Analysis of a Planet Bearing in a Gear Transmission System

1976 ◽  
Vol 98 (1) ◽  
pp. 40-46 ◽  
Author(s):  
J. Y. Liu ◽  
Y. P. Chiu
Keyword(s):  
Load Distribution ◽  
High Speed ◽  
Roller Bearing ◽  
Arbitrary System ◽  
Inertial Forces ◽  
Elastic Ring ◽  
Gear Transmission System ◽  
Bearing Load ◽  
Planet Gear ◽  
Thin Elastic Ring

This paper develops a general theory whereby the effects of the elastic distortions of a planet bearing outer ring due to gear loads and inertial forces on the bearing load distribution and fatigue life can be considered. The analysis makes use of a recently developed solution for a thin elastic ring under an arbitrary system of loads. A numerical example for a planet gear roller bearing under heavy gear loads and operating at a high speed is presented.

Theoretical Study on the Influence of Planet Gear Rim Thickness and Bearing Clearance on Calculated Bearing Life

2019 ◽  
Vol 142 (3) ◽  
Author(s):  
Andreas Fingerle ◽  
Jonas Hochrein ◽  
Michael Otto ◽  
Karsten Stahl
Keyword(s):  
High Efficiency ◽  
Roller Bearing ◽  
The Body ◽  
Fem Model ◽  
Bearing Life ◽  
Bearing Load ◽  
Rolling Elements ◽  
Planet Gear ◽  
Cylindrical Roller Bearing ◽  
Cylindrical Roller

Abstract Planetary gearboxes are becoming more popular due to their high-power density and potentially high efficiency. When the planet bearings are internally mounted, the body of the planet gear has to be hollow. The demand for large outer diameters due to high-load requirements might result in a small planet rim thickness. Depending on the rim thickness, its rigidity may become very low. Due to the low stiffness and the special load conditions caused by the double meshing, the deformation of the planet and its bearings are unique. In this paper, the influence of rim thickness on bearing load and lifetime is examined. The analysis is performed with a finite element method (FEM) model of a planet rim with a built-in cylindrical roller bearing. With the resulting planet deformation from the FEM calculation, the load distribution on the rolling elements in the bearing and the bearing lifetime according to ISO/TS 16281:2008 has been evaluated.

Theoretical Study on the Influence of Planet Gear Rim Thickness and Bearing Clearance on Calculated Bearing Life

2019 ◽  
Author(s):  
Andreas Fingerle ◽  
Jonas Hochrein ◽  
Michael Otto ◽  
Karsten Stahl
Keyword(s):  
High Efficiency ◽  
Roller Bearing ◽  
The Body ◽  
Fem Model ◽  
Bearing Life ◽  
Bearing Load ◽  
Rolling Elements ◽  
Planet Gear ◽  
Cylindrical Roller Bearing ◽  
Cylindrical Roller

Abstract Planetary gearboxes are becoming more popular due to their high power density and potentially high efficiency. When the planet bearings are internally mounted, the body of the planet gear has to be hollow. The demand for large outer diameters due to high load requirements might result in a small planet rim thickness. Depending on the rim thickness, its rigidity may become very low. Due to the low stiffness and the special load conditions caused by the double meshing, the deformation of the planet and its bearings are unique. In this paper, the influence of rim thickness on bearing load and lifetime are examined. The analysis is performed with an FEM model of a planet rim with a built-in cylindrical roller bearing. With the resulting planet deformation from the FEM calculation, the load distribution on the rolling elements in the bearing and the bearing lifetime according to ISO/TS 16281:2008 have been evaluated.

Analysis of a Rolling-Element Idler Gear Bearing Having a Deformable Outer-Race Structure

1963 ◽  
Vol 85 (2) ◽  
pp. 273-278 ◽  
Author(s):  
A. B. Jones ◽  
T. A. Harris
Keyword(s):  
Fatigue Life ◽  
High Speed ◽  
Roller Bearing ◽  
Rolling Element Bearing ◽  
Outer Ring ◽  
Outer Race ◽  
Rolling Element ◽  
Rolling Elements ◽  
Planet Gear ◽  
Bearing Rings

Conventional calculations of ball and roller bearing carrying capacity and fatigue life assume that the raceway bodies are rigid structures and that all elastic deformation occurs at the rolling elements’ contact with the raceways. In many instances, and particularly with aircraft applications, the bearing rings and their supports cannot be considered rigid. One such application is the planet gear in a transmission. This report develops a theory whereby the effects of the elastic distortions of the outer race of a rolling-element bearing on the internal load distribution and fatigue life of the bearing can be considered. The theory has been programmed for a high-speed, digital computer. An example of calculation for a planet gear roller bearing whose outer race is integral with the gear and of relatively thin section is given. The distortions of the flexible outer ring cause a significantly lower bearing fatigue life (L10) than would occur if the outer ring were rigid and considering a practical range of bearing diametral clearances. Mr. Jones developed the theoretical analysis for this paper and Mr. Harris provided the programming and the experimental data.

