTF) and for Thermal Energy Storage (TES). The efficacy of nanofluids for improving the performance of compact heat exchangers were also explored. In addition to thermal conductivity and specific heat capacity the rheological behavior of nanofluids also play a significant role for various applications. The material properties of nanofluids are highly sensitive to small variations in synthesis protocols. Hence the scope of this review encompassed various sub-topics including: synthesis protocols for nanofluids, materials characterization, thermo-physical properties (thermal conductivity, viscosity, specific heat capacity), pressure drop and heat transfer coefficients under forced convection conditions. The measured values of heat transfer coefficient of the nanofluids varies with testing configuration i.e. flow regime, boundary condition and geometry. Furthermore, a review of the reported results on the effects of particle concentration, size, temperature is presented in this study. A brief discussion on the pros and cons of various models in the literature is also performed — especially pertaining to the reports on the anomalous enhancement in heat transfer coefficient of nanofluids. Furthermore, the experimental data in the literature indicate that the enhancement observed in heat transfer coefficient is incongruous compared to the level of thermal conductivity enhancement obtained in these studies. Plausible explanations for this incongruous behavior is explored in this review. A brief discussion on the applicability of conventional single phase convection correlations based on Newtonian rheological models for predicting the heat transfer characteristics of the nanofluids is also explored in this review (especially considering that nanofluids often display non-Newtonian rheology). Validity of various correlations reported in the literature that were developed from experiments, is also explored in this review. These comparisons were performed as a function of various parameters, such as, for the same mass flow rate, Reynolds number, mass averaged velocity and pumping power.

Convective Heat Transfer Enhancement With Nanofluids: The Effect of Temperature-Variable Thermal Conductivity

2010 ◽  
Author(s):  
Sezer O¨zerinc¸ ◽  
Almıla G. Yazıcıog˘lu ◽  
Sadık Kakac¸
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Thermal Conductivity ◽  
Heat Transfer Enhancement ◽  
Forced Convection ◽  
Convection Heat Transfer ◽  
Thermal Dispersion ◽  
Convection Heat ◽  
Transfer Enhancement ◽  
Experimental Values

A nanofluid is defined as the suspension of nanoparticles in a base liquid. Studies in the last decade have shown that significant amount of thermal conductivity and heat transfer enhancement can be obtained by using nanofluids. In the first part of this study, classical forced convection heat transfer correlations developed for pure fluids are used to predict the experimental values of heat transfer enhancement of nanofluids. It is seen that the experimental values of heat transfer enhancement exceed the enhancement predictions of the classical correlations. On the other hand, a recent correlation based on the thermal dispersion phenomenon created by the random motion of nanoparticles predicts the experimental data well. In the second part of the study, in order to further examine the validity of the thermal dispersion approach, a numerical analysis of forced convection heat transfer of Al2O3/water nanofluid inside a circular tube in the laminar flow regime is performed by utilizing single phase assumption. A thermal dispersion model is applied to the problem and variation of thermal conductivity with temperature and variation of thermal dispersion with local axial velocity are taken into account. The agreement of the numerical results with experimental data might be considered as an indication of the validity of the approach.

An Analytical Investigation of Free Convection Heat Transfer to Supercritical Water

1970 ◽  
Vol 92 (3) ◽  
pp. 345-350 ◽  
Author(s):  
E. S. Nowak ◽  
A. K. Konanur
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Free Convection ◽  
Supercritical Water ◽  
Thermophysical Properties ◽  
Convection Heat Transfer ◽  
Analytical Investigation ◽  
Convection Heat ◽  
Free Convection Heat ◽  
Vertical Flat Plate

Heat transfer to supercritical water (at 3400 psia in the pseudocritical region) by stable laminar free convection from an isothermal, vertical flat plate was analytically investigated. The actual variations with temperature of all or some of the thermophysical properties of supercritical water were taken into consideration. Fair agreement was found between the analytical values of this paper and existing experimental data.

Sign in / Sign up

Export Citation Format

Share Document