Analysis of High-Speed Cylindrical Roller Bearing With Flexible Rings Mounted in a Squeeze Film Damper

2007 ◽  
Author(s):  
Cyril Defaye ◽  
Daniel Nelias ◽  
Florence Bon
Keyword(s):  
Gas Turbine ◽  
Load Distribution ◽  
High Speed ◽  
Roller Bearing ◽  
Squeeze Film ◽  
Turbine Engines ◽  
Radial Clearance ◽  
Elastic Coupling ◽  
Gas Turbine Engines ◽  
Squeeze Film Damper

For high-precision mechanical systems such as gas-turbine engines, which operate under extreme conditions, it is particularly important to accurately predict the behavior of the mainshaft rolling bearings. This prediction includes, among others, the load distribution, stiffness and power dissipation. Although shaft speeds tend to increase, rings and shaft walls are becoming thinner due to size and weight constraints. Thus, bearing behavior is no longer independent of the housing and ring stiffness. Furthermore, since forty years, the use of squeeze film damper is largely widespread in gas-turbine engines to significantly reduce the vibratory levels. Due to the flexibility of the ring providing the interface between the roller bearing and the fluid film, it appears an elastic coupling which modifies the behavior of the bearing-squeeze film damper system. This paper presents first a squeeze film damper model with a flexible inner ring (i.e. outer ring of the roller bearing). An analytical stop model is introduced to reproduce the interference between the inner ring of the squeeze film damper and its housing. In a second part, an elastic coupling between the presented squeeze film damper model and an existing roller bearing model is proposed. Finally, the results presented show that this coupling has a first order influence on the behavior of the bearing-squeeze film damper system. It is also shown that the coupling between a roller bearing and a squeeze film damper when linked by a flexible ring introduces a dissymmetry of the load distribution with respect to the applied load direction. Moreover, in certain cases, the position of the bearing in its housing can reach eccentricities larger than the radial clearance of the squeeze film damper.

Loss of lubricant from oil-lubricated near-starved spherical roller bearings

1997 ◽  
Vol 211 (1) ◽  
pp. 51-66 ◽  
Author(s):  
V Wikström ◽  
B Jacobson
Keyword(s):  
High Speed ◽  
Roller Bearing ◽  
Lubricant Film ◽  
Outer Ring ◽  
Shaft Speed ◽  
Roller Bearings ◽  
Bearing Load ◽  
Lubricant Viscosity ◽  
Oil Type

The time to lubricant film breakthrough in an oil-lubricated spherical roller bearing has been measured using SKF Lubcheck for various settings of bearing load, outer ring temperature, shaft speed and oil type and viscosity. The bearings were lubricated once and then run to film breakthrough with the aim of estimating the lubricant losses under different conditions. The result of the experiments supports the theory of lubricant replenishment, and it is shown that high speed combined with high lubricant viscosity will shorten the time to film breakthrough.

Optimum Design for Improvement of Roller Bearing Load Distribution in a Medium Scale Mill

2012 ◽  
Vol 215-216 ◽  
pp. 54-58 ◽  
Author(s):  
Ming Li ◽  
Li Na Sun
Keyword(s):  
Load Distribution ◽  
Roller Bearing ◽  
Heavy Duty ◽  
Dimensional Theory ◽  
Medium Scale ◽  
Light Duty ◽  
Bearing Load ◽  
Roll System ◽  
New Space ◽  
Long Life

In roller bearing reformation of a medium scale mill, the micro-dimensional theory of mill is adopted. A new space self-alignment roll system is developed, including a divided base. This ensures the statically determinate of the mill under both light duty and heavy duty conditions. So the load distribution of roller bearing can be improved, and the bearing will have a long life. Since the new roll system began to run, it is in a fine motion until now. The roller bearing has exceeded its specified life. The design aim of service longevity is realized.

Analysis of Counter-Rotating Roller Bearing in Different Mounting Configurations

2019 ◽  
Vol 141 (8) ◽  
Author(s):  
Wenjun Gao ◽  
Daniel Nelias ◽  
Zhenxia Liu
Keyword(s):  
Thermal Behavior ◽  
Load Distribution ◽  
Power Loss ◽  
High Speed ◽  
Roller Bearing ◽  
Total Power ◽  
Kinetic Behavior ◽  
Uniform Load ◽  
Roller Ring ◽  
Differential Speed

Advanced engine configuration studies have shown large advantages for an engine with counter-rotating spools with intershaft counter-rotating roller bearings. Mounted on two counter-rotating differential-speed hollow rotors, the bearing internal kinetic behavior, dynamic behavior, and then thermal behavior change greatly, causing a severe challenge to engine designers using traditional analysis methods. A special quasi-dynamic model for counter-rotating roller bearing is proposed, considering rings deformation and windage effects, to analyze the bearing mechanical and thermal behavior in different mounting configurations. Roller sliding and bearing heat generation are calculated and compared with experimental data to verify the model capabilities. It shows that the configuration that connects the inner ring to the high-speed rotor has life cycle advantage with more uniform load distribution, smaller roller/ring clearance, and lower cage speed. This leads to less drag loss due to the rotation of the rollers and cage assembly. The decrease of the total power loss is a key element to minimize the quantity of oil required to lubricate the roller bearing.

scholarly journals Improvement of Tilting-Pad Journal Bearing Operating Characteristics by Application of Eddy Grooves

Lubricants ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 18
Author(s):  
Eckhard Schüler ◽  
Olaf Berner
Keyword(s):  
High Speed ◽  
Journal Bearing ◽  
Load Capacity ◽  
Fluid Film ◽  
Operating Characteristics ◽  
Fluid Film Bearings ◽  
Tilting Pad ◽  
Bearing Load ◽  
Bearing Loads ◽  
Tilting Pad Journal Bearing

In high speed, high load fluid-film bearings, the laminar-turbulent flow transition can lead to a considerable reduction of the maximum bearing temperatures, due to a homogenization of the fluid-film temperature in radial direction. Since this phenomenon only occurs significantly in large bearings or at very high sliding speeds, means to achieve the effect at lower speeds have been investigated in the past. This paper shows an experimental investigation of this effect and how it can be used for smaller bearings by optimized eddy grooves, machined into the bearing surface. The investigations were carried out on a Miba journal bearing test rig with Ø120 mm shaft diameter at speeds between 50 m/s–110 m/s and at specific bearing loads up to 4.0 MPa. To investigate the potential of this technology, additional temperature probes were installed at the crucial position directly in the sliding surface of an up-to-date tilting pad journal bearing. The results show that the achieved surface temperature reduction with the optimized eddy grooves is significant and represents a considerable enhancement of bearing load capacity. This increase in performance opens new options for the design of bearings and related turbomachinery applications.

Numerical and experimental studies on the thermal and static characteristics of multi-leaf foil thrust bearing

2021 ◽  
pp. 135065012110110
Author(s):  
Yu Guo ◽  
Yu Hou ◽  
Qi Zhao ◽  
Xionghao Ren ◽  
Shuangtao Chen ◽  
...  
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Failure Process ◽  
Experimental Studies ◽  
Elastic Model ◽  
Static Characteristics ◽  
Bearing Load ◽  
Foil Thrust Bearing ◽  
Cooling Air

Foil bearing is considered to be a promising supporting technology in high-speed centrifugal machinery. Due to the high-speed shearing effect in the viscous lubricant film, heat generation could not be ignored. In this paper, a thermo-elastic model of the multi-leaf foil thrust bearing is proposed to predict its thermal and static characteristics. In the model, modified Reynolds equation, energy equation, and Kirchhoff equation are solved in a coupling way. The contact area between the foil and welding plate is taken into account. Besides, the effect of cooling air on the bearing temperature is investigated. The ultimate load capacity and transient overload failure process of the bearing is analyzed and discussed. The effect of rotation speed on the bearing temperature is more obvious than that of the bearing load. The bearing temperature drops obviously by introducing the cooling air, and the cooling effect is improved with the supply pressure. The transient overload failure of the bearing occurs when the bearing load exceeds the ultimate value.

Sign in / Sign up

Export Citation Format

Share Document